Conveyor Components Dealers in Tumkur Road, Bangalore (57 products available)

Factory robots SCARA are perfect for factories looking for maximum value without giving up performance. They are used for applications such as mechanical or electrical assembly, pick and place, kitting, dispensing and much more. SCARA's are the robot of choice when priceperformance is critical. SCARA arms come with a 400, 600, 700 mm arm length and Clean room models are available. With outstanding cycle times, industry leading ease of use and of course reliability, Scara's are the robots of industrial choice in India.

• Material: Mild Steel
• Brand Name: KES
• Material Handling Capacity: 5 Ton per Hour
• Belt Material: PVC
• Voltage: 220-240 V
• Warranty: 1 Year
• Automation Grade: Automatic
• Frequency: 50 HZ
• Power Source: Electric

We deal in Rubber Conveyor Belts of premium quality which are used frequently for various industrial purposes. These are made from hi-grade materials that resist adverse conditions and have durability and flexibility. Rubber Conveyor Belt are suitable for most of the industrial application purposes.

Magnetic Separators can very effectively separate Iron/Ferrous particles from any material within its range. MCI has supplied Magnetic Separators to several thermal power stations in India (NTPC, PSEB, TATA POWER etc). Many magnetic separators are supplied to chemical, food processing industries, ceramics, silica, quartz, glass chips and glass raw material industries. Sugar Plants, etc. There are various methods by which tramp iron particles can be separated from raw material. They can be either electromagnetic type or permanent magnetic type. The various types are listed below:

• Material: SS
• Length: 10m
• Automatic Grade: Semi-automatic
• Color: Silver
• Finishing: Polished
• Phase: Three Phase
• Voltage: 400V
• Speed: 4m/s
• Inclination: Horizontal
• Motor Power: 2HP

We are offering idlers rollers hi-life idlers - a technological innovation from the house of conveyors aircon idlers are vital parts in any belt conveying system, though it may appear to be of very insignificant. Being subjected to continuous loading & management the same to a great extent decides the overall performance of the system. When the technology was in the stage of infancy, idlers were nothing sort of pipes. By inserting bearings inside these pipes the rotation was made further smooth. Breakdown hours of the equipments corroding the profitability of the industries, there was a need of improvements in design and constructions of idlers. It was in this context aircon hi life idlers were introduced by us a decade ago. This evolution of high tech idlers from aircon has benefited many customers in considerably bringing down their operation maintenance cost of the system. The salient features of this new generation idlers are as below: * detachable with the bearing housing * improved bearing life due to the bearings not being exposed to dust as both the ends are sealed * reduced friction & saving in power * hi life idlers could be repaired by the users instead of being * replaced as in the case of conventional idlers

We provide a wide range of 2 Ton Electric Winch, which is manufactured using quality raw material and advanced technology, ensuring high efficiency and longer working life. Our range consists of control panel housed in steel metal enclosure, weather proof, which consists of isolator overload relay contactor giving consistent performance.

In the case of conveying of bulk materials which has material characteristics like free flowing by nature, which packs under pressure, which are very light and fluffy i.e., may be windswept and materials with very high temperature, in such cases belt feeders are not suitable ; only Screw Feeder are recommended. The Gravimetric Screw Feeder is custom engineered compact, enclosed and eco-friendly equipment that finds applications in continuous bulk proportioning of solids. This gravimetric feeder operated by a closed loop control system enables feeding at a controlled rate and exercises precise control over rate of flow. The system is capable of accepting external signals from other controllers or from the process computer, depending on the extent of plant instrumentation. These gravimetric feeders are in operation in cement, fertilizers and chemical industries. Each system consists of control panel, local panel, loadcell to measure the instantaneous load, tacho to sense the speed of the screw which is mounted inside closed trough. The screw shaft is driven by a constant speed AC motor coupled through a gear box.

We are offering screw feeder. Aircon provides a wide range of screw conveyors that are suitable for the tasks of elevating, distributing and retrieving a remarkably broad range of bulk material. Requiring minimal floor space, these screw conveyors are ideal for elevating highly abrasive material without causing any damage. features: •high tensile strength •durable performance •high functionality •corrosion and abrasion resistant

This series is universally applicable, e.g. it can be used as side guide roller. The material selected is a particularly impact-resistant polymer. The wheel features a double ball race made of steel, which ensures particularly quiet running. The wheel is especially light and offers a very soft startup.

In order to meet distinct requirements concerned with Belt Conveyors, we take pride in introducing you a comprehensive range of Conveyor Belts. These Industrial Belt Conveyors are available in various types depending upon customers’ choices and latest market demand. You can avail them at very affordable rates from our company.

In the case of conveying of bulk materials which has material characteristics like free flowing by nature, which packs under pressure, which are very light and fluffy i.e., may be windswept and materials with very high temperature, in such cases  belt feeders are not suitable ; only Screw Feeder are recommended. The Gravimetric Screw Feeder is custom engineered compact, enclosed and eco-friendly equipment that finds applications in continuous bulk proportioning of solids. This gravimetric feeder operated by a closed loop control system enables feeding at a controlled rate and exercises precise control over rate of flow. The system is capable of accepting external signals from other controllers or from the process computer, depending on the extent of plant instrumentation. These gravimetric feeders are in operation in cement, fertilizers and chemical industries. Each system consists of control panel, local panel, loadcell to measure the instantaneous load, tacho to sense the speed of the screw which is mounted inside closed trough. The screw shaft is driven by a constant speed AC motor coupled through a gear box.

