Electronic Test Instruments Dealers in Mahalakshmipuram, Bangalore

• Warranty: 1 Year
• Brand Name: GW Instek
• Digit Display: 6.5
• Model No.: GDM-8261A
• DC Current (Ampere): 10A
• DC Voltage (Volt): 1000V
• AC Voltage (Volt): 750V
• Usage: Laboratory
• Model: Multimeter, Benchtop multimeter

The 3-Phase Power Monitoring system is a digital signal controller based system that can be used to analyze and record the power line signal going out of a power source. The system is capable of measuring non-sinusoidal voltage and current wave forms containing high harmonics. The instrument is used to measure and compute the Power, RMS Value of current, Power Factor as low as ±0.1 and communicates these parameters to the remote PC through MODBUS on RS-485 network.  

• Type: Ph Meter
• Certification: ISO 9001:2008
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Manual
• Body Material: Copper, Plastic
• Power Source: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Year

• Bandwidth: 25MHz
• Display: 7 Inch Color TFT-LCD Display
• Sampling Rate: 500MSa/Sec
• Channels: 2CH+1EXT
• Memory Depth: 32kpts
• Vertical Sensitivity: 2mV
• Trigger Source: CH1,CH2,Ext,Ext/5,AC Line
• Trigger Type: Edge, Pulse, Video, Slope, Alternative

Ours is a well-known entity, which is engaged in manufacturing, supplying, exporting and trading digital energy meter. Owing to their features like selectable ct ratio and source energy recording with display of voltage, current, frequency and power factor, these meters are applicable for generator panel and capacitive power plant. Engineered to perfection, these meters are available in different specifications. Features: precise engineering high material strength user-friendly details: true rms measurements accuracy class 1.0 2 –line, 16 char back lit lcd display confirms to is-13779 iec-62052-11& iec-62053-21 ct ratio- selectable from 55 to 30005 rs 485 port – mod bus protocol compact and ideal for industrial environment display parameters: e.b energy ( 6.3 format) line voltages (vr, vy, and vb with respect to neutral) line currents (ir, iy, and ib). Line frequency. Average power factor lag or lead active power- r ph, y ph, b ph & summation eb on hour l.e.d indications: presence of phases (r, y, b) reverse polarity specifications: accuracy class class1.0 frequency 50hz ± 5 % system voltage 415v ac110v ac auxiliary 40-275v acdc operating temperature 0°c to + 55°c ct ratio-field programmable 55 to 30005 in steps of 5 power consumption-sensing voltage current input auxiliary less than 0.2 va, less than 0.2 va, less than 5 va weight 300 grams models pdm9023 – 3ph. 4w dimensions 96x96x70 mm (wxhxd) mounting flush applications: electrical panels- ht & lt panels generator panel and capacitive power plant oem application test benches and laboratory equipment

• Application: Industrial
• Brand Name: Aspire Infra Solutions
• Display Type: Digital
• Rated Voltage: 12 Volt
• Warranty: 1 Year
• Rated Capacity: 2 - 200 Ah
• Packaging Type: Box
• Minimum Order Quantity: 1 Piece

Universal insulated input Easy to read screen Data acquisition @ 100ms With standard LAN port Large amount of data acquisition Independent temperature & voltage channel allocation Employs Compaq flash & SD cards

• Model: KM 876
• Display: 3-5/6 digits 6000 Counts Backlight LCD Display
• Update rate: 5 per second nominal
• Power supply: Four Alkaline AA batteries
• IP Rating: IP40
• Low Battery: approx. 4.6V
• APO Timing: Idle for 20 minutes
• Auto power off: Yes
• Weight: 635 gm with holster.

• Feature: Rugged construction, Easy to install, High accuracy

• Place of Origin: Karnataka, India
• Model Number: TFR 54 HF
• Packaging Details: As Per Customer Requirments.
• Lead Time: Depend on the order quantity.

We are offering new digital earth ground resistance tester.

• Feature: Sturdy construction, Accurate dimensions, Low maintenance
• Application: Laboratory
• Size: Standard
• Item Code: with-PC-Interface
• Type of Data Logger: Mechanical Data Logger
• Parameter to be Monitored: Humidity
• No. of Channels: Dual Channel
• Communication: Two Way

• Model: IS-3
• Usage/Application: INSULATION RESISTANCE MONITOR
• Brand Name: TOYO KEIKI Co.LTD

Name: GYRATORY SIEVE SHAKER,Code: 09065-01 ,ELECTRICALLY OPERATED, MAX. UPTO 8 SIEVES, OF 8" DIA. WITH CROMPTON MOTOR. OPERATION 230V SINGLE PHASE

• Application: Insulation Resistance
• Brand Name: TAURUS
• Country of Origin: Made in India
• Model Name/Number: IT 5A10
• Battery Type: Li-ion
• Battery Life: 8hr in single charge

• Power Supply: 1.5V (AM-3,R6 or "AA" size)x6
• Operating Temperature: 0 to 40 degree celsius,80% RH max. (Without condensation)
• Weight: Approx. 330g (Excluding batteries)
• Withstanding Voltage: AC 3700V,1 minute (Between input terminal and outer case)
• Battery check: DC 6.3V to 9.5V
• Function: Insulation resistance,AC voltage,Battery check

We offer Insulation Resistance Meters. Insulation resistance measurement:up to 40 TΩ measurement voltage any in the range of: 50…10000 V (50.1000 V at 25 V and 1.10 kV at 50 V), continuous indication of measured insulation resistance or leakage current.

