Commercial Air Conditioner Dealers in Vijay Nagar, Bangalore

• Material: Galvanised Steel Powder Coated
• Color: Black
• Model: RBW-135
• Capacity Net: 196 Ltrs
• External Dimension: 1350 (W) x 545 (D) x 900 (H) in MM
• No of Shelves: 6
• Lights: Interior LED lamp
• Power Supply: 230V AC / 50Hz
• Set Temperature: + 1.5°C
• Off-cycle defrost (RBW series): -2 to + 12°C
• No. of Door: 3

For low temperature applications where the operating temperature may go below 4°C, Brine solution is used as heat transpiring media. For such applications DAI CHI offers brine chillers to suite the applications.

• Country of Origin: India
• Material: Water Chiller
• Brand: Venus Atmodphere

Packaged Water Chiller

Clean room is an enclosed clean work space employing control over the particulate matter in the air with temperature, humidity and pressure control. All clean rooms must not exceed a particulate count as specified in the air. We are all aware that the times are changing in Indian industries in all sectors have to gear up to meet the new challenges of changing time. The manufacturing practices of the past are no longer considered good enough. The quality standards are being revised constantly to meet Indoor Air Quality (IAQ)               The laminar air flow principle was introduced in clean room technology. This was considered to be the biggest revolution in clean room design engineering to maintain IAQ.       GENERAL REQUIREMENTS   Clean rooms to be built and operate in an area where particle generation levels are minimum. Environmental control Clean room air pressure Air changes rate of air flow Temperature range Humidity range Noise level Vibration levels Microbial Contamination Other factors like lighting, internal equipment load, occupancy, electromagnetic radiation, radioactive particles, gases, vapors.   CLEAN ROOM DESIGN REQUIREMENTS   Area to be defined to built clean room space. Entry ways Ante rooms, change rooms Air handling system with filtration Air-conditioning equipment Clean room furniture’s, equipments Clean room lighting and fire protection Desired level of cleanliness.

Oil Chillers that are used to reduce the fast heat which is produced during the machine’s functioning. These Oil Chillers are mostly used in applications like cutting, lubrication, hydraulics,quenching, drilling, broaching, honing, grinding etc. As the oil needs to be maintained at an accurate temperature Oil Chillers are very necessary to retain the chemical and physical properties. These Chillers are designed with immense care and adopting latest techniques to ensure they fit specific application.

We bring forth Oil Chiller that is a modern machine tool provided with hydraulic power packs. Our professionals manufacture these Oil Chiller using high-grade condensers, evaporator, compressors and temperature controllers. When the temperature of the hydraulic oil in the power pack is kept under control, the operating efficiency and accuracy of Oil Chillers are excellent. The specially designed refrigeration type Oil Chillers offered by us are required in maintaining temperature in oil sumps. Works On 35oC to 40o Why Our Oil Chiller? High efficiencyReliable performanceLong lasting serviceLow maintenance

Hvac Components, CCTV Cameras, Hard Disk Drive, home automation product

• Power: 20W to 750 watts
• Voltage: 220V / 440V AC
• Features: Dual coated enamel copperwire, Superior grade silicon lamination, Motors can be offered in IP23, IP54 and IP44 enclosed, High quality bearnings used, Special shaft/double shaft extension can be given
• Speed: 2880, 1440 rpm

The SNAP-CAP “PLUS 5” represents a substantial advancement in the art of diffuser design. The major improvement in the snap-n check diaphragm cap which is now manufactured from a new, specially compounded. Space-age EPDM based thermoplastic rubber that provides extended life and improved performance. Our tubes are designed for maximal strength at minimum positive buoyancy. Although tubes are usually not as efficient as discs, tube diffusers are often the most economical choice of all diffusers, particularly the 63mm diameter x 1m because of their relatively large size and high air capacity compared to disc diffusers. They require fewer header pipes, less support stands and less installation time than disc diffusers. The tube membranes are extruded from low extractable oil content EPDM polyurethane, Silicon or Nitrate.  

