Commercial Air Conditioner Dealers in Prashanth Nagar, Bangalore

Electrical Panels in the industrial equipments like CNC machines, thermal Power Plants super computers etc., Dissipate heat during operation, if the working temperature of the electronic components goes beyond the tolerable limits, the components present inside the control panel could malfunction & deteriorate earlier than predicted, our panel air conditioners are designed to maintain 27 C. We have various modes and capacities to suit specific requirement. These air conditioners perform only on completely sealed / air tight cabinets.   Application : Industrial Computer Panels CNC Control Panels MCC / Distribution / Telecom Panels Programmable Controllers Motor Control Centers

• Shape: Rectangular
• Country of Origin: Made in India
• Power Source: Electric
• Usage/Application: Industrial
• Capacity: 4000CFM
• Operating Temperature: 60 Degree C
• Heat Resistance: Yes

• Speciality: Easy To Use
• Usage: Industrial
• Material: Stainless Steel
• Shape: Round
• Color: Sliver
• Finishing: Polished
• Automatic Grade: Automatic

Over three decades of being part of the process cooling industry, Werner Finley has designed and built cooling systems and components that avoid excess energy consumption, thus cutting down operating expenses for the buyers who use our products. A normal chiller would operate based on the fluctuations of media temperature- turning on when its temperature crosses the set point and turning off when it drops below the set point. Due to this, chillers tend to undergo a large number of on-off cycles during the manufacturing process, even when not needed at times. In order to avoid excess cycles and save energy, Werner Finley has created energy-efficient chillers adopting technologies which assess the amount of heat in the machine at regular, pre-set intervals, thus reducing the number of on-off cycles drastically. It is possible to save up to 30% of the energy normally consumed by replacing conventional chillers with energy efficient variants. An energy-efficient cooler is composed of a highly sensitive compressor of either VFD or digital scroll technology, an electronic expansion valve, a fan speed controller and a chiller controller. It requires these control units in order to fine-tune the process and ensure that energy is consumed sustainably. VFD-based compressors function at varying capacities from 30-110%, controlled by parameters like fluid temperatures or refrigerant pressures. Werner Finley makes use of Copeland Digital Scroll™ compressors which provide capacity modulation from 10-100% of full load capacity. A chiller that uses digital scrolls is seen to save 30-32% in power consumption compared to normal scroll, and so is a better investment when applications call for variable load conditions. They also provide greater temperature stability, showing deviations of only +/- 0.5°C. Electronic expansion valves are installed within these chillers to maintain a desired superheat regardless of changing conditions and to control the refrigerant anywhere within the system. Fan speed controllers regulate temperature and refrigerating systems, thereby minimizing power wastage. Werner Finley’s Energy Efficient Chillers find applications in medical, data centre, induction welding, food processing and lamination industries.

With an integrated i550 motec frequency inverter, the highly efficient IE2 m550-H three-phase AC motors cover the power range from 0.25 ... 0.55 kW. With an integrated i550 motec frequency inverter, the premium-efficient IE3 m550-P three-phase AC motors cover the power range from 0.75 ... 5.5 kW. Highlights Energy efficiency classes for economical and future-proof use in many applications and countries Scalable modular system for optimum adjustment to machine requirements Easy connection via terminal box or conventional plug-in connectors for fast commissioning Speed control via the integrated frequency inverter enables universal use Optimized for use as geared motors with g500 gearboxes

• Warranty: 1year
• Material: Stainless Steel
• Voltage: 380v
• Weight: 1200Kg
• Type: Screw Chiller
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Features: Safe in Use , Shear Strength, Low Maintenance
• Application: Industrial
• Quality: Best

• Size: 30 to 100 mm
• Color: white and half white
• Panel Material: GI and SS

We make sure that there will be no damage to the products that we deliver to the customers. For this, we use high quality packaging material and hi-tech machines ensuring the same. We are immensely accredited for delivering the orders within the stipulated time frame as we have the latest transportation facilities.

