Furnaces Dealers in Bangalore

HHV has developed an argon arc melting furnace to make special materials of high purity under an inert atmosphere or vacuum. The furnace features ease of operation, dependability, versatility and affordability while offering instant high temperature and quick as well as extremely pure melts. Because of its small volume the furnace is easily purged and a high degree of purity can be maintained for each melt .

• Type: High Temperature Furnace, Vacuum Furnace
• Material: Iron, Stainless Steel
• Application: Vacuum Generation, vacuum heat teratment
• Weight: 100-1000kg
• Warranty: One Year
• Conditon: New, Used
• Country of Origin: India
• Brand Name: ALPHA
• Classification: Vacuum Furnace
• Condition: Exalent
• Temperature: 2000 degrees
• Model Number: 9552639275
• Place of Origin: india

• Condition: New
• Type: Resistance Furnace
• Max Temperature (degree Celsius): 500-1000 dc
• Brand Name: Therelek
• Reliability: High
• Application: Pre heating, annealing

• Material: Metal
• Warranty: 5yrs
• Voltage: 230V
• Type: Resistance Furnace
• Application: Industrial
• Weight: 1000-1500kg
• Uses: For Crystal Growth

Bridgeman Furnace is a Vertical Tripple Zone furnace, with 99% pure alumina tube. With 80-85mm ID tube and total length 700mm. Outer made of CR sheet Powder,coated. Temperature max. upto 1200°C. Other Sizes as per requirement. SPECIFICATION: * Dual Heating Zone of 250mm each * Cold zone in center of 50mm. * 99% pure Alumina tube of 80-85dia ID x 700mm length. * Vertical Furnace, with both sides open. * Ceramic end caps to close the tube ends as and when required* Max. Working temp. 11500C * Temperature sensors of 'S' Type thermocouples. * Outer body made of CR sheet Powder coated * Heating by Silicone Carbide heaters of suitable capacity. with all necessary clamps and fittings. * The Vertical movement of the sample is driven by a High precision motor with fine screw rod train. * The movement will be vibration free across the entire operating range * The speed can be varied from 0.1mm/min. to 10mm/min. and stroke length from 1mm to full length. * Seperate control unit with 2 independant multi-step profile temperature controllers. * Movement control by an independent controller with continuos display of speed, stroke, run time and remaining time. * Provision to integrate the entire operation through a PC (Optional)   * Operation on 440V, 3 Phase, 50Hz.only SAFETY FEATURES * It has safety features like:Home and end sensors for movement. * VAF meter to monitor voltage, current and frequency for heater life monitoring. * Automatic Heater cutoff on sensor failure * 1 Phase preventor.   * Hot or cold run option.

• Condition: New
• Warranty: 1 Year
• Type: Electric
• Material: Metal
• Use: Industrial
• Finishing: Polished

Details : Box - Used in the metal trades for hardening and annealing, the ceramic industry for firing, the glass industry for annealing and by chemical producers for processing. Air Circulation- Used much like the box type, but having the added feature of air recirculation to produce better heat uniformity in the working chamber. Salt Bath - For carburizing, hardening and tempering

• Material: Metal
• Application: Industrial
• Color: Grey
• Automatic Grade: Automatic
• Driven Type: Electric
• Applications: Annealing, Sintering, Research institutes and Labs

Heatcon Super High Temperature Furnace Up to 1800,Mufflewhich consists of super high quality alumina fiber brick with ZrO2 liner and Kanthal Super-1900 MoSi2 heating elements which can be used up to 1800degree.   Having an Operation Temperature: 1700°C (1800°C for short time), maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation. Heavy-duty double layer structure with cooling fan. Lower temperature in outside case.

• Power Source: Electric
• Type Of Furnace: Fix
• Features: Fully automatic control with PLC PID controls MMI system is also , Uniform heating through radiant tube type heater. , Easy operation and maintenance .
• Applications: Brazing
• Application: Industrial
• Melting Material: Iron
• Design Type: Customized
• Brand Name: Lehsuniya

IHVP has designed and supplied various size of Vacuum Furnaces for special applications like, Vacuum Brazing, Annealing, Hardening, Tempering, etc. meeting to the customer requirements. IHVP and Products are worldwide recognized for manufacturing and supplying superb quality Vacuum Furnaces. Our Industrial Vacuum Furnaces are made using the genuine raw material in order to meet international standards of high performance. These Pressure Vacuum Furnaces contain advanced features making them widely adaptable to cater to various requirements of customers.

