Current Sensors Dealers in Bangalore

• Country of Origin: India
• Type: Current Sensor
• Color: Black
• Condition: New
• Warranty: 5years
• Brand Name: ELECTROHMS
• Output: Voltage
• Product Name: Split core hall effect open loop sensors

Split core hall effect current sensor measure DC, AC and complex current wave forms with galvanic isolation. The advantages include low cost, small size, lightweight and low power consumption and are especially advantageous when measuring high currents. This sensor can be clamped on to the existing cable without interruption of the primary circuit.

SWA Order No : SWA-1099-A1-R0 Technical data 0-40A to 0-10V 24V power supply Microcontroller based. Can be programmed for any signals for 3 levels to operate 3 relays Signal is 0-10V

ADS DCCT-014 is a Hall Effect Based, Non-Contact, DC Current Sensor. The Vent dia is 20mm. It can measure 0-100A. The Output is 0-2VDC.  Features Non-Contact current measurement Hall-effect based sensor 1% FSD Accuracy

Current sensor, LEM current sensors are top-of-the-line affordable equipment that have a long list of features. Some of these critical features include: Precise Measurement: The current sensors can measure electrical amperage with precision as well as accuracy in the order of mill amperes easily. Low Thermal Drift: All the current sensors feature a low thermal drift that allows the sensor to be used for a prolonged period without any deviation in the accuracy of readings due to heat.

Current sensor for PCB mounting, the smallest and lightest in the industry Features * Smallest and lightest in the industry due to use of a high-precision magnetic element * High-precision detection achieved with low resistance and low heat generation * Highly resistant to disturbance, facilitating equipment design

current sensor, modem, Ultrasonic Sensor, Finger Print Reader

current sensor, ac controller

WCS2750 is a Hall Effect Base Linear Current Sensor Features: Low noise analog signal path 85 E internal conductor resistance Output voltage proportional to AC and DC current Min. sensing current 0~60A at 5V voltage supply High Sensitivity 32mV/A Wide operating voltage range 3.0~12 V. Low operating current 3mA Nearly zero magnetic hysteresis. Ratiometric output from supply voltage 23K Hz bandwidth

We are a well-known Manufacturer, Exporter & Supplier of AC Current Sensor. The Hall Effect is an ideal sensing technology. The Hall element is constructed from a thin sheet of conductive material with output connections perpendicular to the direction of current flow. When subjected to a magnetic field, it responds with an output voltage proportional to the magnetic field strength. The voltage output is very small (µV) and requires additional electronics to achieve useful voltage levels. When the Hall element is combined with the associated electronics, it forms a Hall Effect sensor. The heart of every MICRO SWITCH Hall effect device is the integrated circuit chip that contains the Hall element and the signal conditioning electronics. The XYZ consists of a precise, low-temperature drift linear hall Sensor IC with temperature compensation circuit and a current transformer with 0.24 Ohm typical internal conductor resistance. This extremely low resistance can effectively reduce power loss, operating temperature and increase the reliability greatly. Applied current flowing through this conduction path generates a magnetic field which I s sensed by the integrated Hall IC and converted into a proportional voltage. Working Principle : Theory of the Hall Effect : When a current-carrying conductor is placed into a magnetic field, a voltage will be generated perpendicular to both the current and the field. This principle is known as the Hall Effect. Figure 2-1 illustrates the basic principle of the Hall Effect. It shows a thin sheet of semiconducting material (Hall element) through which a current is passed. The output connections are Perpendicular to the direction of current. When no magnetic field is present (Figure 2-1), current distribution is uniform and no potential difference is seen across the output. When a perpendicular magnetic field is present, as shown in Figure 2-2, a Lorentz force is exerted on the current. This force disturbs the current distribution, resulting in a potential difference (voltage) across the output. This voltage is the Hall voltage (VH). The interaction of the magnetic field and the current is shown in equation form as equation 2.1. Advantages : Very economical Can measure both DC and AC current Current sensing is easy Applications : Current sensing Power sensing Proximity detection Speed detection

Electrohms is a widely prominent and popular name in the field of manufacturing and supplying varied range of hall effect current sensor in india.

Current Sensors, Amptec 640SL Ruggedized Intrinsically-Safe EED Tester