Electronics Training Kit Dealers in Laggere, Bangalore

32 inputs using 8-way four DIP switches. Each input of these switches has an LED indication. 32 outputs through output ports of FPGA connected to LEDs. 16x2 Alpha�Numeric LCD display with back-light through 10 PIN FRC Connectors to FPGACPLD port pins. Six-digit 7-segment displays connected through 10 PIN FRC connector to FPGACPLD port pins . 4x4 key matrix. 10 MHz, 5 MHz, 1MHz, 500 KHz, 100 KHz - five different clock frequencies. On-board Relay connected using 10 pin FRC to FPGACPLD port pins. On-board Traffic Light Simulator connected to FPGACPLD port pins using 16 pin FRC. On-board ADC connected to FPGACPLD port pins using 16 pin FRC. On-board DAC is provided to generate different waveforms and it is connected to FPGACPLD port pins using 16 pin FRC. On-board four level Elevator connected to FPGACPLD port pins using 16 pin FRC. Two-pin reliamate is provided on the board to connect external DC motor and it is connected to FPGACPLD port pins using 10 pin FRC. 5-way PowerMate is provided to connect external stepper motor and it is connected to FPGACPLD port pins using 10 pin FRC. 26-PIN FRC header with Cable for connecting to ALS standard interfaces. 8 inputs using 0ne DIP switches. Each input of these switches has an LED indication. One push button Four sets of 20x2 female berg connector to plug the DAUGHTER BOARD

Embedded Trainer Kit, analog communication trainer kit

• demension: 8. 25" x 4. 5" ( 210 x 115 mm) , 0. 062" t hi ck,6 layers

Texas Instrument’s TMS320C6713 DSP operating at 225 Mhz,Embedded USBJTAG controller with plug and play drivers, USB cable included,TLV320AIC codec,2M x 32 on board SDRAM,3 Expansion connectors (Memory Interface, Peripheral Interface and Host Port Interface),On board IEEE 1149.1 JTAG connection for optional emulator debug,Four 3.5 mm audio jacks (microphone, line-in, speaker and line out)

analog communication trainer kits, digital communication systems

• RAM: 88 K bytes
• Automation Grade: Semi-Automatic
• Brand Name: GSAS Micro Systems
• Power Supply: +5 V
• On Board Memory: 128 K bytes
• Port Lines: 9

This apparatus enables the student to study the characteristics of composite structures and its heat transfer ability across the composite walls by altering the combination of slabs. The apparatus consists of three slabs of different materials of same thickness. The slabs are brought together in contact. The three slabs are brass, M.S and asbestos. One surface of the slab is electrically heated and the other end is cooled, .the temperatures of the slabs are measured using thermocouples and are indicated by temperature indicator. The power Input to the heater is measured by Voltmeter and Ammeter.

analog trainer kit, Pic Programmer, Digital Stop Clock, Signal Generator

power electronics, control lab equipments, Electronic Products

Microcontroller training kit, microcontroller boards

educational trainer kits, tablet oscilloscope, Multimeter, ohm meter

8086 Microprocessor Trainer Kit, Spectrum Analyzers

trainer kits, Oscilloscope, spectrum analyser, test instruments

RF Frequency Synthesizers