Electric Actuators Dealers in Bangalore

We manufacture Hydraulic Linear Actuator for 90º, 180º, 270º and 360º rotary movement with Hollow Spindle, Shaft Output, Spline with Coupling Model etc., Torque ranges available from 400Nm to 5400Nm.

Rotary Actuators are devices for converting the pressure energy in a fluid medium to useful rotary power. The rotary motion is usually limited to one revolution or less and hence they are also known as partial rotation motors or oscillators. “Tornado” Rotary Actuators are of Vane type design and Standard Models are available with upto 250.0 Kg.M. Torque at a maximum operating pressure of 70 Bar with a 250° angle of actuation. This design, with just a single moving part gives a long and trouble free service life with zero backlash. It is one of the most economical and compact devices in the market to generate very high torque, and zero back lash allows for very precise positioning at any position within its actuation angle.External stops will be required to stop and hold loads at desired positions and deceleration of high intertia loads shall be achieved through proper meter out circuits. The main features of these actuators are: Single moving part design Durable Trouble free service life with zero backlash Economical Compact in size Generates high torque Precise positioning at any point within its actuation angle The major applications are: Material handling equipment Rubber machinery Heavy door operation Special purpose machines Robotics Valve actuation Wire forming machinery Automation Indexers Manipulators Mobile hydraulic applications Machine tools Pipe bending machinery We provide customised solutions for individual applications based on the specific operating parameters demanded by each application.

• Voltage: 12/24V DC
• Ambient Temperature: -5
• Duty Cycle: 10% Max, 2minutes on/18 minutes off
• Stroke Length: 150 mm
• Speed At Rated Load: 4
• Brand: Bibus
• Protection Class: IP 54
• Thrust: up to 6000N

11 models ECL 0.5 to ELC 35. Max thrust from 5kN to 350 kN Two Worm Gear ratios, Normal and slow Push rod is Guided in external protection tube Suitable for manual operation and Electric Motor Standard head with internal threads fixed at push rod end is suitable for Attaching other types of attachments Swivel base, Swivel plate with trunion fixed to the housing base

• Type: Electric Linear Valve Actuator
• Country of Origin: Taiwan
• Model No: ML7420A6033 E
• supply voltage : -: 24 Vac ±15%; 50/60 Hz
• power consumption :-: 5 VA
• run time at 50 Hz :-: 1 min
• close-off force: :- ≥ 600 N

Model No : ML7420A6033 E   Product Type : Electric Linear Valve Actuator  supply voltage : - 24 Vac ±15%; 50/60 Hz   power consumption  :- 5 VA    signal input 0(2) Vdc   :- Actuator stem retracted. Two-way valve:”open”, three-way valve port A-AB:”closed” . run time at 50 Hz  :- 1 min   Manufacture : Honeywell     Usage : Indutrial Automation     Warranty : 1 Year   Origin : MADE IN TAIWAN

• Brand Name: Festo
• Type: Linear drive with displacement encoder
• Stroke Length: 40 - 990 mm
• Diameter: 160 mm
• Force: 4712 - 48255 N
• Features: Integrated displacement encoder,  A choice of integrated positioner and valve block,  Piston rod with male thread

• Features: Shear strength, Rugged design, Reliable operation

• Peak Load: 2200 kgf
• Stall Load: 3000 kgf
• Rated Load: 1100 kgf at rated voltage
• Rated Voltage: 80 ± 5 VDC
• Speed At Rated Load: 165 mm/second
• Stroke: ± 30 mm
• Size: 102 x 106 x 270 mm excluding controller
• Weight: 6.45 kg
• Total Time of Operation: 500 second
• Feedback Sensors: Tacho and LVDT

Linear actuator is an electrically operated device which help push or pull objects. These actuators can handle a lifting capacity of 200 – 12,000 Newton. They are quiet, safe and has a clean and accurate motion control. Linear actuators are widely used for applications like hospital bed, dental chair, ICU beds, OT tables and so on. Because these actuators are easy to install and required no maintenance most hospital bed and furniture manufactures prefer these actuators.

