Electronic Test Instruments Dealers in Peenya, Bangalore

• Max. discharge current: 10 A
• Battery voltage: 6/12 V

ELIND Rated Capacity Tester is used for measuring Ampere Hours Capacity of battery at desired rate viz., C20, C10, C5 etc as per various National as well as International specifications. It comprises of electronic active load to discharge Test Battery at constant current which can be set precisely to desired level by adjusting a multi turn potentiometer. The test is terminated automatically when the battery voltage reaches the set END voltage and the time of discharge Ampere Hours discharged is recorded precisely on digital Timer or Ampere Hour meter.

• Material: Mild Steel
• Input Voltage: 220V
• Frequency: 50 Hz
• Measurement Range: 300 mm
• Operating Temperature: 60 Degree C.
• Distance Across The Poles: 2 inch
• Lifting capacity: 5.5 kg
• Usage/Application: Industrial

• Warranty: 6 Months
• Model Name/Number: B2101
• AC Current: 1000 Amps
• Jaw Open: 18 mm
• Brand: Beetech
• Usage/Application: Industrial
• Digit Display: LCD
•  :  

The output signal from the Valstat® SM20 online electrostatic charge sensors ( minimum 1, maximum 18 sensors) can be connected to one or more colour touch panel HMIs for remote or local continuous monitoring and analytics. The collected data is monitored and when the measured value exceeds the measurement range or a pre-set safety level, an alarm sounded. The collected data can be stored, retrieved and analysed. Distinct from a hand-held meter that is used to periodically measure static charges, the Valstat® SM20 is permanently fixed at the location where the target is to be monitored. Hence, variations in measurement due to different operators, location, and distance are completely eliminated. As a result, a real-time, accurate, and continuous signal proportional to the static charge is made available for further analytics and diagnostics. The discharge or neutralising effect of the static charge eliminator is efficiently monitored for continual safety, and preventive maintenance. Expensive man-hours for inspection, testing, and validation are also effectively reduced.

ACCURACY +-0.5% + 1 DIGIT RANGE L 0-2000H C 0-2000UFD R 0-20 MΩ RESOLUTION 0.1µHPFΩ DISPLAY 3 ½ DIGIT 0.5” LED MEASUREMENT FREQUENCY 1KHz UP TO 2µFH,100Hz FOR ABOVE 2µFH DISSIPATION FACTOR 3 DIGIT DISPLAY PROVIDED MEASUREMENT REMOTE KELVIN SENSING POWER AC MAINS 230 V ± 10%, 50Hz SIZE All Address, Data and Control signals are terminated in 50 pin berg stick for user expansion WEIGHT LESS THAN 3 KG

An ultrasonic flow meter is a volumetric flow meter which requires particulates or bubbles in the flow. Ultrasonic flow meters are ideal for waste water applications or any dirty liquid which is conductive or water based. To meet the various requirements of the customers, we are involved in offering a wide assortment of Ultrasonic Flow meter Battery Operated.

• Power Source: UITM-11
• Brand Name: Unitech
• Usage/Application: Training
• Indicator: 31/2 Digit to Read +-1999 Counts
• Capacitance Sensor: Linear-Parallel plate capacitor Angular-Gang Condenser
• Displacement: 50 mm
• Power Supply: 230V +-10%@50 Hz

• Benefits: Use Ceramic reflector cavity,Use pure quartz filter

• Weight: 168 grams (including battery)
• Dimensions: 142mm x 81mm x 25mm (h x w x d)
• Indicator leds: Power - Red, No Ions Detected - Red Flashing, AC Ions Detected - Yellow, Positive Ions Detected - Re
• Battery: 2 x AA alkaline

The Meech Model 984v2 Ion Sensor is an easy-to-use device for checking the performance of both AC and DC powered static eliminator bars. Indicator lights confirm the presence of ions and, in the case of a DC power source, their polarity. Regular monitoring of installations with the model 984v2 will indicate when bars require cleaning or other maintenance work, thereby ensuring that bar performance and process efficiency can remain at the optimum level.     Features & Benefits Simple to operate Provides reproducible results Detects Ions Unlike other devices that measure only electrical field strength, the 984v2 provides a direct indication of ionization performance Operates with both AC and DC power sources Can be used with a range of different types of installed equipment and with equipment from different manufacturers. Measures bar performance in”situ” Avoids the need to remove the bar for testing. No user serviceable parts No maintenance – only periodic battery replacement is required.

