CNC Turning Center Dealers in Bangalore

We are offering Simple Turn machines are designed to bridge the gap between manual and CNC Turning Lathes. These Flatbed Lathes are built on a double walled bed with a robust headstock. They are equipped with electronic hand wheel which imparts flexibility and ease of handling to cut intricate parts without any additional effort or attachments.Please contact Ace Designers for more details.

Chuck Size Dia 135, 8 Station Turret. X Axis - 110, Z Axis - 200. Tail Stock- Optional.

• Brand Name: Brisk Tech
• Certification: IEC
• Warranty: 12 Months
• Place of Origin: Karnataka, India
• Dimension(L*W*H): 1500*1550*1780
• Model Number: Polygon-2A

we are manufacturs of cnc polgon turning machine

From mass to retail requirement fulfillment, we can do it all. Our organization has a widespread trading system to offer our patrons with the goods all year round and make scheduled delivery. Staffed with dexterous team members, they make complete quality analysis of the product before send off.

We designed and manufactured a Twin Station, 8 Axes, CNC Controlled, Stock Turning SPM for a large scale component manufacturing industry in Bangalore. This SPM is designed to take the load off 8 high end turnin Problems faced by the customer: The cast job of the customer has a stock removal of around 8 mm in the bore and face. The customer cannot reduce the stock during casting stage, as the job profile is such that any reduction in stock at one point would eat up into the finished area at another point, leaving no option, but to retain huge, machining stock on all the walls of the components. On a CNC turning center, the cycle time required is 10 minutes for rough turning of 7 mm stock and the rest 1 mm would be finish-turned in a cycle time of 2 minutes. Total cycle time is about 12 minutes. It is noted that the turning centers is not suitable for heavy cuts beyond 3 mm which was leading to the increase in the cycle time. Customer approached us to manufacture a CNC turning SPM, which could cut 7-8 mm in one single go. g centers.   Features & Specs: A twin station concept – one station to bore and face the front end of the job, the other to bore and face the rear end of the job. Each station has 2 sets of compound slides with servo driven cross and longitudinal axes. One set of compound slide does facing while the other will be used to bore. Both the facing and boring slides will work simultaneously to reduce the cycle time. Slides made of male, heavy duty, extra rigid, case hardened guideway strips and female turcite lining. Many innovative design features for reducing the cost, without diluting the stock removal capabilities within the specified time. Sequence of operation: Manually load cast job onto left hand chuck & on the auto-cycle button. Job gets clamped automatically & head stock starts rotating Machining of the face & ID of the front end of the job takes place. While machining on LH station is going on, operator loads an ID machined job on RH station. On the auto-cycle button & rear side machining of the job takes place in the RH station. Cycle Time: Every 75 seconds, one rough turned component is achieved. Conclusion: The customer is now getting a rough turned component at the rate of 1 piece/75 seconds, compared to the earlier 1 piece/10 minutes. i.e. a cycle time reduction of 87.5% A comparatively less accurate, highly affordable, Stock Turning CNC SPM is expected to result in elimination of 8 high end, accurate, expensive CNC turning centers, which are hitherto used for rough turning operations. Reduction in man power – 8 CNC operators along with 8 turning centers are now available for more gainful work. Increased output. After rough turning in our machine, finish turning is carried out on CNC tuning centers, thereby cutting down the whole cycle time from 1 piece/12 minutes to 1 piece/3.25 minutes. i.e. a cycle time reduction of around 73%.  

Table diameter :- 1800 to 5050mm,Max work piece diameter :- 2200 – 5500mm,Max work piece height :- 1300 – 3500mm,Max table load :- 15000 – 100000kg,Main motor output:- 58 – 81 kW,Cross rail travel :- 1500 – 3000mm,Ram travel :- 1000 – 2000mm,cross rail cross-section :- 200×200 – 360x360mm,Rapid traverse :- 0 – 8000 mmmin

We are dealing in high quality of slant bed cnc lathe (CNC Turning Center PRECITURN) Modular turning center for total turning solutions. Salient Features : » Compact high-tech product optimally customised to requirements. » Built on modular concept with lot of add-on features and focus on quality. » Integral 450 cast iron base with vibration dampening properties designed for maximum rigidity and stability. » Facilitates turning, boring, facing, threading, rigid tapping, profiling and several other operations. » Optional C-axis with driven toolsservo turret, integral spindle and 2 ?m spindle runout. » 12-Station electromechanical turret in lieu of standard 8-station. » Preloaded linear motion guideways. » Preloaded both end supported ballscrews for enhanced rigidity while cutting. » Higher rapid rates - reduced cycle times, reduced cost per piece.

• Turning Length: 500mm

• Country of Origin: Made in India
• Phase: Single Phase
• Voltage: 415 V
• Rated Power: 10 HP
• Material: Stainless Steel
• Automation Grade: Semi Automatic
• Corrosion Resistance: Yes

Model Units LT-16-300-LM Capacity Swing Over Bed mm 450 Swing over carriage mm 225 Maximum Turning Dia mm 320 Maximum Turning Length mm 300 Distance between centres mm 296 Spindle Spindle Size Nose A2-5 Max.Bar Capacity mm 25* Bore through Spindle mm 52.5

We offer cnc 4-axis flash turning machine for piston rods. This machine built with 8 station turret head and sliding spindle head accommodates piston rod of length up to 1400 mm

CNC Turning Centers, Vertical Turning Lathe, Vertical Machining Center

Our pick and automation systems will eliminate the need to feed raw materials to the cnc machine and take out the finished item manually. Our manipulating system will feed the raw materials to your cnc turning centers and take out the finished parts and keep in a collection basket. All this is done automatically and there is no need of any operator for this work. Operator is required only to check the items machined so that any change in dimension can be corrected. This way you can use one operatorno skilled worker to run 4-5 machines at a time thus reducing your cost and also run the machines 24 hours.

Mini CNC Lathe, Vertical Turning Lathes, Mini Lathe Machine

• High precision: from dia 25mm to 100mm

We are offering cnc turning machine, cnc machine tools, turret, boring holder, tool holder, tailstock center.

We are offering cnc turning machine.

CNC Turning Centers, CNC Milling Machines, Conventional Lathes Machines

CNC Turning Center

CNC Vertical Lathe Machine, Insitu Slot Milling Machine, SPM Machine

CNC Turning Machine, Precision Machine Components, Jigs and Fixtures

CNC Turning, Precision Machine Components, Grinding, Dies, Jigs

CNC Turning, Injection Moulding Dies, Blow Moulding

CNC Turning Machine, 2d Height Master, Bore Gauges, Height Gauge

CNC Turning Center, VMC Machining Center, DRO Milling Machine

Heavy Duty CNC Turning Machines, Conventional Lathe Machines

CNC Turning, Air Crafts, Hydraulic Fitting, Precision Components

CNC Turning Machine, Milling Machines

CNC Turning Machine, Precision Component

CNC Turning Centre, Split Collets, CNC Components, CNC Machine Part

CNC Turning Centre, CNC Turret Punch Press, CNC Machines