Axial Fans Dealers in Bangalore

• Driven Type: Electric
• Color: Black
• Condition: New
• Automatic Grade: Automatic
• Voltage: 110V, 220V, 380V
• Type: Axial Fans
• Warranty: 1Year

MPN S4E450AQ0509 Description 230VAC, 450mm, 225W, 1350 RPM

• Voltage: 240 V
• Type: Wall Mounted Fan, Duct Mounted Fan
• Blade Material: Aluminium Casting
• Country of Origin: Made in India
• Fan Speed: 720 - 1400 rpm
• Brand: Blue Cold
• Frequency: 50/60 Hz
• Phase: Single Phase
• Usage/Application: Industrial

• Brand Name: Papst
• Type: Axial Fan
• Color: Black

Papst Multifan 4314 Axial Cooling Fan 24VDC 210mA 5W

• Brand Name: Oriental Motor co., ltd., Japan
• Place of Origin: Japan

Essence is the authorized sales partner distributors in INDIA for Oriental Motor Co., Ltd-Japan make, Motion Control Systems, we offer you a broad range of fully integrated product level with all AC Motors & Geared Motors, Variable Speed Control Systems, Stepper Motors & Driver Systems, Brushless DC (BLDC) Motors, Actuators, Cooling Fans, Centrifugal Blowers, Gear Units and Couplings with a full lifecycle perspective for the entire drive technology.

• Material: Plastic
• Color: Black, Pink
• Condition: New
• Application: Personal fan
• Feature: Light Weight, Stable Performance
• Type: Mini Cooling Fan
• Weight: 200gm
• Blade Thickness: 0.5-1mm
• Country of Origin: India

portable rechargable fan with adjustable angle  mist sprayers  fan 1.5 inch  battery capacity 800mh with neck dangler easy to carry and use. personal fan with hummidifier low cost personal fan with hummidifier battery personal fan with hummidifier for home personal fan with hummidifier jharkhand

Making use of industrial expertise gained over many years, we keep coming up with products meeting the exact needs of the customers. As a Manufacturer, Supplier and Exporter, we offer yet another quality product in the form of Axial Fans. These are known for their corrosion resistance, precise design and robustness. Our product is available in a range of designs and sizes. Lay your hands on it at reasonable rates.   Additional Information : We offer axial fans. An axial fan is a type of a compressor that increases the pressure of the air flowing through it. The blades of the axial flow fans force air to move parallel to the shaft about which the blades rotate. In other words, the flow is axially in and axially out, linearly, hence their name. The design priorities in an axial fan revolve around the design of the propeller that creates the pressure difference and hence the suction force that retains the flow across the fan. The main components that need to be studied in the designing of the propeller include the number of blades and the design of each blade. An axial fan consists of much fewer blades i.e., two to six, as compared to ducted fans. Axial fans operate at high specific speed i.e., high flow rate and low head and hence adding more blades will restrict the high flow rate required for its operation. Due to fewer blades, they are unable to impose their geometry on the flow, making the rotor geometry and the inlet and outlet velocity triangles meaningless. Also, the blades are made very long with varying blade sections along the radius.

• Type: fanuc
• Voltage: 24V - DC
• Color: Black
• Power Source: Electric
• Material: Plastic
• Model Name/Number: 1606KL-05W-B59 NMB-MAT COOLING FAN

• Voltage: 220 V
• Material: Plastic
• Power: 220 W
• Color: Black
• Power Source: Electric, Solar
•  :  

We manufacture entire range of axial flow fans at an reasonable price with good quality.

