Electric Pumps Dealers in Peenya, Bangalore

• Type: Disinfectant Spray
• Application: Office
• Style: Spray
• Feature: Easy To Use, Germ Killer, Prevent Infections
• Packaging Type: MS
• Packaging Size: 10L to 15L
• Material: MS

ENCEE Spray™ Electrostatic Disinfectant Spraying Machine. Developed by CSIR, Electrostatic Disinfectant Spraying Machine makes it easy to disinfect surfaces by covering more areas with increased effectiveness and reduced costs.Benefits:  Overdose Charged spray droplet reduces overspray and other ambiguities Uniformity Electrostatic disinfection machine is target-specific which uses less material and achieves 360° coverage Droplet Size produces uniform micro droplets as low as 10 microns, which is more effective in killing the pathogens and viruses It is 7-8 times more efficient than conventional spraying Charged sprays are more effective and efficient to kill the virus and microorganisms Easy to install and easy to use

• Capacity: 125 m3/h to 15000 m3/h
• Max Flow Rate: 180L/h
• Phase: Single Phase
• Frequency (Hz): 50
• Weight (Kilogram): 12Kg
• Material: Cast Iron

Owing to our expertise in this domain, we are engaged in offering an excellent quality array of Electronic Dosing Pumps. Having in-built facility for automatic control of dosing, these pumps can easily accepts signals or analogue signals of 0/4-20mA. The offered pumps are manufactured by the seasoned team of professionals using premium quality components with high precision as per industry standards. Also, the Electronic Dosing Pumps have an attribute for low-level indication in the dosing tank.  Features: Compact Size Double Ball Check Valves High Quality, Long lasting re-in forced PTFE Diaphragm Maximum stroke length of only 1.25mm, hence maintenance free No lubrication needed Discharge Range Accuracy ± 2% Handles any corrosive chemicals Can accept Potential Free Pulses and 4-20 mA signals Suitable for single phase power supply of 230V (AC) Specifications: High Quality Plastic pump body Steps i.e. 25%, 50% and 100% Stroke frequency adjustment 0% to 100% stroke length adjustment Can accept 4-20mA signals. Can accept external pulse signals. 0.75 LPH to 12 LPH Capacity Maximum pressure of 15 Kg/cm2

Operates up to 8 service ramps, Mainly supplied in the local area with single/ 3 phase motor  

• Fuel Used: Petrol
• Weight: 9.7 kg
• Operation Mode: Manual & Electric
• Outer Dimension: 1050x300x335 mm
• Fuel Capacity: 1.2 L
• Chemical Tank Capacity: 6 L
• Consumption Capacity: 2.0 L/H
• Fogging Capacity: 25 L/H
• Battery: Dry Battery 3 V, Storage Battery 6 V 3.3 Ah

(Pressure boosting and water supply applications) Suitable for water supply and pressure boosting in civil construction and industrial plants, the Ebara 3-3L series of horizontal centrifugal pumps are constructed of bulge formed stainless steel and designed for corrosion resistance, dependable performance, and continuous duty. Technical Details  Pressure range: 0-10 bar Head range: 0-80 m Flow range: 0-200 m3/hr Size range: 50mm-65mm-80mm Range: 3M-3S-3P Material of construction: pump casing - AISI 304 for 3 series/AISI 316L for 3L series; impeller: AISI 304 for 3 series/AISI 316L for 3L series; shaft - AISI 304/AISI 316L   Applications  Water supply to civil and industrial plants Pressure boosting Refrigeration towers Swimming pools   Key Features  Highly resistant construction Hydroforming process Ebara patent Can also work in vertical position

• Type: Water Pump Motor
• Color: Black, Grey, Light Green, Sky Blue
• Power: 1-3kw, 3-6kw, 6-9kw
• Driven Type: Electric
• Phase: Double Phase, Single Phase, Three Phase
• Application: Industrial Use
• Condition: New
• Pressure: High, Low, Medium
• Feature: Durable, Easy To Fit, Premium Quality, Rust Proof, Stable Performance
• Certifications: ISO 9001:2008

• Brand: Masand
• Tank Capacity: 16 lt
• Power Source: Manual
• Model Name/Number: Red Mirchi
• Pump Type: Manual
• Tank Material: Plastic

A hydrostatic test is a way in which gas cylinders can be tested for strength and leaks. The test involves filling the vessel or pipe system with a liquid, usually water, which may be dyed to aid in visual leak detection, and pressurization of the vessel to the specified test pressure. Pressure tightness can be tested by shutting off the supply valve and observing whether there is a pressure loss. The location of a leak can be visually identified more easily if the water contains a colorant. Strength is usually tested by measuring permanent deformation of the container. Hydrostatic testing is the most common method employed for testing Empty Cylinders. Using this test helps maintain safety standards and durability of a cylinder over time. Newly manufactured pieces are initially qualified using the hydrostatic test. They are then re-qualified at regular intervals using the proof pressure test which is also called the modified hydrostatic test. Testing of Cylinders for transport and storage of gases is very important because such containers can explode if they fail under pressure.