• diameter: 915mm

The Wet Drum Magnetic Separator is a low intensity separator used in the recovery of magnetic susceptible material from non-magnetic susceptible material - primarily Magnetite and Ferrosilicon - in dense media applications. The unit is most effective in a Primary application with high throughput and recovery. Wet Drum Separators find use in a wide variety of applications like magnetic media recovery, purification of solids carried in liquid suspension and iron ore concentration. We offer two types of Magnetic Separators based on the nature of magnetic circuit.

Assembly or sub-assembly of automobile accessories, lamps caps, dry cells, electronic items, consumer durables, packed toffees, cartons, etc, Packing of pharmaceutical items in bottles or strips,Assembly of two wheelers in stages such as mopeds, scooters, cycles, etc and transfer of wooden cases, jigs, fixtures and heavy items

Twin Screw Feeding for Powdered Products including Flour, Minerals Chemicals, Milk Powder, Starch and Spices   Weighing Range 5-50Kgs 120-500 Bags/Hour +/-0.05-0.1% of the pack size   State of the art controller with LCD/ Touch Screen display & self-diagnostic features Records – Bag Count, Totalizer, Hours of Operation Easy to configure & troubleshoot Communication – RS232/485, Ethernet, SMS messaging of reports International Standards Certification  

Chevron belting is used to convey materials at angles that are so steep that load slips on such belts make increased angles of inclination possibCleat height range from 3 mm to 50 mm le compared with smooth surface belts.

• Material: PVC
• Belt Width: 50 & 100 mm
• Belt Thickness: 2 & 3 mm
• Tensile Strength: Customized
• Features: High flow rates, Compatible with a wide range, Longer life

Indus manufactures Electronic Gravimetric Weigh Feeders incorporating state-of-the –art technology for continuous bulk proportioning of solids.The material to be proportionally fed is passed over the belt; flow rate (also cumulative value) of the material is measured and compared with set parameters of the PLC/PID controller. The deviation is corrected by regulating the speed of the conveyor through variable speed A.C.Drive. (closed loop control system)Two high precision load cells are used to measure the belt load & a rotary encoder used to measure speed of the conveyor.Salient featuresPrecision machined rollers used to provide perfect belt run & high accuracyRubber coated pulleys prevents belt slippage.Gravity takes up to ensure constant belt tensionScrappers to prevent belt damage & tare changesEasy maintenance - belt change without aids from sideFully automatic Zero/Span calibrationHighly reliable PLC (with in built PID algorithm) & variable speed AC driveHigh precision load cells with damping to obtain best results.Empty Belt Correction Factor to achieve best AccuracySet Points Programmable from local panel or Main PanelOption FeaturesRs 485 Interface can generate printout with SQC AnalysisApplications Cement, Sponge Iron, Steel, Fertilizer, Chemical, Tobacco & Petrochemical Industries.

• Capacity: 100 kg/feet
• Length: 10 feet
• Brand Name: 3 Madhura
• Country of Origin: Made in India
• Material: MS
• Width: 3 feet
• Usage/Application: Commercial

Conveyor Motor

• Material: METAL,RUBBER & POLYAMIDE 
• Color: BLUE
• Brand Name: ROSTA
• Usage/Application: Industrial
• Dimension/Size: VARIOUS SIZES AVAILABLE

• Brand Name: Metsto
• Material: Stainless Steel
• Application: Industrial
• Capacity: 100-150 kg per feet
• Length: 10-20 Feet
• Finish: Paint, Powder Coated
• No of Legs: 4

We offer Conveyor Chains for smooth and stable flow of material depending on their performance. These chains are available form 1” pitch to 24” pitch having breaking load up to 100 tones in carbon steel, stainless steel, zinc plated, nylon rollers, etc. These chains are used in steel plants, cement plants, process industries, furnaces etc.We are leading manufacturers and suppliers of Conveyor Chains. Features: Quality tested Longer operational life Require less maintenance

The weigh feeders are used to proportionally/set value material to feed the manufacturing process. The microprocessor based weigh feeders are used manufacturing plant like steel, cement comical and sand processing plant.

We Supply & Manufacture Powered Roller Conveyor, Free Flow Roller Conveyor, Belt Conveyor, Cleated Belt Conveyor, Inclined Conveyor, Slat Conveyor, Transfer Chain Conveyor, Trolley Conveyor, Telescope Belt Conveyor, Ball Screw Conveyor etc.

FUSINg MACHINE BELT, Fusing machine, PTFE belt, Resin X Powder, Linix motor

Screw Feeders, High Speed Floating Surface Aerator, slow speed mixers

GENERAL DESCRIPTION AND SPECIFICATION OF  SCREW FEEDER  Screw Feeder will consist of a 100 mm to 225mm pitch plate steel helix mounted on a shaft and running in a m.s. fabricated trough. The main components of the feeder will be:       Trough which will be fabricated from 3 mm thick m.s. sheets. Both ends of the trough will be closed by 6 mm thick m.s. plate covers which will also have bearing blocks mounted on them. Dust seals will be   provided in the end covers. The trough with end covers will be mounted on a fabricated frame.     The top cover for the trough will also be fabricated from 3 mm thich m.s. sheet and fastened to the trough by means of bolts.     A helicoid flight screw which will be made up of a helix formed from flat steel strip and mounted on a m.s. shaft. The shaft will be partly tubular and partly solid. Solid shaft at both ends will be supported in  self sligning ball bearing plummer blocks of C.I. Construction.     Drive unit will consist of Geared Motor.

Drum Motors, Tapered Roller Bearings, zone controlled roller drives