Furnace Parts Dealers in Bangalore

• Temperature: 1500-2000 Deg C
• Material: Graphite
• Density: 1.68 to 1.85 g / cm3
• Usage/Application: Industrial
• Make/Brand: Vajra
• Shore Hardness: 70 HRC

• Application: Automobile Industry
• Material: Stainless Steel
• Shape: Round
• Condition: New
• Certification: ISO 9001:2008
• Packaging Type: Carton Box
• Filtration Capacity: 20 Microns
• Type: Diesel Filter
• Warranty: 1 Year
• Country of Origin: India
• Is It Washable: Yes
• Capacity: 0.5 Litre

6" 

We are engaged in the Manufacturing and Exporting of Gas Fired Burners that are fully automatic mono block oil and gas burners. These Gas Fired Burners are developed for applications such as incinerator, boiler, furnace, etc. We offer Gas Fired Burners at affordable prices. Designed for fuels like : Light oilHSDNatural gasLPG Applications : IncineratorBoilerFurnaceOther heat applications

We provide HP, RP and UHP grade graphite electrodes best in quality and price according to your sizes.

Highly useful for hotel, hostels, caterings, choultries and other Heat processing industries.• 10 to 15% more heating capacity than other general burners.• 20 to 30% saving in lpg then other general LPG burners.• Big and small burners are available as per user's requirement.

• Pressure Range: Up to 600

The blast waves are powered from hydraulic, pneumatic, solenoid sources. The length ranges from 25-35mm and above, breadth from 16-38mm and above, height from 20-25mm and above, diameter from 13-26mm and above. The pressure range is up to 600 bar. The device is manufactured using brass.

• Sizes: 500mm to 3000mm
• Temperature: Up to 1550°C
• Pressure: Up to 600 Kpa

Effectively used to isolate the blast furnace from hot blast stove in integrated steel plants and pig iron making facilities using stoves. Also are used as a stove shut-off valve and back draughting valve. For a burner shut-off valve the same design is adopted with wedge arrangements to achieve isolation of gas lines from stoves.

Diesel fueled hot air generators are comprised of the combustion area, which is constructed from stainless steel the gas pipes and the outer casing. The exhaust gases travel through the we offer sabo diesel burner. Pipe system, over several directions before they are expelled through the smoke stack into the atmosphere. The warmed air does not come in contact with the exhaust gases but rather it circulates around the pipes and the combustion area, successfully preheating it and achieving 90% efficiency.

• Brand Name: Modtech
• Diameter: 1-2 inch
• Color: Red
• Usage/Application: Fuel Filtration
• Filter Medium Material: Metal
• Power Supply: Electric

• Usage/Application: Oven, Hot Water Boiler
• I Deal In: New Only
• Brand: CIB Unigas, Unigas
• Fuel Type: LPG/PNG/CNG
• Capacity: 550kw
• Model Name/Number: NG550
• Automation Grade: Automatic

• Power: 460 W
• Temperature range: 120 ℃ - 250 ℃
• Air volume: 0.18 m3 /min

We are offering a wide range of Oriteq Preheater, Ladle Preheater. Repid heating only 10s to reach 250 degree Built- in temperature sensor, stable output temperature Cool or hot air can be selected to preheat or cool chips The preheater can be used with rework stations to process BGA or other flake ICs.

Nirmal Energy Limited offers wide range of BALTUR Nirmal Energy Limited offers Dual Fuel Burners which are widely used on heattreat and non-ferrous melting furnaces, kilns, ovens, airheaters, dryers, chemical process equipment, and other applications where superior temperature uniformity is required. These sealed-in, nozzle-mix burners for gas and /or distillate oil are stable on stoichiometric ratio, with large amounts ofexcess air, or with up to 50% excess fuel. It's Dual Fuel burners are compatible with Gas / Light Oil and Gas / Heavy Oil.  

Airier wood pellet stoves are environmentally friendly and cost-effective. We provide Eco stoves for residential and commercial space. These are carefully designed keeping all possible difficulties in kitchen in mind. Our wood pallet stoves come with power backup to run at the time of power cut.

Straight through design No moving parts in heating chamber Fully automated sequentially controlled with PLC Thyristor with PID temperature control Carbon potential controller with proportional valve Touch screen graphic operator panel with alarm annunciation Multi point temperature recorder Silicon carbide skids or heat resistant steel T-rails Pneumatically operated doors and elevators Turnkey project offered with process know-how All alarms and annunciation with inter-locks for operational safety Options for Electric Gas fired Radiant tube heating available Easily available low cost spares Design facilitates minimum down-time for maintenance replacement Integrated and compact layout with washing, tempering and material handling equipment at economical prices

Ejects parts or operates core pulls from the stationary platen. Special modifications are available.

It is an economical alternative for providing energy to boilers, coating, heating and drying industries. It uses biomass pellets as fuel which is fully natural and renewable. It helps in saving the fuel by replacing the costly fuels like LPG, Diesel and Electricity. It can be coupled with the existing horizontal boilers with minimum retrofitting and gives the maximum benefit to the customers.

We are one of the famous company, who are manufacturer of dual block burner.

Cannery produces treatment ladles as well as pouring ladles for all applications namely Non-Ferrous metals, Iron and Steel. All these ladles are manufactured to high quality standards, generally conforming to Indian Standard Specification or higher, keeping the operational safety as the utmost priority.  SG IRON LADLE: Both Tundish and Rotary conversion ladles are available for producing SG iron by treatment / inoculation. Rotary conversion ladles uses pure magnesium for this purpose and offers an economic process of production of SG Iron. The Tundish treatment ladle is available from 500 to 2000 Kg and the Rotary conversion ladles from 500 to 1000 Kg capacities.  LIP / TEAPOT SPOUT LADLE: Both Lip pouring and Teapot spout ladles are meant for Cast Iron. Teapot Spout ladles are used to eliminate the possibility of floating slag getting in to the mould during pouring. The molten metal only from the bottom of the ladle comes through the teapot spout. Worm gear box is provided for easy tilting of the ladle while pouring. These ladles are available from 150 Kg to 16 MT capacities. BOTTOM POURING LADLE: Bottom pouring ladles are used for Steel Casting. These ladles are fitted with liver actuated pouring mechanism for easy pouring of molten metal in to the mould cavity. Tilting gear is provided for cleaning purpose. For large crane tilting non-geared ladles common detachable bail arms are provided. These ladles are available from 500 Kg to 25 MT capacities. MONORAIL TYPE ladles are equipped with trolley for monorail and hanger having rack and pinion arrangement for easy manipulation during pouring. These ladles are available from 150 Kg to 750 Kg capacities. LADLE PREHEATER: Oil or Gas Ladle pre-heaters are used for heating refractory lining of various sizes of lip-pouring and bottom-pouring ladles.  Ladle Preheaters are available in Horizontal or Vertical configuration. Preheating of the ladle refractory lining upto 1000 dec C is possible. Capacities range from 500 kg to 50 MT. Vertical Preheaters are come with a swilling hood and is preferred for newly lined ladles. Horizontally fired ladle preheaters, preferred for recycled lades are either stationary or can be moveable on a trolley with rails .

Graphite Electrodes, Graphite Blocks, Graphite Powder, Graphite Rods

heat treatment furnace burners, Burners, radiant tube burners

Graphite Electrode, graphite product, GRP Pipes, Grp Pipe

Graphite Electrode, closed tiles, Fluorspar, industries raw material, Mica

Hot Blast Valve, Miniature valves, tank valves, Steam Traps

Furnace Observation Glass

Graphite Electrodes, Crude Sunflower Oil, Rice Husk Ash, Dry fruits & Nuts