BAL ENDURA ADHESIVES (INDIA) PVT. LTD. Peenya, Bangalore, Karnataka

Our waterproofing solutions are highly application specific. From sub-structure to roofing, ARDEX have a range of rapid curing, energy efficient membranes to stand the test of time – and moisture. Non failure in these areas, even under extreme conditions, is critical which is why so many professionals rely on us.

To provide an easily cleaned surface, with excellent adhesion to concrete and cement sand screeds. Particularly suitable for floor applications in garages,warehouses, light industry and other areas subject to light vehicle and pedestrian traffic.

Two component system, high polymer modified adhesive High performance flexible adhesive Suitable for wood & metal surface High tensile strength

A highly effective cleaner designed for everyday maintenance of tiles, marbles & natural stones etc. Ideally suitable as a general purpose cleaner. It is very much safe and less reactive (compared to other cleaners based on Hydrochloric acid) especially on marble surfaces. Designed specially for removal of limescale & for everyday maintenance of tiles, marbles, natural stones, etc. Ideal for regular maintenance of heavily trafficked areas such as shopping malls, hotels, etc.

A highly effective cleaner designed for everyday maintenance of tiles, marbles & natural stones etc. Ideally suitable as a general purpose cleaner. It is very much safe and less reactive (compared to other cleaners based on Hydrochloric acid) especially on marble surfaces. Designed specially for removal of limescale & for everyday maintenance of tiles, marbles, natural stones, etc. Ideal for regular maintenance of heavily trafficked areas such as shopping malls, hotels, etc.Daily maintenance General purpose cleaner Effective against lime scales Mild enough to use on stones porous tiles Areas of Application

Grey, polymer modified, cement-based tile adhesive, suitable for fixing tiles & natural stones in interior situations. For exterior applications and more difficult and demanding situations eg: vitrified tiles, glass mosaics, external cladding, swimming pools, etc. consult ARDEX ENDURA regarding use of a higher performance adhesive.

WPM 3000 X (Shelterseal 3000 X Self Adhesive Membrane) is a “peel and stick” bituminous asphalt membrane protected by a cross laminated high-density polyethylene film. WPM 3000 X is made from two structural components. Bitumenasphalt compound modified with SBS and high tack resins. This special compound has been formulated to make the product easy to install. The membrane can be adjusted should it initially be placed in the wrong position, as the adhesive on the sheet achieves final adhesion only after a few minutes.

Non staining – Granite, marble, sandstone – Metal frame, perimeter sealing – Various joint sealing of PC and RC – Aluminum Expansion joints in heavy and light prefabrication and traditional masonry Sealing joints for facade panels, curtain walls, boarding, exterior wood finishing Joints between frame and preframe, between door frame and masonry Adheres on a majority of building supports: concrete, glass, anodized aluminium, wood

A high quality fine, polymer-modified, water - resistant, cement - based powder grout designed for grouting glazed wall tiles, mosaics, vitrified & fully vitrified tiles, floor tiles, industrial floor tiles, etc (where chemical resistance, hygienic and sterile is important use ARDEX ENDURA EPOXY GROUT).

Provides a hard, and good abrasion resistant surface Non metallic - does not rust or stain Good monolithic bond with base concrete Easy to apply and economical FH 20 is a blended powder which is ready to use on site. It contain special abrasion and wear resistance aggregates. These latter considerations, together with the use of high performance workability admixtures, produces a material which is easy to trowel onto the surface of fresh, wet concrete. FH 20 cure monolithically to provide a dense, non-porous surface which is extremely hardwearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin 'granolithic' screeds, viz., shrinkage, cracking, etc., are completely overcome. FH 20 provide a slip floor resistant surface which will never rust and disintegrate.

Medium Duty Non Metallic Floor Hardener Provides a hard, and good abrasion resistant surface, Good monolithic bond with base concrete,Easy to apply and economical.

WA G has luminous powder from rare earth, which can absorb ultraviolet, lamp light, sunlight and other visible lights in only 15 minutes, then giving out light up to 2 hours. Glow in the dark feature is characterized by their ability to absorb store the energy of naturalartificial lights and to emit it in the form of visible light in the dark. WA G is a three part system comprising of PART A, PART B, and PART C for ease of application and the ability to fill tilestone joints the grout is best mixed to a smooth, creamy consistency. The cured grout does not permit the entry of bacteria or dirt and is easily maintained in a sterile condition.

SU 10 is a single component, elastomer polyurethane sealant for expansion joints.Expansion joints in heavy and light prefabrication and traditional masonry, Sealing joints for facade panels, curtain walls, boarding, exterior wood finishing, Joints between frame and preframe, between door frame and masonry,Adheres on a majority of building supports: concrete, glass, anodized aluminium, wood.

Non-crack Easy mixing and application Strong adhesion Interior & exteriorA 802 is a specially formulated plaster to provide a new and modern interior and exterior application. A 802 is easy to work, without any additional aggregates. Not only smooth surface but also provides non- crack and thermal insulating plaster. Suitable for thin and thick mortar (1.5 - 3mm) application. It is crack, dump, permeability and excellent weather resistant. It has strong adhesion with a proper flexibility, able to compensate the temperature difference stress between substrate and the outer coatings.