• Bore: up to 250 mm
• Stroke: up to 5000 mm

Cylinders as per ISO 6020-2 and ISO 6022 Pressure up to 320 bar ATEX version available Stainless Steel cylinders

Linear actuator with very good performance/cost ratio. These electric linear actuators can be used in broad range of applications, starting from furniture market such as tables, chairs, up to medical applications such as medical bed, dental chair and many others. From our product range you can choose the right product that fits your idea or application. You can contact BIBUS INDIA sales team with your requirements, our engineers will help you choose the right linear actuators for your requirement.  The main features include.  12-24 VDC version, load up to 6000N, Stroke up to 600mm, Speed up to 60mm/sec, Integrated limit switch as standard, Hall sensor or Reed limit switches as option, Protection up to IP66, Safety nut option, Some special versions fulfill the EN60601-1 standard, Special versions with only pull or only push option, Special versions with quick release option. linear actuator with remote Global warranty upto 3 years

• Duty Cycle: 10 %
• AC Voltage: 12V/24V .
• Function: Driving
• Input signal: 4-20mA(1-5V)DC
• Voltage: 48, 36
• Speed: 30 mm/sec / 50 mm/sec / 100 mm/sec

These units are primarily for lifting or lowering Masses in both Vertical & Horizontal planes. The weight to be lifted is from 250 kg (0.25 Tons) to 150000 kgs. (50 Tons through various Frames of 0.25 T 0.5T 2 T 2.5T 5T 10T 20T 35T 50T 100T 150T (T indicates Tonnage). These units give positive mechanical action, fail proof & Precise Positioning. The Height to be lifted (or) lowered can be upto 3000 MM. There are two standard speeds available viz., Normal lift & Slow lift. Housing Shell is made of Nodular (SG Iron) Casting from 2 Ton to 150 Tons. For 0.5 Ton & 1 Ton Models we use Aluminum shells & covers There are two types viz Lifting screw rod with the stationary head Rotating Screw rod and moving NUT. Both types have two further design possibilities of Design A (upward & Design (B) Downward. All the Jacks can be used on sideways (or) angular ways also Additional Accessories such as Anti-turn device, Anti Backlash Attachment, Wear Monitoring Unit, Telescopic Lifting Screws, Miter Gear Box, Bellows, Protective Pipes, Hand Wheel, Potentiometer, Limit switches are available.

We design and manufacture a wide range of custom built Rotary Actuators.

• Pressure: High Pressure
• Retracted length: 26"
• Rated Load: 1200 lb
• Stroke Length: 36"
• Speed At Rated Load: 9 in/min
• Voltage: 24 V DC

• Brand Name: Oriental Motor
• Frame Size: 130mm
• Features: High Efficiency and Energy Saving, High Power, High Rigidity, High Positioning Accuracy with Non-Backlash
• Permissible Moment Load: 50N m
• Frequancy: 50/60Hz
•  Current: 3.6A
• Permissible Speed: 200r/min
• Mass Control Circuit: 0.75kg
• Runout of Output Table Inner Diameter: 0.015mm

Certification according to Resistance Class 2 (DIN V ENV 1627 to 1630) Note: The previously valid preliminary standard DIN V ENV 1627:1999-04 has been replaced by the European standard DIN EN 1627 et seq. Sophisticated 7cm drive with finely framed ISO fitting Passage height up to 3000mm with MONO or ISO safety glass Perfect integration and retrofitting even in the slimmest of glass façades Escape and rescue version: escape route function with drive redundancy and low-wear two-motor technology Intelligent digital control (category 2 in accordance with DIN EN ISO 13849-1): Self-learning Optimal convenience thanks to automatic learning of door behaviour to the access frequencies Can be networked and integrated into the building technology management systems via CAN bus Independent error recognition and protocolling Setting options for all movement parameters of the door Very quiet operating direct current drive; low-wear, maintenance free motor Integrated battery for emergency opening and closing in the event of a power failure Robust power supply with integrated all-pole mains switch and fuse Certified in accordance with DIN 18650 Combination options with the GEZE SecuLogic access control as well as GEZE building technology management system

• Pressure: High Pressure, Low Pressure, Medium Pressure
• Voltage: 24 V DC
• Stroke Length: 4",5-29/32",6"

• Type: Electric Actuators, Electric Cylinder
• Material: Aluminum, Brass, Carbon Steel, Stainless Steel
• Color: Blue
• Voltage: 110V, 220V
• Power: Electronic, Hydraulic, Pneumatic
• Structure: Ball
• Certificate: CE Certified, ISO 9001:2015
• Port Size: 1.1/2inch, 1.1/4inch
• Number Of Way: 2way, 3way, 4way
• Brand Name: Hitork
• Brand Name: Hitork
• Product: Electric Cylinder
• Colour: Blue

• Voltage: 12 / 24 V D C
• Force Range: 5 N - 120 N
• Stroke: 2mm 35 mm

Solenoids basically are electrical devices used to convert electrical energy into linear mechanical motion. The energy produces within a solenoid can either be used to provide a straight linear pulling action, or it may be converted to provide rotary action. In either case the magnetic pull force increases as the air gap is reduced between armature and core. 

