Commercial Air Conditioner Dealers in Kamakshipalya, Bangalore

In modern manufacturing technology, where various metal processing operations are affected by heat produced due to high spindle speed, high cutting depth. The heat generated affects tool life, quality of job work as well as coolant used in process. To overcome such critical situations dai chi offers suitable coolant chillers.

BATS offer Air Handling Unit in both options Single skin Construction and Double skin construction. Single skin constructed AHUs are to be used in Fresh air Ventilation System.  Single skin constructed AHUs are built by using heavier gauge sheets (18 / 20 SWG Galvanized sheet). Double skin AHUs are constructed by using PUF insulated panels. The panel outer skin may be with 20/22 SWG GI sheet and the panel inner skin may be with 24 SWG GI sheet. PUF slabs will be used as core insulation of AHU panels. The thickness of panel may be 25 / 40 / 50 mm. Thickness of panel will be decided with application and size of the AHU. The main frame work shall be with imported, extruded aluminum profiles. All sections are provided with hinge type access doors with handle & locking systems for easy access for maintenance.       The blower section will have DIDW blower with backward / forward curve impeller mounted on a common base frame with drive motor. The blower may be direct drive / v-belt drive arrangement. Anti vibration mounting below the common base frame and outlet canvass connection at blower outlet will be provided to isolate the vibration of blower.       AHUs will have other suitable selected internals based on the application in combination of the following: Air intake louver (Fresh air / once through System) Return air mixing box (Recycling system) Strip Heaters bank Pre filter bank (10 micron) Cooling coil / Cooling pad Fine filter bank (5 micron) Super fine / HEPA filter bank (0.3 micron) Generally, Air Handling Units are classified as floor mounting and ceiling mounting based on the mounting arrangement. Available to suit to the application and to suit to the designed flow rate and static pressure as custom built. The cooling coil will be designed either Direct expansion / chilled water duty conditions based on the requirement.   Based on your requirement, we can include instrumentations for monitoring and control the system performance and safety point of view like magnehelic gauges to measure pressure difference across the filters, limit switches on inspection door of AHU etc.

We specialize in providing Panel Air Conditioner to the clients. Panel Air Conditioner cools and maintains specific desired temperature inside the control Panel. Panel Air Conditioner with various cooling capacities is provided by us. Appreciated for excellent performance and high durability, our Panel Air Conditioner is high on demand in the market. Apart from Panel Air Conditioner, we also offer Industrial Panel Air Conditioner and Panel Coolers. Working Once the panel is fully closed with sealed doors, the dust particles are prevented from entering the Panel as Panel is with positive air pressure. The cooling technique used in Panel Air Conditioner removes the moisture trapped inside panel, which gets condensed and the water drained out through an outlet provided in our air conditioning unit. Attributes High efficiencyDurable performanceLow power consumingCompact

CHILLERS are generally used to cool & maintain the temperature of coolant / oil / water or other media. Temperatures can be set either with respect to ambient or at a fixed value. These chillers work using the principle of refrigeration. Good quality components are used to ensure reliability & long life of Chillers.   APPLICATIONS: WATER CHILLERS : These are used :        1)  to cool x-ray / laser heads, heating coils of induction hardening machine etc.                                 2)  on sub zero applications like testing performance of components at below zero degree centigrade etc. OIL / COOLANT CHILLERS : These are used to cool Hydraulic oil, coolant oil or emulsion coolant. Maintaining a constant hydraulic oil temperature at allowable limits helps to stabilise the performance of hydraulic powerpacks. Controlled coolant temperature increases the tool & coolant life, gives better & consistent accuracy of machining or grinding operations and thus improves process & machine capability values. WE MANUFACTURE DIFFERENT TYPES OF CHILLING UNITS SUCH AS : A1- STAND-ALONE TYPE CHILLER :   These Chillers have their own pump and a Stainless Steel ( SS ) or Mild Steel ( MS ) tank where the hot / warm medium is cooled and pumped back to the machine / equipment  for continuous circulation. A2- DIP IN TYPE CHILLERS : Here the evaporator / cooling coil of the chiller is directly dipped into the tank containing the medium to be cooled & the top of the chiller rests above the tank. The heat from the medium is removed by the dipped coils. A3- CHILLERS WITH HEAT EXCHANGER : These Chillers have their own heat exchanger, either Plate Type / Compact Brazed type or Shell & Tube type in SS or MS having evaporator / cooling coils, which reduces the temperature of the medium. This unit can also be given with a pump for continuous circulation to the machine / equipment. B1- CHILLERS WITH DIFFERENTIAL TEMPERATURE CONTROLLER: These chillers control the medium temperature within + or - 10 deg C with respect to ambient temperature. B2- CHILLERS WITH FIXED POINT TEMPERATURE CONTROLLER: These chillers control the medium temperature with respect to a pre set value of temperature. B3- CHILLERS WITH HEATING & COOLING : These chillers control the medium temperature very quickly at a constant value within a close tolerance band of temperature. Any combination of the above types, A & B, can be made to meet very specific requirements.  

