Borewell Submersible Motor Pumps Dealers in Bangalore

• Head: upto 249 metres
• Borewell dia: 100 mm / 150 mm
• Capacity: up to 72 m3 /hr
• Power rating: 0.37 kW to 15 kW

Champion series Borewell Submersible Pump are designed for use in bore wells. Pumps are of centrifugal, multistage, high-speed design and hence are light-weight and compact. It has a Radial flow/Mixed flow impeller design and has low power consumption per stage. Pumps are widely used in Agriculture, Irrigation, Booster Application, Water Supply Schemes, Industries and Construction Sites. APPLICATIONS Agriculture Irrigation – Conventional and Sprinkler Booster application Water Supply schemes Industries SALIENT FEATURES Light Weight and compact. Multistage High speed. Radial flow / Mixed flow. Low power consumption per stage. Can be installed Horizontally also.

• Type: Borewell
• Number Of Stages: Multi Stage Pump
• Motor Horsepower: 1.0 hp / 10.0 hp
• Head: 301 to 500 m
• Power Source: AC Powered
• Maximum Discharge Flow: Less than 100 LPM

SAER Submersible Pumps are renowned for their high efficiency and reliability throughout the range. Made entirely of corrosion-resistant stainless steel, SAER submersible pumps are ideal for a wide variety of applications.   Radial Submersible Electric Pumps Operation Condition   Operation Condition Max Head  : 955 M (3133 ft.) Max Capacity : 210m3/ Hr Pumps size : 4” 6” 8” 10” Temp of Pumped Liquid  : 0oC to 40oC RPM  : 2900 Maximum immersion depth : 200 m under liquid level Max pressure : 22 bar Grain size of  silt : 200gm/m3   Pumps Construction Impellers : Polycarbonate loaded with fiber glass. Diffusers :  Noryl (techno polymer) loaded with fiber glass. Shaft : AISI431 stainless steel (on request, AISI316), with grooved profile. Outlet and suction support : Brass or coated carbon steel (on request stainless steel AISI304) External shell : Stainless steel AISI304.   Other Materials Available on offer : Carbon Steel, Brass, SS-316, SS-304, Noryl, Cast Iron   Features  Complete unit of pump with electric motor oil bath range CL95  Hydraulic part to be connected with 4” submersible motors with coupling following NEMA MG1-18.388 The FS 98 series uses axial sliding floating impellers, which avoid the jam up of the pump even with the presence of sand. Outlet complete with non-return ball valve. Driving bushings in anti-wear rubber. Components realized with particular materials which assure a high wear resistance. This pump is an ideal solution in pumping water with suspended sand particles up to 300 g/m3.   Application Suitable for lifting, pressurising and distribution in Civil and industrial installations  Autoclave and cistern inlets Washing plants  Irrigation systems Draws from wells of min. diameter of 104 mm, tanks or natural basins.   Installation Vertical / horizontal (depending on power). Special Versions Range XFS98 with inlet and outlet in stainless steel AISI304 precision castings.   Semi-axial Submersible Electric Pumps   Operation Condition Max Head : 388M (1273ft) Max Capacity  : 725m3/hr Pump Size   :  6”, 8”, 10”, 12”, 14” Temp of Pumped Liquid : 0oC to 35oC Frequency : 50 Hz Rpm :  2900 Maximum immersion depth : 300 m under liquid level Max pressure : 45 bar Grain size silt  :  300gm/m3 Pumps Construction Impellers  : Cast iron EN-GJL-250 (brass for model K and X) or FeG450 steel. Diffusers :  Cast iron EN-GJL-250 or FeG450 steel. Shaft : AISI431 stainless steel, with grooved profile. Outlet : Cast iron EN-GJL-250 or FeG450 steel. Suction support : Cast iron EN-GJL-250 or FeG450 steel.  Materials Available : Carbon Steel, Brass, SS-316, Duplex Steel, Cast Iron   Features Complete unit of pump with electric motor. SP hydraulic part to be connected with 4” submersible motors with coupling following NEMA MG1-18.388 or 6” submersible motors with coupling following NEMA MG1-18.401- 18.413 Semi axial impellers. Outlet complete with non-return valve. Pump equipped with counter trust ring in anti-wear resin. Diffuser complete with wear ring in anti-wear rubber. Driving bushings in anti-wear rubber with metallic shell. Components realized with particular materials which assure a high wear resistance.   Installation  - Vertical.Special Versions XS and XVS Series entirely made of stainless steel SB series made of marine bronze (up to max 25 bar) Different tensions Version for horizontal installation. Application Suitable for lifting, pressurizing and distribution in Civil and industrial installations,  Autoclave and cistern inlets, Washing plants,  Irrigation systems.  Draws from wells of min. diameter of 158 mm, tanks or natural basins.

We are offering borewell submersible pumps. Features stainless steel motor, housing for longer life high quality imported carbon thrust bearing to work at lower voltages stainless steel shaft with coupling high quality noryl impellers, diffuser and pump casing applications high discharge with low power consumption houses, flats, hospitals, hostels and marriage halls industrial applications agricultural

• Number Of Stages: 30 stg
• Motor Horse Power: 3.0 HP
• Brand Name: Texmo Aqua
• Application: Borewell
• Motor Phase: Single Phase
• Maximum Discharge Flow: 1001- 5000 LPM
• Model Name/Number: Texmo Aqua 
• Head Total depth: 700 ft

• Type: Borewell Submersible Pumps
• Application: Industrial
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years
• Color: MUlticolor

• Features: Sturdy construction, Accurate dimensions, Longer service life .

• Type: Borewell
• Number Of Stages: Multi Stage Pump
• Motor Horsepower: 5 - 20 HP
• Brand: Falcon

• Discharge casing: Engineering polymer: NORYL

80100 mm (3"4") V-6 V-8 V-10 submersible pumpsets are manufactured as per latest technology and most modern design. Rewindable, water cooled, water lubricated motors using winding wires of international quality. Total dependable bearing of international quality. Motors suitable for single phase 0.5 hp to 2 hp (0.37 kw to 1.5 kw) and 3 phase 0.5 hp to 5 hp (0.37 kw to 3.7 kw). Motors are suitable for wide voltage fluctuations. Suitable for total heads upto 160 mtrs (525 ft) and discharge upto 180 lpm. Corrosion and abrasion resistant high grade engineering polymers, stainless steel and special alloy pump components.

• Head: upto 249 metres
• Borewell dia: 100 mm / 150 mm
• Capacity: up to 72 m3 /hr
• Power rating: 0.37 kW to 15 kW

champion series borewell submersible pump are designed for use in bore wells. Pumps are of centrifugal, multistage, high-speed design and hence are light-weight and compact. It has a radial flow/mixed flow impeller design and has low power consumption per stage. Pumps are widely used in agriculture, irrigation, booster application, water supply schemes, industries and construction sites. agriculture irrigation – conventional and sprinkler booster application water supply schemes industries construction light weight and compact. multistage high speed. radial flow / mixed flow. low power consumption per stage. can be installed horizontally also.

Submersible Borewell Pump, borewell pump set, Pressure Pump

Borewell Submersible Pumps, Submersible pumps, diesel pumpsets

Borewell Submersible Pumps, Air Compressor, Electric Motors, Portable Genset

Borewell Submersible Pump, Pumps, Submersible pumps, pump accessories