Globetek Jayanagar, Bangalore, Karnataka

Modes of public transport such as high-speed trains, city transit systems (metro, trams, trolleybuses�) and freight trains and also diesel electric locomotives provide the ideal solution to meet the increased demand for more mobility whilst helping to fight pollution and traffic congestion. Power electronics is essential to driving and controlling energy in these systems. LEM transducers provide control and protection signals to power converters and inverters that regulate energy to the electric motors (for propulsion) and to the auxiliaries (for air-conditioning, heating, lighting, electrical doors, ventilators etc). New requirements are continuously emerging in the railway industry, such as the demand for energy measurement, track objects monitoring and a need to constantly improve maintenance infrastructures.

These precisely controllable temperature platforms from Sigma Systems provide an open work surface with rapid heating and cooling or holding at temperature. Also known as �hot/cold plates�, they are ideal for testing or conditioning low profile items with a flat surface such as RF devices and high density power device testing (IGBTs and MOSFETs). Our flexible designs provide: Sigma Temperature Cryogenic and compressor-based refrigeration systems as low as -100°C and up to +250°C and temperature transitions up to 100°C/min Surface areas from 7 to 700 square inches (45 to 4515 square cm) and larger on request Hole patterns for your fixtures Enclosures for your DUT

Sigma Temperature Chambers are precisely temperature controllable convection ovens in which items can be placed for heating or cooling. Also known more generically as �environmental chambers�, temperature chambers are the perfect choice for testing or conditioning large or irregularly shaped items. Temperature chambers are also ideal any time a very homogeneous (low gradient) thermal environment is required.

Temptronic's ThermoStreams are portable systems that deliver clean dry air for precision temperature testing or conditioning of electronics (ICs, MEMS, transceivers, or circuits) and materials. No other systems can bring your test subjects to temperature faster with precise control With rapid thermal cycling or long saturation at a precise temperature, these systems optimize throughput for characterization, verification, thermal shock or failure analysis applications � at the test bench or on the production floor.

Today, stroboscopes are used not just to measure and observe rotation and motion, but in optical shutters for products incorporating computers and fulfill various functions in industry and in our daily lives. Sugawara's stroboscopes use xenon flashlamps developed and manufactured in­house. Drawing on the know­how accumulated over many years, Sugawara evaluates each part used in its products, including capacitors, to ensure high product reliability. Sugawara offers a wide array of stroboscopes, ranging from general­purpose portable products to larger models for use in production lines and laboratories. The flash duration provided by these products ranges from an extremely short 40 nsec to as long as 2 msec. Sugawara caters to various industries like Printing Industry, Textile Machinery, Iron and Steel Industry, Research and Development organization etc.

The Micromanipulator Company offers the semiconductor industry one of the most comprehensive range of probe stations on the market. The wide selection is designed to meet the needs of most wafer testing applications. Our quality probe stations come in Specialty, Semi-automatic, High-performance, General-purpose Manual, and Economy Manual models. In addition we have available all of the consumables, accessories and on-site support you require

LEMSYS is a leading supplier of Test Equipment and associated Services for Power Semiconductor discrete devices and modules. LEMSYS product portfolio includes test equipment for IGBT, MOSFET, Power Modules, Intelligent Power Modules (IPM), Diodes, Thyristors and GTO with their relative connecting system. Associated with the creation of the IEC 60747 standard, LEMSYS is, since 1972, the reference for dynamic and static parameter measurement of Power Semiconductors. The main goal of LEMSYS is to develop, produce and market high quality electronic measurement equipment, devoting particular attention to the customer�s total satisfaction in the manufacture of quality products. LEMSYS is a ISO 9001:2000 certified company.