• Type: Display Cooler
• Body Material: Metal
• Door Type: Single Door

We have been working very closely with machine tool manufacturers in order to provide an effective solution for cooling contaminated and non-contaminated coolants. Today we have a solution for all types of coolants that require cooling. Many times the coolant carries much and is reactive to materials like copper. We have an effective, maintainable and reliable solution for all these common problems encountered while cooling the coolants. There are standard models of chillers to choose from for pure or contaminated or reactive coolants. Wide range of cooling capacities is available for these applications. Applications • Coolant Tanks                                                                                 • CNC Machines• Machine Tools                                                                                 • Components Quenching

Air Filters in Air-conditioning or HVAC plays a crucial role in the overall performance of the entire system. Right balance has to be achieved get clean air, right pressure and air flows. We use the right filter material which not only confirm to the earlier filter standard of EN779:2012 but also the latest filter standard of ISO 16890.

We are offering reed diffuser.

1. High turndown ratio of 40:1 for control valve.2. All wetted parts are stainless steel with nitrated for longer life.3. No need of i/p convertor, positioner and separate controller .all the functions are built into the system.4. No choking problrm in the roboter as they are bellows operated.5. Wide range of set pressure available.6. Valve can be mounted in any position compare to self acting valve which requires mounting only in the horizontal pipelines.7. For emergnecy handwheel is provided so that valve can be adjusted manually and plant can run without distrubance.8. Availability of the system is very high which will reduce the frequent shuit -downs and production losses.9. Air consumption is very minimal 300 nl/hr.10. No need of maintaining the costly spares as the system is highly reliable and we can provide the services from bangalore office under emergency.

Devduct prefabricated Air ducts are manufactured with very high quality material which is procured from very reliable vendors of the markets. These prefabricated ducts include smooth profile elbows so that the air flow within the duct is not disturbed. We customize these as per the client's specification and we offered these prefabricated ducts at very cost effective prices Devduct manufactures complete range of HVAC, commercial and Industrial ducting system as per the customer's approved drawings in various sizes & profiles for various Air Cooling, Ventilation, commerical and industrial applications. We use very high quality raw materials, fittings and components in the ducting process to assure sturdy ness and durability and to ensure long lasting service. These are chemical resistance to broad spectrum of corrosive fumes, gases and fluids. The ducting systems manufactured and supplied by us are easy to handle and install. Our products are manufactured with updated technology and good quality of raw materials to ensure the durability & good performance for Industrial, Hotels and Domestic requirements.. Our ducting meets the norm of international standards.

A water chiller is a mechanical device used to facilitate heat exchange from water to a refrigerant in a closed loop system.The range of Water Chillers we manufacture and supply are mainly used to remove from the liquid either via vapor-compression or absorption refrigeration cycle. These Water Chillers are also used in air conditioners to distribute chilled water to heat exchangers or coils.Our range of Water Chillers is widely used in industries like chemical processing, food and beverage processing, metal working cutting coils and many more. These Water Chillers we manufacture in various specifications to meet the requirement of customers. we manufacture water chillers and all water chillers come with complete, packaged, closed-loop systems, including the chiller unit, condenser, and pump station with recirculating pump, expansion valve, no-flow shutdown, internal cold water control. Our products are widely appreciated all across for their excellent features like quality, efficient working, low maintenance and durability. Water chiller is also widely used in plastic industry, electrons, plating, chemical industry, ultrasonic wave cooling, printing and others. we manufacture water chillers which can precisely control the temperature requested by the modernized machinery production, and it greatly improved the production efficiency and quality.The liquid is drawn from the tank, pumped through the chiller and back to the tank. We also manufacture and offer our customers Water Chillers with PLC and microprocessor based control. We follow latest engineering techniques in the manufacturing process to match the modern trend in equipment. All Chillers are manufactured in accordance with ARI conditions.The range of Water Chillers we manufacture are suitable for applications ranging from 5 ℃ to 25 ℃. These products come unified with an insulated SS 304 316 water reservoir, electrical control panel and re-circulating pump.

