Decking Sheets Dealers in Bangalore

Decking Sheets are flat surfaces or platforms capable of supporting flooring and roofing sheets and these are connected to the outer or inner part of building structure. These sheets are very helpful in reducing the concentrated loading effect of roofing on the building structures by proper distribution of load. Steel, aluminum or alloy is usually used as the base material for manufacturing these sheets. In normal roofing and flooring, decking enables to transfer of the shearing forces and help to retain the proper structure of roofing. Further, for proper roof safety against leakage, UV rays, cracking, decking is an excellent support. We offer different range of decking sheets, which includes: Features Non-Fragile Greater loading capacity Excellent design Weather proof Offers excellent insulation against electricity, heat Greater span capability Dimensional stability of these sheets are excellent Have recyclable content

• Material: Steel
• Color: Grey
• Thickness of Sheet: 0.50 mm
• Application: Residential and Commercial
• Surface Treatment: Galvanised
• Manufacturing Technique: Forged
• Coating Mass (GSM): AZ-200GSM

Metal Deck slab is steel cum concrete slab consists of inbuilt shear connector with concrete on top together forms a part of the floor structure called composite slab. The composite floor profile offers the ultimate in the light weight steel decking which reduces concrete usage to provide a cost effective and alternative floor solution that easy to install.

• Type: Floor Decking Sheets

alfa is the leading decking sheet manufacturers and suppliers in bangalore, chennai, hyderabad, pune and ahemedabad.

Trapezoidal Metal Profile sheets with strong and reliable shear bond performance which is augmented by cross embossing located in the profile. The composite floor profile offers the ultimate in the light weight steel decking which reduced concrete usage to provide a cost effective and alternative floor solution that easy to install.   Application High Rise Buildings Multiplexes / Commercial Buildings Power Plant Buildings Office Buildings Mezzanine Floors in Industrial Buildings & Warehouses Steel deck fo rmezanine floors Thickness 0.8mm/1mm/1.2mm/1.6mm/2mm Technical Specification Base Metal High tensile structural grade steel Coating Mass 120, 180 & 275 GSM Coating Standard IS : 277 Yield Strength 240 MPA Premier Coating Minimum 10 Microns Colour coating Premier 10 Microns Bottom 25 Micron Available Finish Cold Rolled (CR) l Galvanised l Both side primer coated (Galvanised) Pre coated galvanised under side giving durable and attractive appearance and minimum future maintenance. Advantages Reduced Concrete usage: Tensile steel for composite slab construction that cuts down on slab thickness and dead weight of buildings. Providing a more sustainable solution and reducing costs. No separate formwork required for slab casting. Reduces construction time. Technical department at Alfa offers comprahas sive advisory of service on design of composite flooring should quiries arise which are not cover by this literature please contact us.

Steel decking of 88mm is suitable for Form-work and composite Roof Floor decking to cast 50-100mm thick (over the crest) slabs. The 88-200 profile configuration of the deck sheeting imparts high strength and stability, thereby permitting the provision of usage of relatively lighter sheeting and sheet span ability up to 3.0mtr. This results in substantial reduction in the cost of purlins. JMBS Deck sheeting is of CRCA, Galvanized sheet and pre painted galvanized steel. The capability of 88mm depth sheet for the wider spans has been tested at TOR Steel Research Center, Bangalore, and the test certificates, if required, shall be provided. The full economic benefits can be availed of our roof decking system when our system is incorporated at the design stage itself.

• Material: Stainless Steel
• Lead Time: Shipped in 0 days after payment
• Place of Origin: Karnataka, India
• Packaging Details: customized

Decking Sheets, roofing panel, Galvanized Steel, sandwich puff panels

Decking Sheets, cladding sheets, roofing systems

We are offering Karthik Roofings offers decking sheets which possesses the highest bond between concrete and the steel floor. It is produced from galvanized and colour coated steel. It acts as a positive reinforcement and a permanent form support providing saving in concrete and steel and also as a diaphragm. Available in thinner and lighter slabs and hence easy to handle and install.

Decking Sheets, Color Coated Roofing Sheets, Purlins

Decking Sheets, Purlin, Extrusion Services, Machining Job Work

Decking Sheets, capacitor discharge studs, Projection Welder

Floor Decking Sheet & Roof Covering, Metal Road Barrier

cold rolled decking sheets, Polycarbonate, plain sheet, gi decking sheets

Metal Deck Sheets, Standing Seam Roof Panel, Self Tapping Roofing Screw

floor decking sheet, ridge ventilator