Introducing the new Vitrek PA900 Precision Harmonic Power Analyzer, a refreshingly easy-to-use high performance power analyzer that won�t break your budget. The PA900 delivers multi-channel, high-accuracy, wideband performance � to tackle the toughest energy measurement applications. Trust Vitrek to deliver world class power measurement capability at a price that is surprisingly affordable. Description World Class Accuracy & Bandwidth Easy-to-Use Touchscreen Operation All the Data you need at a Price you can Afford

Small electric motors can be found in a wide range of products that help conserve energy and create comfort and convenience in our lives, including home appliances, audio and visual products, information and communications equipment, and factory automation and other industrial machinery. Small motors are gaining wide recognition as key device for achieving an eco-conscious society for the 21st century. Sugawara's torque dynamometers are widely used to create quiet, ripple-free motors. We believe motor characteristics should be measured with load control systems best-suited to the characteristics of the target motor - a concept that has earned the support of many clients.

In today�s world, efficiency of industrial applications is of increasing importance in order to save energy and money. Industrial applications are controlled by power electronics requiring optimal and accurate regulation of electronic parameters such as current, voltage and power. LEM manufactures a wide range of Industrial Transducers and it uses innovative technologies to ensure the high degree of reliability and safety that our customers require. page-2-art Key Features AC/DC, Complex, impulse current and voltage measurement with galvanic isolation. Excellent accuracy and good linearity. Low thermal drift, Very fast response time and Overload Capability. No insertion loses and compact design. PCB mountable, Panel mountable, Through-hole, ASIC, SMD and split core Transducers

Electrical Safety Testing will Never be the Same With color touch LCD & high speed DSP technology, the compact & rugged V7X sets the standard for price/performance ratio. Made in the USA to meet tough UL, CSA, TUV and IEC Hipot requirements � the V7X provides unbeatable speed, accuracy, user safety and reliability.V7X Choose from six low cost models offering AC & DC Hipot to 5KV, leakage current measurement to 100 nano-amps, Insulation Resistance to 450GΩ, Ground Bond to 30 amps and built-in switching. Combine all that with USB, RS232 and Digital I/O interfaces, plus a 2 year warranty.

The Vitrek 4700 Precision High Voltage Meter offers the highest level of measurement accuracy, yet is surprisingly easy to use. Vitrek leverages DSP technology to provide outstanding AC &DC voltage measurement accuracy, stability, repeatability and resolution. The 4700 High Voltage Meter offers performance that rivals traditional high voltage reference dividers � yet unlike the tedious divider, the 4700 provides instant, direct, high voltage measurements in a highly portable, compact and rugged bench top enclosure.

The LEM high precision product range covers transducers for nominal current measurements from 12.5 A to 25 kA while providing overall accuracies at ambient temperatures (25°C) of only a few PPM. Thermal offset drifts are extremely low from only 0.1 to 6.7PPMK. Models from 12.5 A to 60 A nominal can be used for PCB mounting, and models from 60 A to 25 kA are for panel or rack mounting with either on-board or separate electronics. In addition the Flux-gate technologies used to provide Galvanic isolation for current measurements of all types of waveforms including AC, DC, mixed signal or complex waveform. To obtain these exceptional performances, closed loop fluxgate technology has been used, coupled with a top-class current transformer. This combination enables precision current transducers having high accuracy and dynamic performance with a wide measuring range. page-6-itz-picture Key Features Precision Current transducers Extremely high linearity in current measurement No insertion loses Very high reproducibility Extremely low temperature co-efficient Unsurpassed dynamic range Very wide bandwidth High common mode rejection

We build high-performance mechanical gas chillers and chillers for cryogenic temperatures. These gas chillers provide rapid cooling and heating of dry compressed gases and liquefied gases.

FluidChill� process chillers are a family of high-reliability, portable temperature control systems for low and ultra-low process cooling. FluidChill systems provide high capacity cooling for demanding applications in industries such as automotive, energy, chemical processing, industrial, and semiconductor. In-house design capabilities including thermodynamic, mechanical, electrical, and software, and on-site manufacturing ensure that your total chiller package will perform to specifications. Chillers provide a touch screen controller, remote communications, real-time graphing, system diagnostics, and a variety of heat transfer fluids. Available in both Water-cooled and Air-cooled configurations..