• Material: Aluminium, Brass, Copper, Iron, Metal, Stainless Steel
• Thickness: 0-5mm, 10-15mm, 5-10mm
• Certification: ISI Certified, ISO 9001:2008 Certified
• Application: AC Installation
• Color: Black, Golden, Grey, Grey-Golden, Metallic, Shiny Silver, Silver
• Surface Finishing: Polished, Power Coated
• Feature: Accuracy Durable, Auto Reverse, Corrosion Resistance, Dimensional, Hardend & Temper, High Quality, High Tensile
• Technics: Black Oxide, Hot Dip Galvanized, White Zinc Plated, Yellow Zinc Plated

A water chiller is an industrial water refrigeration system that produces cold waterto cool industrial process equipment. a water chiller is a complete systemfilled with refrigeration components including a compressor, condenser,evaporator, refrigerant pipes, coolant expansion reservoir, pumps and so on.Water is cooled to temperatures ranging anywhere between 6 deg. C to 25deg. Cand pumped via a hydraulic circuit to re-circulate through the processequipment.Watercooled sophisticated equipment has special needs beyond mere cool water.Sensitive equipment requires year round operation, precise temperatureregulated water flow and lean circulating loop features, all of which are onlyavailable with equipment matched factory tested dedicated chillers.Forselecting a reliable process coolingsystems for your process equipment, look for packaged chiller which isfactory tested, piped, charged and wired. This will ease your effort and saveyour time in installing and operating the chiller. Use of a dedicated chilleris more efficient. Cooling requirements can be met during low outsidetemperatures without the expense of operating large facility chillers.WernerFinley provides complete range of IndustrialWater Chillers that are dedicated, packages, cooling capacity matched,temperature and water flow matched, that operate year round for a variety ofwater cooled industrial and medical equipment.Theadvantages of Werner Finley dedicated chillers include: Precise temperature control under continuous regulated supply of cooling fluid   Factory tested , piped, wired and charged for hassle free start-up and operation   Local services and parts for quick and knowledgeable maintenance and service WernerFinley's broad product line gives us the unique ability to create a 'tailoredsolution systems to process ' each time that will meet your needs precisely andefficiently.We are experts in manufacturingand supplying water chillers, chillers and water coolers of a broad variety of models and capacities. Thewater chillers come integrated with an insulated SS water reservoir,re-circulating pump and electrical control panel. We also offer water chillerswith and microprocessor based control. These water chillers and chilling plantsare designed aesthetically, and are installed by using a spanner andscrewdriver.APPLICATIONS OFWATER CHILLERSFrom precise analytical equipment to machinery on theshop floor, from sensitive medical diagnostic systems to process equipment,they all have unique needs fro fluid cooling . No matter what the applicationis, Werner Finley has the expertise and technology to meet your dedicated chillerneeds. IndustrialApplications: Induction hardening, heating, welding   EDM: wire cut, spark erosion   X-ray diffraction and florescence spectrometer   Fluid cooling for machine tools   Component quenching   Plastic injection molding and extrusion   Pressure die casting   Hydraulic oil cooling   Condenser cooling   Metal working and plating   Water jacket cooling   Plasma spray   Liquid nitrogen plant   Vacuum systems and evaporators   Electro-chemical de-burring machine   Industrial washing machines   Laboratory applications Medical Applications: MRI   CT   PET   Linear Accelerators   CGR and RDS cyclotron   GAs Chromatograph   Cryogenic compressors   Other sensitive medical systems FEATURES OF WATER CHILLERSWerner Finley chillers are designed to coolcritical industrial process equipment and sensitive medical equipment, meetingor exceeding all manufacturers’ specifications. Werner Finley chillers arespecifically matched to the application to provide proper temperature and flowrate for a variety of critical applications. These dedicated chillers aretested at the factory to ensure proper operation and are supported by factorytrained experts with immediate access to common spare parts. In addition, thechiller is easy to install requiring only proper piping and power supplyconnections fro proper operation.Operational features include: Year round operation. allows your equipment to run continuously with controlled desired temperature and flow rate   Range of capacities, temperatures and flow rates   Meets the varied needs of coolingcapacities from 0.5 TR to 40 TR   Operational water temperaturerange of 6 deg. C to 25 deg. C   Operational flow rate rangingfrom 5 LPM/ TR to 20 LPM/TR Non ferrous circulating loop for cleanliness: Delivers a clean supply of water that will not disrupt sensitive equipment.   Precision Temperature control: Large volume of storage water ensues high thermal stability during the resting period of the compressor and also lessens compressor cycling.   Factory packaged and testing systems: Wired, Charged and piped. Tested for operation and cooling performance before installation. Optional Features: Micro processor based chiller controller   Rs 232/485 communication fro inter locking chiller controller with main machine controller   Refrigerant gauges; For continuously monitoring and display of suction and discharge refrigerant pressures.   Reservoir heater: Helps maintain constant fluid reservoir temperature during winter months. Also allows user to set higher fluid temperature fro specific applications that require heating and cooling options.   Optional monitoring systems; Installations where chiller is remotely placed from the operator a display monitor with temperature, status and alarm signals can be provided and located in the view of the operator.   Circuit breaker heat exchanger: An additional plate type heat exchanger can be provided and pre connected to the chiller wherever a circuit breaker (secondary heat exchanger) is required.   An optional hot gas by pass, which balances varying heat loads and provides precise control in the chiller, can be provided. This new feature significantly reduces start up time fro chiller applications and offer better reaction to varying loads. The hot gas by pass will automatically adjust as the load changes. It minimize compressor cycling, which will help reduce temperature swings and lessen component wear in the compressor.   Filters; Online filters with specific micron levels can be assembled in the fluid line wherever additional filtration is required.   Optional fan speed controller allows operation of chiller at ambient below 5°C up to - 15°C Other accessories available: Low flow switch   Chiller inlet water temperatureindicator   Flow meter   Pressure relief Valve   Check valve   Non return Valve

