Car Battery Charger Dealers in Bangalore

Portable Compact S portable Compact Smps Based Battery Charger We offer high quality Portable Compact S Portable Compact SMPS Based Battery Chargers.   Additional Information : Item Code - MPA-04

Battery Chargers used in Wind Mill.

Positioned in the industry as a manufacturer, supplier, exporter and trader, we are engaged in offering smps battery chargers. Available with suitable voltage and current ratings, these chargers are available in different models and specifications. To develop these chargers, we make use of transformer, diodes, capacitors and inductors, which are sourced from authentic vendors of the industry. Features: longer life span high performance precisely design details: wide input voltage tolerance high efficiency overload, short circuit & reverse polarity protection very low load & line regulation output power up to 480w rugged, reliable and tropicalised design work with natural convection cooling(no forced air cooling required) the operating temp. Is -5°c to +55°c input and output terminations and led indications specifications: input voltage range 90v to 270v, 160v to 270v ac 50 hz nominal output voltage 12v,24v,30v,110v dc rated output current 1.2a,2a,4a,5a,8a,10a,15a and 20a output voltage regulation 0.5v switching frequency 130khz efficiency >80% ripplenoise peak-peak 250 mv without battery connected at the output min load condition no min load requirement for voltage regulation or operation of the float charger inputoutput connector pcb mounted terminal block storage temp -20°c to +55°c operating temp -5°c to +55°c humidity 95% rh led indications ac mains present : red led output voltage present : green led protections fuse at the input (slow blow) isolation of 2kv between input & output protection against output short circuit protection against transient surge at input through proper rated mov’s over temperature protected, with auto restart cooling natural convection

Specifications 12V, 24V, 36V, 48V, 72V batteries up to 250AH with six pulse or twelve pulse rectifier Intelligent Thermal Management Over voltage, Under voltage and Over current protection switching mode control (SMPS or transformer) based design . Protection against the reverse polarity of battery . Alphanumeric LCD display panel for user-friendly interface . Also available in customized forms for applications on request . Easy battery connection with clip leads

Salient Features:   Electronically Controlled Constant Current Charging. Specially Designed Filters For Low Ripple (Pure DC). Latest Digital Controls For Accuracy & Reliability. Isolated DC Output to Ensure Safety To Operators. Digital Metering For Accurate Monitoring. Rugged Design For Long Trouble Free Service. Optional Features: Automatic Termination Of Charge Through Ampere – Hour Controller/Timer. Temperature Compensated Charging With Built-in Discharger For Green Plate Charging. Logging Of Voltage, Current, Amp-Hrs, Temperature Etc. Green Plate charging is very effective and economical way of charging plates, where in the process of formation of plates is omitted. The pasted plates after curing (Green Plates) are assembled in to batteries and are straight away charged. This saves time, energy and money by skipping the plate formation process altogether. This requires to be charged on special temperature compensated chargers to provide slow and steady charge over an extended period of time to ensure that the electrolyte temperature does not exceed safe limits. Battery chargers with multiple outputs of say 3, 6 & 12 channels can be provided, each having independent control and monitoring of charging current & Voltage. Each channel can be designed for charging 10, 20 or more No. of batteries connected in series at desired current. Chargers with built in Dischargers are also supplied with micro controller / Computer controlled programmers with data acquisition.

We are a prominent name, which is engaged in delivering a superior range of Emergency Mobile Chargers. We ensure that defect free Emergency Mobile Chargers are delivered at customers' premises within the assigned time. Our Emergency Mobile Chargers are acclaimed for features like highly portable design, charges phones very quickly, easy to operate, carry characteristics etc.

• Warranty: 1 year
• Features: Quality approved, Rigid design, Reliable, Equipped with in-built AUTO cut-off feature, Indicator light on the panel, Compact design
• Rating: 12V, 3A
• Input: 220VAC

• Color: Black
• MOQ: 1
• Product Name: Battery Charger 12VDC10A

Battery Chargger 12VDC10 A = 1650 + GST 24VDC10A = 2850 + GST Hooter 230VAC = 425 + GST + Freight etc