R 3 E is a two part solvent free epoxy primer for use with ARDEX ENDURA polyurethane screeds and self-smoothing epoxy floor coatings. Blind with Fine Aggregate and use as a primer prior to applying thick applications of the ARDEX ENDURA K 80 Industrial Floor System, or other appropriate ARDEX ENDURA cement-based products.Where surfaces are very porous, more than one coat of primer may be required to achieve the desired bonding efficiency.

Feature : Two component solvent free epoxy primer

industrial epoxy flooringFloors usually experiences - impact, abrasion, chemical attack, and thermal shock. Concrete floors on its own, are not designed to take this continual abuse though they are considerably form a strong matrix. Cement being the main component of concrete floors, creates dust from wear and abuse. Cement concrete floors are also susceptible to abrasion and chemical attack. These are the very reason why concrete needs appropriate protection regardless of where it's located. The problem, in any given scenario, is to establish an appropriate recommendation of the protective system to suite different areas of application, different situations, different substrate conditions, different industries…. Keeping all these points, ARDEX ENDURA has developed a wide range of floor coating systems

A high quality fine, polymer-modified, water - resistant, cement - based powder grout designed for grouting glazed wall tiles, mosaics, vitrified & fully vitrified tiles, floor tiles, industrial floor tiles, etc (where chemical resistance, hygienic and sterile is important use ARDEX ENDURA EPOXY GROUT).Polymer modified grout Good compressive strength Available in range of colours

EPOXY GROUT is a three-part system, comprising of PART A, PART B and PART C. For ease of application and the ability to fill tile stone joints the grout is best mixed to a smooth, creamy consistency.EPOXY GROUT is Hygienic, hard-wearing, impervious, epoxide resin-based grout with a high degree of resistance to chemical attack, abrasion and impact. The cured grout does not transfer taints to foodstuffs, does not permit the entry of bacteria or dirt and is easily maintained in a sterile condition.

Size : 5 kg & 1kg

epoxy floor toppingA specialist applied, self-smoothing epoxy polyurethane resin floor finish combining outstanding wearing properties with chemical resistance and decorative properties. Ideally suited in areas where a seamless, joint free finish is required and maximum cleanliness is essential. Laboratories, clean rooms, and general light industry are just some of the environments that can benefit from this system.

In recent past years, the protection of concrete floors has been a essential component especially in Industrial buildings. The main purpose, of course, is to provide protection to the slab from deterioration or contamination, and also not to overlook, to provide some added benefit such as, wear and tear, antiskid, chemical resistance, easy maintenance, physical performance, aesthetics etc. It is quite obvious that no other surface in a building takes more abuse than floors, regardless of the type of building, be it industrial or commercial or public. Floors usually experiences - impact, abrasion, chemical attack, and thermal shock. Concrete floors on its own, are not designed to take this continual abuse though they are considerably form a strong matrix. Cement being the main component of concrete floors, creates dust from wear and abuse. Cement concrete floors are also susceptible to abrasion and chemical attack. These are the very reason why concrete needs appropriate protection regardless of where it's located. The problem, in any given scenario, is to establish an appropriate recommendation of the protective system to suite different areas of application, different situations, different substrate conditions, different industries…. Keeping all these points, ARDEX ENDURA has developed a wide range of floor coating systems

A specialist applied, self-levelling, epoxy resin floor finish combining outstanding wearing properties with chemical resistance and decorative properties. Ideally suited in areas where a seamless, joint free finish is required and maximum cleanliness is essential. Clean rooms, and general light industry are just some of the environments that can benefit from this system.

Size : 16.68kg

concrete sealerJoint sealants are used to seal joints and openings (gaps) between two or more substrates, and are a critical component for building design and construction. The main purpose of sealants is to prevent air, water, and other environmental elements from entering or exiting a structure while permitting limited movement of the substrates. While sealants may seem like a small detail item on your building, they can contribute to the development of large problems if they fail and allow moisture to get into the walls. ARDEX ENDURA offers excellent solutions for all these requirements

Effective cleaner for CP fittings & sanitary wares Removes hard scaling which develops due to hardness of water Removes stubbon water stain marks & limescale with ease Based on surfactant to protect your chrome plated taps

A 3 Screed Concentrate A 37 Screed Cement A 38 4-hour Screed Cement A 45 Rapid Drying And Hardening Internal Repair Mortar A 46 Rapid Setting and Hardening External Repair Mortar CL 11 Commercial Levelling Compound FH 20 Medium Duty Non Metallic Floor Hardener Feather finish Rapid Drying patching and Smoothing Compound K 15 Rapid Drying Self-Levelling Sub-Floor Smoothing Compound K 80 Rapid Drying Industrial Topping Wearing Surface K 301 Fast Setting Resurfacing and Levelling Compound