Filter Housings Dealers in Bangalore

Duplex Filter Design permits continous operation as flow can be directed to either housing while the other is serviced. One lever controls all valves,which seal bubble tight

• Type: Stainless Steel Bag Filter Housings
• Application: Filteration Use
• Finishing: Polished
• Pressure: Medium Pressure
• Country of Origin: India
• Brand Name: Micropore
• Certification: ISO
• Material Grade: MS/SS

Bag Filters and basket strainers, Filter Bags are desigend to customer technical data . The flow starts from 5m3/hr to 200m3/hr. Made out of MS /SS 304/ SS 316 etc , These filters are suitable for Liquid filtration to the extent of 1 micron.

These filter housing offer low price, greater dirt holding capacity and higher flow rates. Less space occupancy, more flow,economical.

• Feature: Polyester: – Water treatment; – Electronic/Nuclear; – Biotechnology/Fine chemicals; – Food/Beverage; – Coatings/Resins; – General Industrial; – Pharmaceutical/Cosmetics; – Bulk chemicals/Petrochemicals.

Pleated cartridges represent a valid filtering solution for diverse applications. Certified raw materials are used and have particular technical characteristics that give the cartridge reliability and resistance. An important factor of quality is the mechanical resistance. In both cases of Polyester cartridges, the resistance is given by using 100% pure endless fibres. After pleating, which takes into account fixed parameters (pleats dimensions and quantity) that guarantee maximum efficiency, the element is mounted around a polypropylene rigid core thus assuring stability. It is then all placed inside a polypropylene cage which both ends are closed by end caps. The pleated cartridge allows a vast filtering surface while the PP cage has symmetric slots along all the surface of the cage itself therefore allowing the water to flow equally along all the sides of the cartridge and avoiding the water penetrating just one specific area. This results in a longer life and major efficiency. The Polyester cartridges can be reused over and over again without loss of efficiency. It is obvious though that the life of these cartridges depend on the working conditions. Even though the maintenance is frequent, It is recommended not to use such cartridges under extreme conditions. Due to the fact that bacteria will undoubtedly grow and nest within the fibre, simply washing a cartridge does not mean it will last forever. Therefore as all washable cartridges, it is recommended to frequently change them in order to guarantee a safe filtration. Thanks to its compatibility with a vast numbers of chemicals, polyester can be used also in specific applications where othermaterials are not compatible with reagents and/or chemical solvents.Regarding the applications of Polyester cartridges, these are particularly adequate for use in potable water because the raw materials used are compatible. Model CODE DESCRIPTION A4080230 CARTRIDGE AQUA PRO 9″3/4 PL3MIC A4080140 CARTRIDGE AQUA PRO 9″3/4 PL20MIC A4080150 CARTRIDGE AQUA PRO 9″3/4 PL50MIC A4080240 CARTRIDGE AQUA PRO 20″ PL3MIC A4080160 CARTRIDGE AQUA PRO 20″ PL20MIC A4080170 CARTRIDGE AQUA PRO 20″ PL50MIC A4080180 CARTRIDGE AQUA PRO 9″3/4 PL20M AQUA BIG A4080190 CARTRIDGE AQUA PRO 9″3/4 PL50M AQUA BIG A4080200 CARTRIDGE AQUA PRO 20″ PL20M AQUA BIG A4080210 CARTRIDGE AQUA PRO 20″ PL50M AQUA BIG A4080570 CARTRIDGE AQUA PRO 30″ PL20M D.38 AQUA BIG A4080580 CARTRIDGE AQUA PRO 30″ PL50M D.38 AQUA BIG

meet specification of pharma industry and to meet latest gmp requirement all our housings meant for sanitary, applications are provided with mirror finish on both , sides and are also electro polished to 240 grit finish. They are suitable to adapt filter element of standard length like 10”,20”,30”,40” , having end connection like doe, code 7, to suit all international designs . These filter cartridge are available in nominal rated like wound / spun bonded or absolute rated like pleated pp cartridges unto 0. 2 micron. The cartridge dia 2. 5”,4” (jumbo) material – pp/ ss. APPLICATIONS: Water filtration for domestic / industrial RO pre filtration Mineral water/ food industry Beverage pre and final filtration Brewery guard filtration Microelectronics and semiconductor industry pre filter Electroplating industry Pharmaceutical & chemical product filtration