We Offer Smps Batter Charger with Constant Current Constant Voltage ( Cccv ) Charging Mode to Ensure that Within the Voltage Range, the Battery is Charged At a Constant Rate. with the Inhert Advantage of Bringing Charging Mode in to Trickle Curretn Mode, Bc, Restricts the Voltage from Reaching Any Undesired Stage. Smps (cccv) Has a Provision to Cut Off the Boost Current. During Charging It Ensures that the Battery is Fed a Constant Boost Charging Current Until the Battery Voltage Reaches Its Full Charged Condition. Thereafter the Float Current is Maintained. this Float Current Flowing for the Longest Period During the Charging Process is Reduced to Nearly Zero Ultimately Results in Enhanced Battery Life, Keeping It Fully Charged Always. The Unique Charge Evaluation Circuit Monitors the State of Charge of Battery and Automaticaly Cut Off the Charging When the Battery is 100% Charged Which Results in No Over Charge or Under Charge But An Extended Battery Life. Custom built to any Voltage / Current. Available in Din Rail mounting and in 19” rack mounting.

• Power: 1-3kw
• Application: Charging
• Voltage: 220V
• Driven: Electric

Compatible Devices: Mobile phones, Headphones, Tablets, Cameras, Speakers, Smartwatches Connectivity : USB Special Feature: QC 3.0 PD 3.0 PPS Multiprotocol Connector Type: USB Type A and Type C USB Port supports: QC 3.0, AFC, FCP, VOOC, DASH Protocols Type C Port supports: PD 3.0, PPS, QC 3.0, AFC, FCP Total USB Ports: 2 Output DC: 22.5W Input AC: 100-240V  

• Driven Type: Electric
• Color: Black
• Application: Charging
• Type: Universal Charger
• Warranty: 2years
• Country of Origin: India

• Capacity: 2500mAH
• Color: White
• Power Source: AC Adapter
• Part Number: PS 346

A battery is a collection of multiple electrochemical cells, but in popular usage battery often refers to a single cell. The usage of "battery" to describe electrical devices that converts chemical energy directly to electrical energy . Special Features Cold forged terminal inserts Microporous PVC glassmatPolythelelene envelope separator Batteries with tubular positive plates Pasted type negative plates with PVC guards Heat sealed covers Extra electrolyte above the plates PolypropyleneHard rubber container Ceramic vent plugs Low maintenance Best after sales & service

• Unique Feature:: 1.Smart with programmable output 2.Good look and feel. 3.Current limited & is constant with temperature 4.With p + tested Linear regulation 5.With Ripple Rejection 6.Output is short-circuit protected 7.Reverse polarity protection 8.Overload protect
• Specification:: Auxiliary Supply: 230v AC ± 10% 50-60 Hz

This is an intelligent charger which monitors the battery�s voltage and time under charge to determine the optimum charge current at that given instant of time . Output current depends upon the battery�s state and Charging is terminated when the battery voltage is equal to the fixed reference voltage of the charger. Pulse Width Modulation (PWM) is the most effective means to achieve constant voltage Battery charging for any system.

Range:15 amps to 500 amps, DC voltage to suit battery bank, Input supply :Single phase & three phase, Topology:Float, Boost, Float cum Boost Float and Boost, Redundant. Efficiency better than 80% at nominal input and output from 50% to 100% load, High reliability and minimum downtime due to usage of ribbon cable connectors, Built-in status indication LEDs for diagnosis and automatic electronic trip and pulse inhibition, Ripple is less than 3% of RMS of full load current.

This model is equipped with a high visibility colour TFT display with a graphic interface for ease of use. The service management procedure is fully automatic, so there is no requirement for manual taps. The distinctive features are the hermetically sealed bottle system, automatic service management system, refrigerant measurement and scale locking system. The 760R can be purchased configured either for the old R134a refrigerant or the new R1234yf refrigerant. A retrofit kit is also available to change refrigerant type.

• Warranty: 6 Months
• Color: Black
• Material: ABS Plastic
• Length: 6 cm

• Brand Name: U-Power Tech
• Type: Battery
• Application: Work Shops, Industries
• Charge Current: Multiple
• Battery Type Charged: Lead Acid Batteries / Car Batteries / Tubular Batteries
• Product Type: Battery Accesories

Its 16 bit digital controller continuously track the PV panel Voltage and the Battery Voltage for charging the battery.It automatically works in boost cum float mode ensuring full charging of the battery.