Automatic Cutting Machine Dealers in Bangalore

• Wire Range: : 6mm to 12 mm capacity.
• Feeding speed: : 100 to 140 Mtr per minute approximately (variable speed drive – VFD)
• Cutting Length: : Adjustable cutting length
• Length Accuracy: : + / – 2 mm
• Main motor Drive: : Servo Motor, German make
• Cutting: : Hydraulic cutting with power pack
• Power requirement: : 21 KW Servo motor,, German make : 3.75 KW cutting motor, AC Motor.
• Cutter Actuation: : PLC Controlled (Pre programmed Logic Controller)
• Conveyor: : Rod Catching & Dropping system with counting arrangement
• Power Supply: : 415  VAC 50 Hz,   3 Phase + Wire System   

• Voltage: 440V
• Rated Power: 5 HP
• Automatic Grade: Automatic
• Capacity: 800 Ton
• Frequency: 50 Hz
• Material: Mild Steel

We are one of the leading organizations engaged in offering a wide range of CNC threading Machines for Columns & Casing Pipes-up to 4 inches. It is completely automatic and considered ideal to be used for socket up to 4 inches machining (CNC turning center with LM guide way bigger bore with hyd. Chuck). Available in Z axis-375 mm & X axis-150 mm Thread length & Diameter, these machines are in great demand due to their high performance, corrosion resistance & sturdy construction. These machines are integrated with different sizes of bore, which varies as per the clients' requirement i.e. 47 68 91 117 125 mm. All our products, including automatic pvc pipe threading machine, CNC rising pipe threading machine conforms to international quality standards. Our machines are acclaimed for high accuracy and precision. CNC interfaces have been made user friendly, so that the persons with low skills can also handle the machines effectively. We give proper instructions on usage and handling of the machines to our clients. Any post sales issue on automatic cnc pipe threading machines are addressed quickly and effectively by our technical team.

• Voltage: 220V
• Automatic Grade: Semi Automatic
• Weight: 200-250kg
• Power: 1-3kw

We have numerous dealers and distributors associated with us to make our products available to buyers with ease and make timely delivery. Obtain the extensive and affordable array of products that is available from our massive inventory in karnataka(india).

Complex Machine Equipment can be slitting rewinding spunlace cloth, wood pulp cloth, non-woven, meltblown, Jakob, spunbond nonwovens and, product cutting neat without burr, the machine for processing with or without mandrel, replacing a variety of equipment configuration according to requirements of customer product. For details, please contact us.

• Weight: 7 Kg
• Cutting Speed: 150 -800 mm/min
• Max Cutting Thickness: 5-30 mm
• I Deal In: New Only
• Size: 350x140x175 mm
• Quality: Good
• Ideal for: Industrial purpose

• Certification: CE Certified, ISO 9001:2008
• Color: Black, Brown, Grey
• Condition: New, Used
• Automatic Grade: Automatic, Manual
• Type: Laser Cutting Machine
• Voltage: 220V, 380V, 440V
• Warrenty: 1 Year, 2 Years

• Features: Automatic environmental protection, Optional Language HINDI, Fiber Cleaved Length

Performances and applications1. Product, high technical assurance, each performance index has exceeded the level of other counterparts.2. Load material: Electric roll material loading, which is easy and fast.3. Feed material: the photoelectric eye tracking system assures the synchronization of material feeding and die-cutting speed. Automatically fold and flatten the cornering materials at the paper core. It realized the multistage adjustment of the folding degree. No matter how bent the product is, it can be flatten or refolded towards other directions.5. It can die-cut according to the printed words and figures or simply die-cut without them. The coordination between stepping motor and photoelectric eye which can identify colors assures the perfectly fit of the die-cutting position and figures. Simply set the feed length through the micro-computer controller To die-cut the products without words and figures.6. Die-cutting area: 900mm*400mm. (it can also be tailored according to the customers’ requirements)7. Maximum die-cutting speed can be up to 9000 times/h, which indicates the significant high production efficiency.8. The die-cutting force is provided by a 7.5kw inverter motor driver. It is not only power-saving, but also can realize the stepless speed adjustment, especially when coordinate with the extra large flywheel, which make the die-cutting force strong and steady, and the electricity can be further reduced.9. Adapt flat bed die-cutting mode, and the cutting boards are extremely cheap.10. The oscillating lower cutting board makes the die-cutting process more steady compared to other similar products and magnificently increased the service life of the cutting board.11. Finished products are pulled out by two rollers. Comparing to other similar die-cutting machines which need extra press cutter to cut the joints, our machine can not only save the cost of press cutters of each machine, but also avoid the troubles of installing and debugging the press cutters, which can magnificently save time. Especially, it can assure better quality of the product appearance when the die-cutting without joints can be realized under many conditions.12. By the action of the entity induction switch, finished product will be automatically lowered down to remain the height of the pilling paper unchanged, during the whole die-cutting process, manual paper-taking is not needed.