We are offering heat treatment furnaces. the wide range of heat treatment furnaces manufactured and supplied by us are applied in fields like annealing, forging, hardening, preheating, quenching, homogenizing, carburizing, carbonitriding, stress relief, tempering, pelletizing etc. Heat sources offered by us in these machines are fuel based and electric heating elements. Max temp:1600'c

We are well known manufacturers and suppliers of a wide range of Gold Melting Testing furnaces. They are precision engineered by us to yield excellent performance and efficiency. They are highly cost-effective and economical as they prevent wastage of precious gold metal. We offer these induction type gold meltingtesting furnaces at reasonable prices and they are developed by us using excellent grade materials.

We are offering Dry Vacuuming We remove the equipment from the oven and place it into a vacuum chamber, which removes air and any remaining moisture. Filling We fill the chamber with resin, coating the part and filling in all the gaps and pores in the piece of equipment. Wet Vacuuming We reduce the vacuum levels and hold it for a set period of time. Pressure We increase pressure within the chamber using dry air, nitrogen, or other gases. This allows for even deeper penetration of the resin. Draining We then vent the pressure, drain the chamber of excess resin, and remove the part. Vacuum Heat Treating Furnaces and Vacuum Technology Vacuum Furnace - Vacuum Annealing Furnace - Vacuum Heat Vacuum Furnaces and Sintering Furnaces and Lab Furnaces We are committed to Provide Vacuum Heat Treatment services to customers by Meeting their quality and delivery schedules, with emphasis on continual improvement of the Quality Management System Long-term relationship to achieve

• Operation Mode: Electric
• Usage: Personal,Schools,Colleges,Ladies hostals
• Colour: Green

• Size: 34X28X20cm, 50X40X30cm, 60X50X40cm
• Type: Nylon Shopping Bags
• Brand Name: Darshna Bags
• Material: Nylon
• Shape: Ractangular
• Style: Folding
• Length: 15 Inch, 16 Inch, 17 Inch
• Weight: 250-400 Gm, 400-600 Gm, 600-900 Gm
• Color: Multicolor
• Gender: Unisex
• Pattern: Plain
• Capacity: 1kg, 5kg, 10kg, 15kg
• Width: 11 Inch, 12 Inch, 13 Inch
• Packaging Type: Plastic Packet, Plastic Bag
• Occasion: Casual
• Country of Origin: India
• Handle Type: Loop Handle
• Packaging Size: 2 Pieces, 3 Pieces, 4 Pieces
• Wash Care: Machine Wash
• Usage: Shopping Use, Household, Apperals, Package, Grocery, Gift, Promotion, Beverage
• Specialities: Eco Friendly, Easy To Carry, Durable

Reasons to Braze under Vacuum The following reasons support the use of brazing under vacuum: Calibrated use of alloy with magnesium (4045, 4044, 4104, 4004) to prevent excessive Mg sublimation in the vacuum chamber High final vacuum due to high capacity pumping systems (cryogenic pump + diffusion pumps), which produce a low oxygen atmosphere Rapid transition of the load temperature during the heating phase from 520 °C (starting temperature for Mg sublimation) to 605610 °C thanks to high power furnaces, a feature that prevents an oxidized layer (Al2O3) from reforming on the surface of the piece newly reduced to Al Suitable fixing systems of the individual heat exchanger prevent the piece from collapsing or deforming Uniform load temperature (± 3 °C at 605 °C) is achieved through accurate control of the output power and by distributing the heating zones Cleanliness of the components No emission of contaminated substances into the atmosphere Controlled cooling of the walls and other elements of the furnace with heated water (80 °C) to prevent atmospheric water vapor from condensing during loading and unloading process

We are offering MUFFLE FURNACE .

• Features: Defect free, Perfect quality, Easy to use.

We are engaged in providing the high quality stress relieving services to our esteemed clients. Our stress relieving process is widely renowned in the industry. Machining induces stresses in parts. These stresses can cause distortions in the part long term. If the parts are clamped in service, then cracking could occur. Also whole locations can change causing them to go out of tolerance. For these reasons, stress relieving is often necessary. Our team provides the stress relieving techniques as per the latest industry standards.

The Mesh Belt Conveyor Furnace has been fabricated out of top notch quality raw materials that we have procured from our trusted vendors. They are furnished with brick refractory or molded ceramic fiber insulation, that is lighter, has less thermal mass, and lower thermal conductivity than conventional brick refractory.   Application Bright hardening, low case depth carburising, bright quenching and carbonitriding Capacity (Nominal) 50 kg/hr. to 1000 kg/hr. Features Automated operation Automatic process control Consistency of results Controlled atmosphere operation Polymer quench (optional) Available in electrically operated and gas fired versions.