Electrical Distribution Control & Relay Panel Power Control Centre Motor Control Centre Generator Control Panels Test Benches and Laboratory Equipments Wind Energy and Co-Generation Plants Air Conditioning/Refrigeration Plants Specification Accuracy class 0.5/1.0 Solid State version Built in transducers Built in Selector Switch or without selector switch Compact in size with Aesthetic value 7 segment red LED Display Tropicalised Design and time tested Low power consumption

• Accuracy: Better than +/- 0.1% of the range

Communication (RS 485RS232) with software up to 4 Alarms, 3 Inputs, IO.Common Independent Low & High Alarm relays for each channel.24VDC Power supply for 2 wire transmitters – on 3 channels. Advanced parameter protection function can be set to avoid any illegal operation. Flow integration with temp & Pressure compensation for steam & supersaturated steam.

Measures DC Power and shows totalized Ampere Hour and Watt Hour. LCD Screen 16character x 2 line. Powered by load or source. Max DC input voltage 30V. Max DC current measurement 50A. Display shows DC Voltage, Current, Wattage, Ampere Hour, Watt Hour, Minimum input voltage, Maximum current. Great for totalizing power to battery from AC Charger or Solar source or measuring UPS power consumption. May be configured for up to 60V DC input. Introduction: Solar Power Meter measures and calculates electrical parameters for Solar Installations.  This is also useful to measure battery condition and load drain.   Features Measures energy (Wh), charge (Ah),  power (W), current (A) and voltage (V) Accurate & precise – 0.01 A current and 0.01 V voltage resolutions Measures peak Amps, peak Watts and voltage minimum (droop) Rugged – handles 50 A continuous and 60 A peak at 30 V 2.5SqMM multi-strand insulated wire flying leads connect to input and output Small & light with a tough plastic case Acts like a wire so doesn’t affect load performance. Precision Alu-Chrom current Sensing resistor, with only 0.001 Ohms resistance and circuitry that draws only 17 mA Factory calibration stores constants in EEPROM to compensate for component tolerances Powerful, 8 MIPS micro-controller Made in INDIA to quality standards One-year warranty and complete user manual

Description: TABLE TOP DIGITAL PH METERS, MODEL :PH1200MAKE: HORIBA, JAPANSophisticated, Simple, Rugged, Reliabe Large 5.5” LCD Display, with small foot print, and soft touch panel.* 5 Point Calibration (USA / NIST), With ATC.* Range: -2.000 to 19.999 pH; ± 1999.9 mV* Resolution: 0.1 pH / 0.01 pH / 0.001 pH; ± 0.1 mV* Accuracy: ± 0.003pH; ± 0.2 mV*Temperature: -30.0°C to 130°C ; Accuracy: 0.5°C* Auto Shut off, with Hold function* 999 Memory storage, with Data logging* USB / RS232C* GLP / GMP** Date / time stamping of calibration, Number of calibration points done .The instrument comes complete with pH electrode, Electrode stand, and Instruction Manual. 08001-15

• Features: Easy one-hand operation,Large white LED back light to work

Being a client centric organization, we are engaged in manufacturing and supplying a wide range of Energy Meter Panels. Our panels are extensively acclaimed for robust construction, accurate dimensions, dimensional accuracy and high performance. Widely used in numerous industrial sectors, our panels are available in standard specifications and sizes. These are also acclaimed for perfection in reading and fine operations. Our panels are offered at cost effective prices.Features: High functionality Easy to install Maximum consistency Non-corrosive Smooth functioning Robust construction

The Abrasion Tester is suitable for testing different materials in different industries. The Abrasion Tester that we bring forth is available in varied types to meet the demands of the customers. Moreover, the Abrasion Tester is offered at market’s leading prices that easily fit in the budget of one and all. Types : Wet AbrasionLinearDinRotary Meets Standards Of : ISOISASTMMILDINJISBS

Digital Meters, load managers, multi function meters, Energy Meters

Digital Capacitance Meter, transformer ratio meter, Data acquisition recorder

digital multi meter, components register, rf microwave components

analog oscilloscopes, Spectrum Analyzers, Sentry Counterfeit IC Detector

tablet oscilloscope, educational trainer kits, Multimeter, Ir Thermometer