The SNAP-CAP “PLUS 5” represents a substantial advancement in the art of diffuser design. The major improvement in the snap-n check diaphragm cap which is now manufactured from a new, specially compounded. Space-age EPDM based thermoplastic rubber that provides extended life and improved performance. Our tubes are designed for maximal strength at minimum positive buoyancy. Although tubes are usually not as efficient as discs, tube diffusers are often the most economical choice of all diffusers, particularly the 63mm diameter x 1m because of their relatively large size and high air capacity compared to disc diffusers. They require fewer header pipes, less support stands and less installation time than disc diffusers. The tube membranes are extruded from low extractable oil content EPDM polyurethane, Silicon or Nitrate.  

• Phase: Three Phase
• Tank Capacity: 2 Ton - 300
• Temperature Range: -8 to +15 Degree Celcius
• Brand: Hitachi

McQuay packaged chiller plants provide energy efficient chillers integrated with pumps, controls, electrical switchgear, wiring, and piping. All of these packaged components are factory assembled on a rugged structural steel base for indoor or outdoor mounting and connection to site power and piping. Packaged chiller plants are a value-added solution to the high costs of constructing mechanical rooms in both new construction and renovation projects. Typical applications include:lower construction costs, shortened construction cycle, quicker building occupancy, additional chiller capacity without enlarging the existing mechanical room, cost-effective solution to replacing existing chillers, portability of the packaged chiller plant, • flexible ownership options.

SPM for Soap Industry AUTOMATIC GLYCERINE SOAP CHILLER Introduction: This machine is designed for producing of Glycerine Soap Bars. The process involves hot liquid of Glycerine Solution which is poured into Storage Tank conveys into 100 Nos Oval Pipes by Hydraulic suction system.The Oval Pipes are arranged with Chill water circulation to solidify the solution at fast pace and the 100 Nos of 700 mm long Glycerine Soap Bars is formed within 1 Hour process time. he machine consists of Chill Water Tank with SS Oval Pipe Inserts and Bar Ejection Rods which is operated by Hydraulic Mechanism. Upon moulding process, the soap bars are ejected using hydraulic system which is operated by flame proof electrical switches. The machine is of sturdy construction and the materials used for manufacturing conforms to International Standards. The equipment design consists of Hydraulic Cylinder, Hydraulic Power Pack, SS Oval Pipes, MS-SS Chill Water Tank, Inlet and Outlet Water Connections. The machine is user friendly and designed for high accuracy, cleanliness for easy and hassle free operation.     Technical Specifications: Production Capacity : 100 Bars x 700mm long per 1 hr Tank Storage Capacity : 100 Bars Chill Water Plant : Capacity 10 TR Tank Material Used : Top & Bottom Plate – SS and Side Plates, Pipelines – MS Main Structure; 8” High Channel Hydraulic Cylinder Specification: 150 dia x 700 mm Stroke Length Hydraulic Cylinder Hydraulic Power Pack : With 10 Hp Flame Proof Motor with 200 Ltrs Hydraulic Tank Operating Panel : Equipped with Flame Proof Electricals Power Required : 10 HP Machine Dimension: 2300mm x 3000mm x 4000mm Pipeline Connections to Chill Water Plant Hydraulic Oil – 200 Ltrs Customized design as per individual needs can also be implemented.

Customers can avail a wide range of Bus Duct from us, which are highly accredited in various sectors and industries for their variegated applications. We manufacture these offered products using qualitative raw material like aluminium bending and steel plants that are sourced from the most trusted clients of the industry. Further, these ducts can be availed in various sizes and capacities as per the needs of the patrons.Features: Robust construction Excellent workability Low power consumption Longer service life

air conditioning plants, Panel Cooler, Oil Chiller, moisture seperator

Bus Ducts, Electrical Panels, Cable Trays

air door, Double Skin Air Handling Unit, Refrigeration Coils

Hvac Components, CCTV Cameras, Hard Disk Drive, home automation product