Electronic Test Instruments Dealers in Nandini Layout, Bangalore

• Feature: Rugged construction, Easy to install, High accuracy

• Features: Competitive prices, Best grade materials, High strength
• Usage: Industrial
• Channels: 2
• Mainframe Size: Miniature
• Display: Digital

• Model: KM 876
• Display: 3-5/6 digits 6000 Counts Backlight LCD Display
• Update rate: 5 per second nominal
• Power supply: Four Alkaline AA batteries
• IP Rating: IP40
• Low Battery: approx. 4.6V
• APO Timing: Idle for 20 minutes
• Auto power off: Yes
• Weight: 635 gm with holster.

• Battery volts: 6/12 V

High Rate Discharge Testers are designed to test crankingperformance of Automotive (SLI) Batteries as per various National and International specifications. The unit comprises of Electronic Active Load to discharge Battery at high current. (Normally at 3*C20 or 5* C20) keeping the current constant through out the test. The test is terminated automatically when the Battery reaches the preset ‘End Voltage’.Micro processor based digital timer with non volatile memory records the discharge time precisely up to 0.01 seconds. The unit is rated for short duty of Max. up to 10 minutes. However it can be used for continuous discharge at lower currents (30% of its max. capacity) to test Capacity of Battery at C1, C3, or C5 ratings.

Simultaneous display of forward and reverse power Measurement of average power, average burst power, peak power, crest factor, CCDF and mismatch 5" color touchscreen Direct operation of the R&S®NRT-Zxx directional power sensors from a PC Frequency range from 25 MHz to 4 GHz (sensor-dependent)

• Application: Industrial
• Brand Name: Aspire Infra Solutions
• Display Type: Digital
• Rated Voltage: 12 Volt
• Warranty: 1 Year
• Rated Capacity: 2 - 200 Ah
• Packaging Type: Box
• Minimum Order Quantity: 1 Piece

Ours is a well-known entity, which is engaged in manufacturing, supplying, exporting and trading digital energy meter. Owing to their features like selectable ct ratio and source energy recording with display of voltage, current, frequency and power factor, these meters are applicable for generator panel and capacitive power plant. Engineered to perfection, these meters are available in different specifications. Features: precise engineering high material strength user-friendly details: true rms measurements accuracy class 1.0 2 –line, 16 char back lit lcd display confirms to is-13779 iec-62052-11& iec-62053-21 ct ratio- selectable from 55 to 30005 rs 485 port – mod bus protocol compact and ideal for industrial environment display parameters: e.b energy ( 6.3 format) line voltages (vr, vy, and vb with respect to neutral) line currents (ir, iy, and ib). Line frequency. Average power factor lag or lead active power- r ph, y ph, b ph & summation eb on hour l.e.d indications: presence of phases (r, y, b) reverse polarity specifications: accuracy class class1.0 frequency 50hz ± 5 % system voltage 415v ac110v ac auxiliary 40-275v acdc operating temperature 0°c to + 55°c ct ratio-field programmable 55 to 30005 in steps of 5 power consumption-sensing voltage current input auxiliary less than 0.2 va, less than 0.2 va, less than 5 va weight 300 grams models pdm9023 – 3ph. 4w dimensions 96x96x70 mm (wxhxd) mounting flush applications: electrical panels- ht & lt panels generator panel and capacitive power plant oem application test benches and laboratory equipment

• Size: 0.5 - 2 Inch
• Display: Analog
• Material: Brass
• Brand: Belanto
• Line Size: 15mm to 40mm
• Usage/Application: Domestic
• Standards: ISO 6046
• Model Name/Number: King

• Brand Name: LABTICAL
• Material: ABS BODY
• Material: ABS BODY
• Color: White
• Power: 20 W
• Power Source: Electric
• Certification: CE Certified
• Feature: Accuracy, Durable, Light Weight
• Voltage: 230V
• Display Type: Digital
• Type: Ph Meter
• Weight: 100-200gm
• Frequency: 50Hz-65Hz
• Warranty: 1Year
• Country of Origin: India

• Place of Origin: Karnataka, India
• Model Number: TFR 54 HF
• Packaging Details: As Per Customer Requirments.
• Lead Time: Depend on the order quantity.

We are offering new digital earth ground resistance tester.