• Voltage: 230 / 400 Vac 3ph 50/60Hz
• Weight: One module 48 kg (105 lb), Two modules 65 kg (143 lb)
• Connections: X (1 1/4") / Y (1 1/4"NPT)
• Power:: 1.5 Kw (2 Hp)
• Protection:: IP55 clase F

The Electrofertic dosing pumps are motor driven piston pumps for dosing, made up of a worm gear reducer and one or two injection modules of 500, 750 or 1000 liter/hour with electronic regulation by means of a frequency Inverter. The dosing flow can be regulated from 10% to 100%. It is manufactured with materials which can resist any chemical. It is designed for all sorts of processes where it is necessary to dose a product into a hydraulic network, such as food, textile, chemical industry, water treatment, etc. MATERIALS Cylinder: P.P / AISI 316 / PVDF / PTFE Diaphragm: Elastomer base reinforced with fiber and P.T.F.E clothing Piston: Ceramic / PEUHMW Sealing: FPM Valve (body): P.P / AISI 316 / PVDF / PTFE Valve (ball): glass / glass borosilicate / AISI 316

Cosmic solar water pump for 3 phase motors, with efficiency of 98% deliver maximum energy in all conditions Transformer-less design, advanced electronics and optimized internal connections reduce potential energy loses. Balanced three phase AC output ensures grid compliance all times and precise MPP tracking at 99.9% in steady conditions and 99.8% in dynamic conditions enable the inverter to harvest all the energy of the PV modules

ProMinent Electronic Dosing Pumps CC3 & BProMinent Electronic Dosing Pumps CC3 & B ProMinent Electronic Dosing Pumps Type Concept CC3 and B are available in 16 models and upto a capacity of 60 I/hr. The ProMinent Electronic Dosing pumps are solenoid driven and controlled electronically by a PCB. The only moving part in the pump is the solenoid armature which has a maximum movement of 1.25 mm only, and therefoThe Developan diaphragm of the spump is made of high quality fabric reinforced EPDM with moulded in steel core and coating of teflon on the media contacted side. The Housings of the Concept CC3 pumps are made of Noryl plastic and for the B pumps the housings are made of die-cast Aluminium with chemical resistant coating. ProMinent CC3 The Concept CC3 and B pumps have the facility for accepting pulse or 0/4-20mA signals for automatic control of dosing.These pumps also have the in built feature for low level indication in the Dosing Tank through a tank level switch. Double ball valves on the suction and discharge side ensure maximum accuracy. The liquid ends of the Concept CC3 and B pumps can be offered in Acrylic (N), PVC (P), Polypropylene (PP), Teflon (T) or Stainless Steel (S). To select a suitable pump the following information is required Chemical to be dosed Capacity in litres/hour Back pressure   ProMinent Electronic Dosing pumps offer high technology based and proven solutions to any dosing requirement.e the pump is virtually maintenance free.   ProMinent Electronic Dosing Pumps Type Concept CC3 and B are available in 16 models and upto a capacity of 60 I/hr. The ProMinent Electronic Dosing pumps are solenoid driven and controlled electronically by a PCB. The only moving part in the pump is the solenoid armature which has a maximum movement of 1.25 mm only, and therefore the pump is virtually maintenance free.  

• Type: Hydraulic Pump Motor
• Condition: New
• Application: Industrial Use
• Driven Type: Hydraulic

Stainless Steel Borehole Motors, Stainless Steel Borehole Pumps

• Power: 3 HP
• Warranty: 1 year
• Motor Phase: Single Phase
• Usage/Application: Industrial
• Brand: HAWK
• Power Source: Electric
• Power Consumption: 2.2kw
• Model Name/Number: 150 bar

Fumigation Machine, Bain Circuit, Syringe Pump, Ventilator Circuit

Pumps, centralised lubrication systems, Oil Filters, Hydraulic Fittings

Trolley garden sprayer, Solar agriculture sprayer

Pumps, Submersible Pumpsets, pumping equipment

Pest Control Equipment