The Flair series is a range of single-function digital panel meters for accurate and reliable measurement of electrical quantities (including voltage, current, power, power factor, energy and frequency) for industrial and commercial applications. All models are compact, user-friendly and easy to fit into standard panel cut-outs.  Application HV and LV switchgear panels. Control and relay panels. Power control centre (PCC) panels. Motor control centre (MCC) panels. Test benches. Laboratory equipment.   Benefits Compact size: two Flair Mini meters will fit into a standard DIN 96 cut out. Easy to fit and use.

• Type: Digital
• Weight: 300 gms
• Certification: CE,RoHS
• Phase: Three
• Brand: Delta
• Model Name/Number: Rish Delta Energy
• Usage/Application: Industrial
• Version Of Communication: MODBUS (Optional)
• Current: 1A/5A
• Operating Temperature: -15 To 55 Degree C
• Ct Range: 1A/5A
• Protection Type: IP 50 (Fron t Face)
• Communication Protocol: MODBUS
• IP Rating: IP 45

• Features: Various sizes , Fine finish , Easy to use.

We are one of the notable SCADA developing companies, our SCADA solutions are provided to power generation sector, process industries, with a remote monitoring / control function built in as per customer specific requirement. SCADA is the acronym for Supervisory Control and Data Acquisition. The supervisory control system is a system that is placed on top of a real-time control system. The term SCADA usually refers to centralized systems which monitor and control entire sites, or complexes of systems spread out over large areas. Data acquisition begins at the RTU or PLC level and includes meter readings and equipment status reports that are communicated to SCADA as required. Data is then compiled and formatted in such a way that a control room operator using the HMI can make supervisory decisions to adjust or override normal RTU (PLC) controls.

• Power Source: Power Source
• Measuring Modes: Distance, Continuous, Area, Volume, Side
• Measurable Range: 0.5 - 50m (1.64 - 164ft)
• Minimum Measurement Unit: 1mm (0.039
• Measuring Accuracy (repeated): ±1.5mm (1/16
• Measuring Time: 0.5 - 3.0sec.
• Laser Diode: 650nm, ‹1mW
• Laser Class: Class II

Display with back light for ease to see in dark areas Side measure button easy to push in narrow spaces Battery level indicator: Four-stage display Five measuring modes: distance, continuous, area, volume and side Compact and lightweight at 0.14kg

• Feature: Rugged construction, Easy to install, High accuracy

• Brand: Systronics
• Payment Terms: T/T (Bank Transfer)
• Model Number: 304
• Usage: Laboratory
• Temperature : 0 - 1000 Degree Celsius
• Voltage : 220V
•  :  

Biovision Services is one of the leading suppliers of pH Meter includes handheld model, lab model and more.

Micro Ohm Meter.4 wire kelvin clip Micro Ohm meter has the resolution down to 1 micro Ohm, Best current of 1 A best protections in the class, rugged, Micro processor controlled, over current, over temperature protection. Milli Ohm MeterKelvin clip, high accuracy of 0.5% is established in 100 mA, the best resolution of 0.1 mOhm meter. Over temperature protection, advert current protection,

With the implementation of modern and sophisticated technology, we are involved in offering Dual Channel Data Loggers. The offered Dual Channel Data Loggers have dual channels for efficient operations. Moreover, these Dual Channel Data Loggers are easily available in the industry at customer’s demand. Features: Best grade material High performance Most reasonable price