CHILLERS are generally used to cool & maintain the temperature of coolant / oil / water or other media. Temperatures can be set either with respect to ambient or at a fixed value. These chillers work using the principle of refrigeration. Good quality components are used to ensure reliability & long life of Chillers.   APPLICATIONS: WATER CHILLERS : These are used :        1)  to cool x-ray / laser heads, heating coils of induction hardening machine etc.                                 2)  on sub zero applications like testing performance of components at below zero degree centigrade etc. OIL / COOLANT CHILLERS : These are used to cool Hydraulic oil, coolant oil or emulsion coolant. Maintaining a constant hydraulic oil temperature at allowable limits helps to stabilise the performance of hydraulic powerpacks. Controlled coolant temperature increases the tool & coolant life, gives better & consistent accuracy of machining or grinding operations and thus improves process & machine capability values. WE MANUFACTURE DIFFERENT TYPES OF CHILLING UNITS SUCH AS : A1- STAND-ALONE TYPE CHILLER :   These Chillers have their own pump and a Stainless Steel ( SS ) or Mild Steel ( MS ) tank where the hot / warm medium is cooled and pumped back to the machine / equipment  for continuous circulation. A2- DIP IN TYPE CHILLERS : Here the evaporator / cooling coil of the chiller is directly dipped into the tank containing the medium to be cooled & the top of the chiller rests above the tank. The heat from the medium is removed by the dipped coils. A3- CHILLERS WITH HEAT EXCHANGER : These Chillers have their own heat exchanger, either Plate Type / Compact Brazed type or Shell & Tube type in SS or MS having evaporator / cooling coils, which reduces the temperature of the medium. This unit can also be given with a pump for continuous circulation to the machine / equipment. B1- CHILLERS WITH DIFFERENTIAL TEMPERATURE CONTROLLER: These chillers control the medium temperature within + or - 10 deg C with respect to ambient temperature. B2- CHILLERS WITH FIXED POINT TEMPERATURE CONTROLLER: These chillers control the medium temperature with respect to a pre set value of temperature. B3- CHILLERS WITH HEATING & COOLING : These chillers control the medium temperature very quickly at a constant value within a close tolerance band of temperature. Any combination of the above types, A & B, can be made to meet very specific requirements.  

Filters down to 10-3micron Can be used for either coolant or straight cutting oil Best Material usedFilters down to 10-3micron Can be used for either coolant or straight cutting oil Best Material used

McQuay packaged chiller plants provide energy efficient chillers integrated with pumps, controls, electrical switchgear, wiring, and piping. All of these packaged components are factory assembled on a rugged structural steel base for indoor or outdoor mounting and connection to site power and piping. Packaged chiller plants are a value-added solution to the high costs of constructing mechanical rooms in both new construction and renovation projects. Typical applications include:lower construction costs, shortened construction cycle, quicker building occupancy, additional chiller capacity without enlarging the existing mechanical room, cost-effective solution to replacing existing chillers, portability of the packaged chiller plant, • flexible ownership options.

refrigeration oils, Automotive grease, Maxi Cool OIL, Radi Cool OIL

Slip Ring AC Motor

Duct Connection Fan coil unit, Air Purifier

RP 2000 Pressure Relief Damper, FS1630 Combination Smoke Fire Damper

Refrigeration Oils are blended from Napthenic Base Stocks having Low Pour Point and have Excellent Fluidity at Very Low Temperature. These Oils resist Deposit Formation, have good Thermal and Oxidation Stability.These Oils meet BIS - 4578 - 1989 specifications.           Application           GRADE : 32, 46, 68, 100, 150     These Oils are recommended for use in Circulation Systems, Compressors, Machine Tools,  and Enclosed Gear Boxes which do not require EP Type Lubricants.      

AC Motor, Brake Liners, Electro Hydraulic Thruster OperatedRail Clamps

Portable Water Chiller, Air Blast Oil Cooler, Process Chiller

industrial process chilling plants, pharmaceuticals machinery