Medical chillers air conditioners are designed to cool the sensitive electronic components in the control cabinets. These air conditioners are easy to install and require minimum maintenance. These cabinet coolers are suitable to use as server rack enclosures, in food and textile machinery, medical equipments, robotics and gas plants.

• Application: Industrial Usage
• features: Feasible rates, Durability,Reliability
• Mounting: Window Mount
• Door Size: Upto 4ft, 
• I Deal In: New and Second Hand
• Weight: light
• Air Velocity: >20-22 m/s
• Noise Level: <80 dB
• Phase: 3Phase

• Gray: Yellow

Essence feel proud to be promoting rehfuss germany make motors & control products in india region, rehfussis your expert partner for drive technology; from highly developed system solutions to specialized drive units and individual components in the output range . A high degree of manufacturing depth at all production sites guarantees you tailored drive solutions and short delivery times. Our products drive solutions and services ensure you maximum productivity, reliability and efficiency.

• Type: Dehumidifier Air Handling Unit
• Features: affordable prices, high quality.
• Usage/Application: Industrial

We are offering the ied series of standard ac motors range from 160kw to 1200kw in frame size 315 to 560 and are available in 2,4, 6 and 8 pole designs. These motors have a dual air circuit which help in developing higher power ratings and are suitable for a variety of industrial applications.

We are offering General Power Laser Chiller. The General power laser chillers manufactured using stainless steel for extended service life can be used in applications that use less power such as semiconductor end-pumped laser marking machine, Jewelry laser spot welding machine,low power CO2 laser cutting machine semiconductor side-pumped laser marking machine, low power CO2 laser cutting machine, laser wire stripping machine, laser scribing machine. With these chillers refrigeration system components implementing international standards of performance serving excellent quality and guaranteed lasting refrigeration effect these chillers are your ideal cost effective solution you can trust.

(Disc diffuser system) The diffusers have special features that improve the operation reliability and efficiency, such as the non-return valve available on all models and the sliding ring available on the latest version of ABS Nopon diffusers. High oxygen transfer efficiency combined with low pressure drops makes the ABS diffusers extremely effective. Technical Details  Range: PIK 300 Size range: 336 mm Air Flow range: 1.5-8 m3/hr Membrane surface area: 0-0.60 m2 Bubble dia.: 1-3 mm Material of construction: main body - polypropylene; wedge piece - polypropylene; membrane disc - EPDM/HDPE; flat seal - EPDM   Applications  Continuous aeration   Key Features  Classic ABS NOPON fine-bubble disc diffuser with an HDPE aeration plate Equipped with a non-return valve Diffuser materials are made of PVC and HDPE Has a double layer disc to achieve top oxygen transfer yield with very low back pressure Equipped with a non-return valve For stainless steel pipes thread attachment is also available

  Industrial Dehumidifiers are used in many industrial applications where it is used to control dew point and relative humidity. With years of industrial experience Hygro Tech Engineers are mastered in the manufacture and supply of Industrial Dehumidifiers. Each Industrial Dehumidifier at Hygro Tech is custom engineered to meet different operating conditions. Industrial Dehumidifiers are used in different industrial applications that help in corrosion prevention, Condensation protection, Moisture regain Prevention, Fungus prevention, Product Drying etc…

The IES Series of Standard AC Motors range from 0.12kw to 200kW in frame sizes 63 to 315 and are available in 2,4, 6 and 8 pole designs. IES Motors have IP55 protection, IC411 cooling, and IE2 Efficiency (where applicable). These motors are suitable for a variety of industrial, domestic, agricultural and other general purpose applications. They are characterized by streamlined design, efficient cooling and noiseless running and they confirm to all national and international standards.

