Conveyor Feeder Dealers in Tumkur Road, Bangalore

Loss in-Weigh Feeders operate on the principle of controlled loss-in-weight. The proposed system comprises of a Weigh Hopper, Loadcells, Screw Conveyor with motor and associated control electronics. The Weigh Hopper and Screw Conveyor are mounted on 3 Nos. of Loadcells. The Loadcells are connected to a controller through a junction box. The material from the storage hopper is fed to the weigh hopper, which is controlled by a gate. A small screw feeder is mounted below this weigh hopper. The weigh hopper and screw feeder are mounted on high precision Loadcells and the output of the Loadcells are summed in a junction box and fed as an analog input to the controller. The controller calculates the rate, compares with the set rate and feeds the corresponding 4-20mA signal to the VVVF drive so as to control the speed of the motor of the screw, thereby controlling the rate of discharge.

We are offering screw feeder. Aircon provides a wide range of screw conveyors that are suitable for the tasks of elevating, distributing and retrieving a remarkably broad range of bulk material. Requiring minimal floor space, these screw conveyors are ideal for elevating highly abrasive material without causing any damage. features: •high tensile strength •durable performance •high functionality •corrosion and abrasion resistant

We are offering screw feeder.aircon provides a wide range of screw conveyors that are suitable for the tasks of elevating, distributing and retrieving a remarkably broad range of bulk material. Requiring minimal floor space, these screw conveyors are ideal for elevating highly abrasive material without causing any damage. features: * high tensile strength * durable performance * high functionality * corrosion and abrasion resistant

The weigh feeders are used to proportionally/set value material to feed the manufacturing process. The microprocessor based weigh feeders are used manufacturing plant like steel, cement comical and sand processing plant.

Twin Screw Feeding for Powdered Products including Flour, Minerals Chemicals, Milk Powder, Starch and Spices   Weighing Range 5-50Kgs 120-500 Bags/Hour +/-0.05-0.1% of the pack size   State of the art controller with LCD/ Touch Screen display & self-diagnostic features Records – Bag Count, Totalizer, Hours of Operation Easy to configure & troubleshoot Communication – RS232/485, Ethernet, SMS messaging of reports International Standards Certification  

In the case of conveying of bulk materials which has material characteristics like free flowing by nature, which packs under pressure, which are very light and fluffy i.e., may be windswept and materials with very high temperature, in such cases  belt feeders are not suitable ; only Screw Feeder are recommended. The Gravimetric Screw Feeder is custom engineered compact, enclosed and eco-friendly equipment that finds applications in continuous bulk proportioning of solids. This gravimetric feeder operated by a closed loop control system enables feeding at a controlled rate and exercises precise control over rate of flow. The system is capable of accepting external signals from other controllers or from the process computer, depending on the extent of plant instrumentation. These gravimetric feeders are in operation in cement, fertilizers and chemical industries. Each system consists of control panel, local panel, loadcell to measure the instantaneous load, tacho to sense the speed of the screw which is mounted inside closed trough. The screw shaft is driven by a constant speed AC motor coupled through a gear box.

Indus continuous loss in weight feeder provides unparallel versatility in handling wide range of feeding requirements. Feed rate from 50kgs to 1000 kgs per hour can be accomplished with high accuracies. Control of the feeder is through a highly reliable PLC based controller equipped with noise/Vibration elimination technology. Weight measurement is done through highly accurate/sensitive Loadcells. Various models of loss in weight Feeders are available based on the material Characteristics (Flow Properties).a. Twin screw loss in weight feeder.b. Single screw loss in weight feeder.c. Vibratory loss in weight feeder. 

In order to meet distinct requirements concerned with Belt Conveyors, we take pride in introducing you a comprehensive range of Conveyor Belts. These Industrial Belt Conveyors are available in various types depending upon customers’ choices and latest market demand. You can avail them at very affordable rates from our company.

High Speed Floating Surface Aerator, slow speed mixers

GENERAL DESCRIPTION AND SPECIFICATION OF  SCREW FEEDER  Screw Feeder will consist of a 100 mm to 225mm pitch plate steel helix mounted on a shaft and running in a m.s. fabricated trough. The main components of the feeder will be:       Trough which will be fabricated from 3 mm thick m.s. sheets. Both ends of the trough will be closed by 6 mm thick m.s. plate covers which will also have bearing blocks mounted on them. Dust seals will be   provided in the end covers. The trough with end covers will be mounted on a fabricated frame.     The top cover for the trough will also be fabricated from 3 mm thich m.s. sheet and fastened to the trough by means of bolts.     A helicoid flight screw which will be made up of a helix formed from flat steel strip and mounted on a m.s. shaft. The shaft will be partly tubular and partly solid. Solid shaft at both ends will be supported in  self sligning ball bearing plummer blocks of C.I. Construction.     Drive unit will consist of Geared Motor.

Weigh Belt Feeders, oil batching system, Batch Indicator

volumetric feeders, Quality Loss in Weight Feeder

Weigh Feeder, batching systems, Big Bag Filler, Valve Bag Filler

Loss In Weight Screw Feeder, Loss-In-Weight Feeder, Silver Brazing Service

SS Volumetric Feeders

Weigh Feeder, Erection Commissioning Services, Oil Dispensing Units