• Country of Origin: India

we are offering housings

• Type: Filter Housings
• Material: ABS Plastic, Aluminum, Stainless Steel
• Application: Water Filteration
• Color: Creamy, Off White, White
• Condition: New
• Finishing: Non Polished, Polished

Single element housing designed to accommodate 25.4 cm (10 in), 50.8 cm (20 in), and 88.9 cm (35 in) length elements. Other sizes are available upon request. Housings are constructed of 316L stainless steel for strength and corrosion resistance Designed for use with Pall's Ultipleat® Polymer candles and fan pleat polymer candles Straight through assembly – fluid flow enters and exits in a straight line Quick connect/disconnect for easy installation and removal Includes vent fitting and ports for pressure & temperature (P&T) measurements Reliable metal-to-metal sealing Benefits Revolutionary Ultipleat geometry packs a high filter area per element Smaller and more economical than most standard screen changer equipment Low operational costs Low capital costs

The housing is made of Fiberglass Reinforced Plastic (FRP) and the housings have an internal lining. The inlet and outlet ports are located at the bottom cover and have BSP threading. The design provides for easy disassembling in order to clean and change the cartridge. The housings are suitable to accommodate double open ended (DOE) and ‘O’ Ring cartridge configurations. While the housings are rated for working pressure of 10 kgcm2 and tested upto 20 kgcm2, higher pressure rated ones too can be made in case of specific requirements. Suitable for temperature ranges upto 50°C. The externals are made of anodised aluminium or stainless steel. A provision for vent and pressure gauge has been provided.

• lengths: 10" and 20"

PP Filter Housings offer the versatility to meet all of your large-capacity filtration needs, including high-flow and heavy-sediment applications. The extra large housing allows for greater cartridge capacity, reducing the number of vessels required for high flow-rate applications. Sumps are constructed of durable reinforced polypropylene and are available in both 10" and 20" lengths. These housings are available with with 34", 1" or 1�" BSP inlet and outlet ports. The 1�" internal port allows a greater volume of liquid to pass through the housing cap more rapidly.

Ours is a well-established organization based in Bangalore(India) and in proximity to valuable resources. We make available different payment options to suit the convenience level of the clients. We entertain both online and offline payment processing methods for the convenience of our customers.   Applications The Filter-In-Line series are made of a durable, reinforced Polypropylene (PP) or Styrene Acrylonitrile (PPC) or Stainless Steel (SS) and are compatible with a variety of chemicals. A smart and economic solution for a wide range of filtration requirements. Easy to install, easy to use. Standard available for 10" and 20" filter cartridges. Features Clear version to visually ensure your filter is operating at its optimal flow and capacity Blue version is built with thick walls and rugged design for increased strength and durability Leak-proof sealing with top-seated O-ring PP NTP ¾” connection: no liquid in contact with metal DOE cartridges of 63 to 73 mm diameter Max. temperature PPC and PP 52Ë�C, SS316 150Ë�C Max. pressure PPC and PP 8 bar, SS316 10 bar Materials Blue : both housing and head made out of Reinforced PP, O-ring Buna-N Clear : Styrene Acrylonitrile (SAN) housing, Reinforced PP head, O-ring Buna-N SS : SS316L for both head and housing, O-ring EPDM Options Pressure relief/bleed button Drain valve O-ring in viton GF Union connection Hose connection

• Material: MS and ABS Plastic
• Flow Rate: 220 LPM
• Max Working Pressure: 20 kg/cm2
• Maximum Temperature: 50 Degree Celsius

• Type: Pp Molded Filter Housing
• Country of Origin: India
• Material: SS

PP Housings & SS Housings Available PP Housings available in 10″ & 20″ in both Slim & Jumbo type SS Housings available in Single or Multi Cartridge arrangement as required for all sizes of cartridges

The hygienic design of the smart camera with IP 67 protection class is an option for the mvBlueGEMINI. With the new housing the mvBlueGEMINI is going to cope the challenges of the food industry.

stainless steel filter housing, Cartridge Filters, Dosing Pumps

Filter Housing, Pharmaceutical Formulation Machineries, IPC Bins

stainless steel filter housing, grease kettle, Agro Products

Bag Filter Housing, Germination Seed Paper, Spl Grade

duplex filter housings, industrial bag, Cartridge, Filter Housing