• Weight: 1000-2000kg
• Voltage: 220V
• Condition: New
• Driven Type: Electric
• Cooling Capacity: 90kw
• Item Name: Industrial Water Chiller

chillers range from 2 ton to 20 ton non standard design on request ambient temp -2 to 45 deg operating temperature 5 to 35 deg fluid.

We are offering various sorts of quality filter paper rolls that are manufactured and developed by our highly experienced team as per market trends. These rolls are fabricated from quality raw materials and are considered highly suitable for the dynamic filtration for various commercial, residential, pharmaceutical and industrial applications. They have earned enough appreciation for their performance, effectiveness, reliability, easy maintenance and long service life. We always charge market leading prices and our products are customized as per customers’ designs and specifications

Our company stands as a distinguished Manufacturer and Supplier of Air Insulated Bus Ducts based in Bangalore, Karnataka. The Bus Ducts offered by us are fabricated using high quality components and under strict supervision of our qualified engineers. Our Bus Ducts are acclaimed for their flawless functioning and affordable pricing. We are capable of delivering Air Insulated Bus Ducts to all parts of India within a postulated time.

Coolant Filtration System   Being the most valued organization in Bangalore guided by experienced, dedicated and knowledgeable professionals, we provide an immense assortment Coolant Filtration Systems. The range finds application in automobile, machining, rolling, bearing and other industries. Coolant Filteration System is widely appreciated by our customers in Bangalore for their features such as high strength and high thermal capacity. We at ROTOSPIN PRECISION in Bangalore are equipped with state of the art manufacturing unit with latest designed tools to manufacture Coolant Filteration System. Moreover, our clients can avail the offered products in different specifications in relatively less time. We are the preeminent manufacturers and suppliers of Coolant Filteration System all over Bangalore.

• Frame: IS 2062 ,BQ 2002,Alloy Steel / SS
• Blade: IS 2062,BQ 2002,Alloy Steel / SS

Simplex – fitted to the periphery of the blade is a series of flexible metallic looped and leaf-spring sealing elements. These seals are constructed of austenitic stainless steel or high nickel alloys, depending on the operating conditions. They are designed to seal against both continuous landing bars in the duct framework of the isolator and to provide a sealing margin of at least 30 mm. The metallic seals alone, give a sealing efficiency of 99.95% or better, on cross-sectional area. Duplex – 100% tightness, required to ensure complete safety for maintenance personnel working in an isolated section, is attained by creating, with a small fan, an air barrier in the inter space between the two sealing surfaces. The pressure zone, set at approximately 50 mm. H2o above the expected duct pressure, does not pump them up. This sealing arrangement has the additional advantage that it provides an automatic venting arrangement if there is a sudden pressure surge. Thus if the first sealing surface pushed off, the second, nearest the isolated section, is pressed even tighter against its landing surface and the gases are vented to atmosphere through the fan.

• Shape: Round
• Color: Silver
• Thickness: 1mm
• Material: GI
• Usage/Application: Industrial

  Type : Standard / Interleaved Enclosure : IP 54 / I55 for Outdoor Construction : CRCA / Aluminum Body SC level : 50KA for 1sec Busbar Supports : FRP/ SMC in Ribbed construction Interval of Support: 400mm Max. Conductor : Aluminum E91E Grade of Fasteners : 8.8Grade Type of Joints : Cu. Flexible braided at Transformer end& Al. Flexible strips joints at Panels end. Design : As per customer plant requirement.

We are offering round air diffuser to our clients. We are fabricating this air diffuser from quality material using latest technology at our our manufacturing unit. These axial diffusers are highly appreciated by our clients and are available market leading prices. features: easy to carry best grade materials corrosion resistance specifications: material: aluminium size: 100 mm, 125 mm, 150 mm, 160 mm, 200 mm.

contact :    palani velan  .

Made from eco friendly re-cycled polyester fibre has diffusion capacity up to .6 nrc.