• Running Speed: 40 Mtrs/ Minutes Maximum
• Cutting Speed: 60 Pieces /minute Maximum
• Cutting Length: 99999 MM Maximum
• Web Width: 4 to 10 cm

HYDRO Pneumatic Web Cutting Machine finds various applications in many industrial processes. Controller: PLC Allen Brodley USAHP Make, Running Speed: 40 Mtrs Minutes Maximum, Cutting Speed: 60 Pieces minute Maximum, Cutting Length: 99999 MM Maximum, Web Width: 4 to 10 cm, Length Adjustment: PLC, Accuracy: + 0.5 cm -00 cms, Web Making Blade: 2 Nos. Marking Distance: 30 cm min. to 150 cm maximum, Cutting Blade: Alloy Steel, Marking PenColour: Your Scope, Control System: Clutch Brake & Gear Box, Motor: 1 HP, 3 Phases, 415 V AC, 1440 RPM, Heater: 1600 Watts, Unwinding Unit: X10 CM 5 CM x 7 Roll x 750 Dia [Adjustable].

• Brand Name: LIHAO MACHINE, SAMDUN
• Categories: cut to length line
• Model: 0.3-3mm LH-CTL-650,850,1300,1600,1800,...
• Function: cut metal sheet strip
• Purpose: get metal sheet plates
• OEM Manufacturer: not trading company
• Good Design: automatic
• Terms of Payment: L/C,D/A,D_P,T/T
• Update Time: 02-06-2015

I. Function. Cut to length line, is an automatic transversal cutting production line, for cutting steel, aluminum, brass, etc, sheet stirp coil. Cut to length line, can uncoil metal strip coil, then straighten metal strip, then feed metal strip forth to shearing machine, then shearing machine cut metal strip transversely, in order get required length metal sheet plates, as per required length. II.Technical paramter Model Coil Maximum Width (mm) Strip Thickness (mm) Sheet Plate Length Coil Weight (ton) Floor Area (m) LH-CTL-650 100-620 0.3-2mm ＞300 1-5 2×15 LH-CTL-850 200-800 0.3-2mm ＞500 1-5 2.5×15 LH-CTL-1300 300-1250 0.3-2mm ＞550 1-15 4×18 LH-CTL-1500 600-1500 0.3-2mm ＞500 1-15 5×20 LH-CTL-1600 600-1600 0.3-2mm ＞500 1-20 7×20 LH-CTL-1800 800-1750 0.3-2mm ＞500 1-25 8×22 III.Main equipment or devices Coil car Uncoiler Straightener Supporting device NC servo roll feeder Shearing machine Conveyor feeder Stacking machine Loader Lifter Electrical control system Hydraulic system Pneumatic system Etc

• Weight: 45KG
• Rated Power: 120W
• Overall Dimensions: 400mm×350mm×320mm
• Material of Blade: High carbon high chrome steel

High speed and accurate 532nm diamond laser cutting system, offers the advantage of contactless cutting. It takes away a thin layer of diamond at each passage regardless of the hardness. Based on the latest green laser technology, YMS-8G laser diamond cutting machine is far more efficient than the IR laser and traditional diamond cutting machines.

• Type: Automatic Cable Cutting Machine
• Color: Grey
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Elecric
• Features: Low maintenance,High quality,High performance

We introduce our machine which has the ability to Straighten TMT Coil which is ready in coil format into very straight one and can be Cut it with fixed and Different sizes also.Various diameter TMT Bars,Plain Re-bars and Rods can also be straightened very effectively. So it is very useful and very less manpower required because of this ability of automatic operation. These machine can be used in steel industries,construction and various Rod work machineries Special Features: Type: Automatical Mechanical operation Wire Range: 8mm to 12 mm Feeding Speed: 120 Meters per Minutes Cutting Type: Fly Shear Cutting Cutting length:Adjustable cutting length and fixed Power Supply 415 VAC,50 Hz, 3 Phase wire system.

automatic block cutting machine, automatic gantry crane