Filter Assembly Dealers in Rajajinagar, Bangalore

We offer a wide variety of membrane filter support glassware for most scientific applications that require vacuum filtration.1. Choose the appropriate support glassware that fits the diameter of the filter membrane you are using (25, 47 or 90mm).2. Choose the appropriate connection for the flask or bottle you will collect the filtrate in.The following information will help you select the most appropriate glassware for your specific application.   FILTER SIZE 25mm Support glassware is designed for filtering small volumes of liquids in particulate or biological contamination studies.47mm Support Glassware is recommended when analyzing up to 500 ml. of liquids for particulate or biological contamination, water/waste water analysis (reference: standards methods for the examination of water and waste water, 18th Edition, 1992), sterility testing of pharmaceuticals by the bacteria retentive filter method (reference: U.S. Pharmacopeia XXIII), and for preparing particulate free or sterile filtrates.90mm Support glassware is recommended for filtering large sample volumes, liquids with a heavy particulate load and viscous liquids when a high flow rate is required. The larger filter area can provide filtration rates up to four times faster than 47 mm assemblies.   SUPPORT STYLE Fritted Glass Supports. Filtration assemblies with fritted glass supports are recommended for general membrane filtration analysis of samples for microbiological or particulate contamination. This support style is recommended when using gridded filters because the glass frit provides the most even distribution of the sample through the filter membrane. All of the fritted glass support bases have a coarse (40-60μm) porosity.   CONNECTION TO FLASK/BOTTLE Silicone Stopper Connections. Silicone or neoprene stoppers are the most common connector from the filtration assembly to a Erlenmeyer style flask and are recommended for most routine filtration studies of aqueous solutions. Stoppers are not recommended when filtering organic or most corrosive solutions or when preparing HPLC mobile phase.Ts 40/35 Glass Joint Connections. Filtration assemblies with Ts 40/38 outer joint connections are recommended when filtering corrosive solutions and organic solvents. This connection style is also recommended when preparing HPLC mobile phase, since the “all-glass” connection eliminates phthalate contamination that can occur when using silicone or neoprene stoppers.47 mm All Glass Filtration Assemblies with GL45 Thread Connection Designed to collect the filtrate directly into a media-type bottle.    

Oil Bath Air Cleaners, Dry Air Cleaners, Lube Oil Filter Assemblies and strainers for hydrolic applications are manufactured to customer specifications.  

Situated in Bangalore, we are chiefly engaged in manufacturing, supplying and exporting the high-quality Big Blue Carbon Block Filter Cartridges across the world. To tune with the international quality standards and evolving demands of the customers, we fabricate these Cartridges using quality-certified materials and most up-to-date techniques. Further, we dole them out quality tested in many specifications, at nominal rates. Also, we timely fulfill bulk orders!Details : It removes any remaining impurities that could cause foul taste or odor. DP is a full range of housings for cartridge height at 5”, 7”, 10” and 20”, especially designed to fit to both standard SX (DOE) cartridges and to BX cartridges with 45 mm double o-ring collar. Exclusive Mono, Duo and Trio patented and registered models are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute quality of our products. DP housings are certified under the most stringent certification procedures and standards: DM 25 (Italy), ACS (France), GOST (Russia). With female IN/OUT configurations from 1/4” up to 1”1/2, with BSP or NPT threads, with or without brass inserts, and with male IN/OUT configurations at 1/2”, 3/4” and 1” with BSP threads DP housings are suitable for every Point-of-Use (POU) and Point-of-Entry (POE) application, as single- or multi-stage on-line filters, under-sink filters, Reverse Osmosis pre-filtration units. A wide range of combinations with clear and opaque bowls and colored heads make it possible to respond to every custom requirement upon minimum quantity. Every housing is provided with FilterFit, the centering device which holds cartridges perfectly standing into the housing. DP 10 MONO housings for cartridges 10” and 20” are available also as S models with discharge valve and self-cleaning performance. S models can be used with KIT AUTO for automatic flushing and self-cleaning. DP MONO housings are available also as M models with 2 manometers. A full set of accessories is available on demand to complete the housings kit: wall brackets for Mono, Duo and Trio models, opening spanner, standing bases and brass or plastic nipples with o-ring.

• range: 1 to 1500 microns

Bossmanfilter manufacturers a wide range of filter bags to many applications. Highly controlled manufacturing procedures ensure consistent quality and no contamination. The unique bag designs provide added strength and avoids risk of bypass. Our filter bags will fit all industry-standard bag housings. Nomex filter bags, PPS filter bags, P84 filter bags, Fiberglass filter bags, Normal polyester filter bags, Anti-static filter bags, Wateroil proof filter bags, PTFE filter bags, Arcylic filter bags.

filter nets, Mosquito Nets, shed nets, Insect Nets, vegetable nets

filter components, lube oil filters, engine oil filters

Filter Housing, Pharmaceutical Formulation Machineries, IPC Bins

Air Filter Paper, Coolant Filter Paper, float ball, Polyester Filter Paper

ammonia paper

Filter Bags, Woven Bags