• Valve Motion: Linear Motion Valve
• Phase: Three Phase
• Actuator Type: Linear Actuator
• Brand Name: Aventics
• Structure: Control
• Speed At Rated Load: 8.9 in/min

• Material: Aluminum, Brass, Carbon Steel, Stainless Steel
• Application: Gas Valve, HVAC System, Liquid Valve
• Color: Blue, Green, Red, White, Yellow
• Voltage: 110V, 220V, 380V, 440V
• Power: Electronic, Hydraulic, Pneumatic, Solenoid
• Pressure: High Pressure, Low Pressure, Medium Pressure, Vacuum

• Actuator Operation Type: Electrical Operations
• Product size: 1/4 ” to 12 ” Available BSP , BSPT , NPT, etc.
• END Connection: Screwed End / Flanged End other types also Available on Request
• Maximum Working Pressure: Vacuum to 1500 bar, other Pressure are Available on request
• Circulation Media: Fluids, Air , Petroleum Products , Chemicals ETC,
• Rated Voltage: 12 , 24, 110, 230, AC/DC 9-35V, AC110-230V, 50 / 60 Hz Available
• Wiring control methods: CR2-01, CR2-02 , CR5-01, CR5-02, CR7-04,
• Working current: ≤ 500MA , ≤ 800MA
• Open/Close Time: ≤ 1 to ≤ 143 Sec
• Life Time: 70000 times to 1Lakh times & More
• Valve Body Material: Nickel Plated Brass, Stainless steel 304 & 316 (Optional Available )
• Actuator Material: Engineering Plastics , Alluminium Die Cast,
• Sealing Material: EPDM & PTFE , Viton (Optional Available)
• Actuator Rotation: 90° , 180° degree ,
• Max. Torque Force: 2 to 35000 Nm
• Cable Length: 0.5m,1.5m （Optional）
• Environment Temperature: -15℃ ～ 50℃
• Liquid Temperature: -196 ℃ ～250 ℃ other Temperature are Available on Request
• Manual Override: □ NO □ YES （Optional)
• Indicator: YES
• Protection Class: IP67 / Explosion Proofs

These heavy duty force generators apply equal axial forces in tension and compression with excellent dynamic characteristics. The design incorporates low friction, wear resistant seals for smooth and leak free operations. BISS actuators incorporate a monolithic piston design with inbuilt digital encoder of 0.1 µ resolution to track displacements, these features make our actuators more reliable with precise control to meet most of the demanding applications of testing. Double ended double acting monolithic piston design to apply equal axial forces in tension and compression, Coaxially mounted encoders with 0.1 micron resolution for precise control of displacements.

• Supply Voltage: 230VAC
• Duty Cycle: 230V-25% to 50%

Bossmanfilter Electric actuator designed for load requirements of up to 2500Nm. The actuator comes standard with two auxiliary switches (shared common, rated at 3A 250V Max), and in 12VACDC, 24VACDC, 120VAC or 230VAC supply voltages.

• Type: Linear Actuators
• Material: Aluminum, Steel
• Certification: ISO 9001:2008
• Color: Black, Blue, Red, Shiny-silver, Silver
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: High Strength, Reliable Functioning, Sturdiness
• Phase: Double Phase, Single Phase, Triple Phase
• Construction: Permanent Magnet
• Retracted length: 0-20Inch, 20-40Inch
• Surface Finish: Color Coated, Silver Coated
• Valve Motion: Electric Actuator, Linear Motion Valve

Rotolinear systems offer linear actuators. These actuators are with ball screws or lead screws depending on the application and normally with 12v dc /24v dc motor + 110/230vac converter + remote hand set. It is used for furniture, satellite, automation, dish antenna, fitness equipment, furniture’s, hospital equipment ect. The standard stroke available is upto 612mm and the max dynamic load carrying capacity is 800 to 8000n and static around 13600n. The speed of ball screw driven linear actuator will 4.5- 65mm/ sec. The protection will be ip65; ip54 depending on the models and preset limit switches is included. The optional accessories like potentiometer, hall effect sensors