• Material: Mild Steel
• Input Voltage: 220V
• Frequency: 50 Hz
• Measurement Range: 300 mm
• Operating Temperature: 60 Degree C.
• Distance Across The Poles: 2 inch
• Lifting capacity: 5.5 kg
• Usage/Application: Industrial

• Type: Digital
• Weight: 300 Gms
• Color: Grey
• Phase: Three
• Brand: Elmeasure
• Model Name/Number: LG+1119
• Usage/Application: Industrial
• Version Of Communication: RS 485(Optional)
• PF Display: Programmable
• Accuracy Class: CL0.5,CL1.0

The Valstat® V 300 is very sensitive; its resolution is 1 volt at the standard measurement distance of 2" (about 5 cm). The meter is designed to effectively measure the magnitude and polarity of the surface voltage with greater clarity and speed than what has been possible before. The V 300 is ideal for measuring electrostatic charges in plastic, paper, packaging, textile, food, pharmaceutical, electronic, and other industries. Weight: 150 g Calibration: Factory calibrated to Indian standards, valid for 1 year Dimensions (in mm): 125 × 75 × 29 (L × B × H) Reset: Causes the display to set zero Power supply: Standard replaceable 9 V battery. "Low battery" display provided Test actuation: On/Off push button Accuracy: Typical maximum error is ± 20 percent of reading Display: High resolution 3.5 digit LCD display with polarity indication Range: ± 19.99 kV at 50 mm from object Accessories: Grounding cord 2 m

• Model: IS-3
• Usage/Application: INSULATION RESISTANCE MONITOR
• Brand Name: TOYO KEIKI Co.LTD

  Electrical Distribution Control & Relay Pan Power Control Centers Motor Control Panels Test Benches and Laboratory Equipments Wind Energy and Co-Generation Plants Air Conditioning / Refrigeration Plants Specification Accuracy class 0.5 / 1.0 Micro Controller based Built in transducers Built in Selector Switch Built in Scroll / Hold Facility Field Selectable CT Ratio Compact in size 2-Line, 16- Char back lit LCD Display Tropicalised Design and Time Tested Low Power consumption Scroll Facility Continuous display of line voltage, phase voltage, three phase currents and system frequency

Measures DC Power and shows totalized Ampere Hour and Watt Hour. LCD Screen 16character x 2 line. Powered by load or source. Max DC input voltage 30V. Max DC current measurement 50A. Display shows DC Voltage, Current, Wattage, Ampere Hour, Watt Hour, Minimum input voltage, Maximum current. Great for totalizing power to battery from AC Charger or Solar source or measuring UPS power consumption. May be configured for up to 60V DC input. Introduction: Solar Power Meter measures and calculates electrical parameters for Solar Installations.  This is also useful to measure battery condition and load drain.   Features Measures energy (Wh), charge (Ah),  power (W), current (A) and voltage (V) Accurate & precise – 0.01 A current and 0.01 V voltage resolutions Measures peak Amps, peak Watts and voltage minimum (droop) Rugged – handles 50 A continuous and 60 A peak at 30 V 2.5SqMM multi-strand insulated wire flying leads connect to input and output Small & light with a tough plastic case Acts like a wire so doesn’t affect load performance. Precision Alu-Chrom current Sensing resistor, with only 0.001 Ohms resistance and circuitry that draws only 17 mA Factory calibration stores constants in EEPROM to compensate for component tolerances Powerful, 8 MIPS micro-controller Made in INDIA to quality standards One-year warranty and complete user manual

• Warranty: 1 Year
• Brand Name: GW Instek
• Digit Display: 6.5
• Model No.: GDM-8261A
• DC Current (Ampere): 10A
• DC Voltage (Volt): 1000V
• AC Voltage (Volt): 750V
• Usage: Laboratory
• Model: Multimeter, Benchtop multimeter

BTU meters measure the energy content of liquid flow in British thermal units (BTU), a basic measure of thermal energy. BTU meters are used in chilled 

• Model Number: M260
• Brand Name: Multi
• Warranty: 6 Months
• Battery: 1.5V (AM-4, LR03 or AAA)x2
• Jaw Open: 55mm
• Digit Display: 3.5 digit LCD, max. reading of 3999
• Low Battery Indication: "Battery" mark on LCD
• Operating Temperature: 0 degree C to 40 degree C, 80%RH max. ( Without condensation )