An axial flow fan is a mechanical device that produces a flow of air or gas. These are used to move air and gasses through ventilation systems. Serving a variety of industrial needs, fans force air through steam boilers and lowering the operating temperature of electronics and machinery. In contrast to the compressors, fans operate at relatively low pressure. These are classified as centrifugal or axial. Centrifugal fans are the traditional forms that are used mainly for ventilation, such as ceiling-mounted fans. The air is moving perpendicular to the impeller shaft. There are three general types of centrifugal blades, namely: radial, curved forward and backward curved. These produce more pressure for a given air volume and is used for hair dryers, inflatable objects, and other similar industrial purposes. On the other axial flow fans are used for small fans for electronic gadgets, large fans used wind tunnel and various other applications. However, you familiar with this, because they are typically used for an ordinary table fan. The blades of this type of force air to move parallel to the axis of rotation. These fan blades may be planar or curved plates or are formed with cross-sections related to airfoils that provide lift wing of an aircraft. There are three categories, namely, the propeller, pipe, and vane. The propeller is used for large volumes of air pushing against a low or no static pressure. Meanwhile, baths are those of which the propellers are encapsulated in a channel section. On the other hand, vane converts circular, rotating air movement in the longitudinal direction, vertical movement. Vane is considered to be the most efficient fans for HVAC systems. Most average fans of this type have a flow rate of approximately 75 m3 / hr (meters cubed per hour), which accounts for most small bathrooms with a short run of the duct through the wall, no more than one meter. There are some that up to 97m3 / h and pull can be guided to 5m, but axial fans work best in shorter channel run. The design axial fans cannot handle long runs product if they do not have the necessary pressure to press a large distance the air and reach a stall condition where the air stops moving in the channel. Finally, when choosing industrial exhaust fans, most companies will purchase an axial flow fan, but some will prefer the wall fans also known as the panel like fans.

• Fan Size: 1.5 inch
• Brand Name: fan
• Usage/Application: cooling fan
• Fan Type: Portable
• Fan Size: 40mm
• Voltage: 24
• Power Source: Battery
• Capacity: Any
• Model Name/Number: 24V - DC COOLING FAN - 40MM

• Color: Black
• Voltage: 12 Volt DC
• Type: Voltage Regulator
• Brand Name: Pengda Technology
• Usage: 3D Printer Parts
• Product Code: 3D Printer Small Cooling Fan 12V

A fan is a device that is designed to move a specific volume of air (flow) against moderate pressure (resistance). A fan induces an airflow by virtue of its blades; a blade moves air by generating a lift force when in motion through the air. An axial flow fan is a fan in which the flow of air is substantially parallel to the axis of rotation.The three main kinds of axial fans are-• Propeller fans - These fans are used to move large quantities of air against very low static pressures. They are usually used for general ventilation or dilution ventilation and are good in developing up to 0.5 in. wg • Tube-axial fans - Tube-axial fans are similar to propeller fans except they are mounted in a tube or cylinder. Therefore, they are more efficient than propeller fans and can develop up to 3 to 4 in. wg). They are best suited for moving air containing substances such as condensable fumes or pigments.• Vane-axial fans - Vane-axial fans are similar to tube-axial fans except air-straightening vanes are installed on the suction or discharge side of the rotor. They are easily adapted to multistage and can develop static pressures as high as 14 to 16 in. wg. They are normally used for clean air only.   Low vibrations as per VDI 2056. Aerodynamic Performance tested as per BS 848 Part-1 (1980) Sound Performance tested as per BS 848 Part-2 1985.

With our expertise in the axial fan blades design Perfect use the most efficient aerodynamic profile for the blades designed. Perfect’s aerodynamic hub is the best solution for the reduction of air turbulences near the neck of the cooling tower fan blade. Excellent corrosion resistance is provided for performance that remains same even after long time of operation.

We are leading manufacturer and supplier of radiator cooling fan.

The axial fan moves the air axially. The axial fan impellers made of sheet metal and are welded on to the external rotor motor directly, making it a compact axial fan unit.

• Brand Name: NMB TECHNOLOGIES
• Supply Voltage: 24V
• Current Type: DC
• Fan Frame Size: 60mm
• External Depth: 25mm
• Noise Rating: 36dBA
• Flow Rate - Imperial: 25cu.ft/min
• Flow Rate - Metric: 0.71m³/min
• Bearing Type: Ball
• Power Connection Type: 2 Lead Wires
• Current Rating: 130mA
• Product Range: 2410ML Series