Fail Safe Ohm Meters AMPTEC RESEARCH has the flexibility and engineering experience to help you define, design and produce your specific measurement as a completely integrated turnkey solution. All the AMPTEC Testers are Munition safety Board approved models. AMPTEC has designed and developed a wide range of instruments which are extensively used in the Defence organizations. The various products include Igniter Tester, Water Resistant Tester, Explosive Safety Igniter Tester, Water Resistant Fail-Safe Ohm Meter, Failsafe OhmmeterTester, Ruggedized Igniter Tester, Micro Ohmmeter, Fire & Test Set. Amptec Research designs and manufactures intrinsically-safe, explosion-proof testers for EEDs, squibs, igniters, etc. These testers are in use at major aerospace and defence labs through the country. Below are the different testers and meters manufactured by Amptec Research

There is an increasing number of process automation and condition monitoring applications where accurate measurement and precise control of electrical parameters are used in order to achieve the required level of safety, quality, reliability and operating efficiency. While measuring all kinds of AC and DC current and voltage signals, LEM current transducers and voltage transducers for automation also provide the signal conditioning to provide additional information required to ensure quick and reliable reaction. These applications are related to different end-user profiles: Machine and panel builders System integrators engineering Factory maintenance and safety services Energy service companies and facility management

Current and Voltage Transducers for energy management, process automation and control There is an increasing number of process automation and condition monitoring applications where accurate measurement and precise control of electrical parameters are used in order to achieve the required level of safety, quality, reliability and operating efficiency. While measuring all kinds of AC and DC current and voltage signals, LEM current transducers and voltage transducers for automation also provide the signal conditioning to provide additional information required to ensure quick and reliable reaction.

Then we added a 4-wire milli-ohmmeter with dynamic range up to 100K ohms and an overlapping Tera-ohm class Insulation Resistance function. Top that off with an available 40 Amp Ground Bond capability and you�re just beginning to get a feel for what the Vitrek 95X Series Hipot Testers can do for you. Description Vitrek 95X Series Hipot Testers For more than 25 years Vitrek has been driven by an obsession to build a better hipot tester. Increased user safety, faster test times, higher output voltages and more functionality have been our driving force. The 95X series is the result of this pursuit � offering power, speed, accuracy and resolution that leave the others far behind.

The Temptronic® ThermoSpot family of benchtop direct contact systems provide a temperature testing tool for integrated circuits including high-Watt emitting devices. The highly responsive unit feeds a thermal probe head through a flexible umbilical. The thermal probe is designed with an interchangeable ThermoBridgeTM to mate directly to your IC or other device under test. This creates a highly efficient thermally conductive path to quickly induce temperatures to the device, even under power.

GMC I PRO SyS Ltd design and manufacture a range of high performance AC and AC/DC current probes and clamp meters for use with multimeteres, oscilloscopes and other recording instruments. Using Rogowski and advanced Hall­Effect technologies with a patended magnetic circuit we provide a range of customised and standard distribution products. All probes give an analogue output directly proportional to the measurement current, which is compatible with a wide range of measuring instruments.

Since its inception, Saunders & Associates has delivered systems critical to the manufacture of Frequency Control Devices. They lead with technology and this strategy has positioned their products as industry standard in the areas of parameter measurement, fine tuning and testing of these devices. Below are the various type of equipment’s we supply for Quartz crystal and Oscillator manufacturing industry. Please contact us for further details on the same.

Anderon Meters are used to inspect ball bearings, while Wavimeters are used to inspect the finish of bearing parts. Previously used exclusively by bearing manufacturers, these devices are increasingly being brought in-house by those who use bearings, such as motor manufacturers, as the significance of bearing quality control gains wider recognition. Sugawara's Bearing Inspection Systems help reduce the operating noise of home appliances such as air conditioners as well as noise in automobiles. An Anderon Meter can be used to inspect delivered bearing products as well as to determine requisite bearing quality. By developing a high-performance spindle with minimal runout, Sugawara recently commercialized a revolutionary Anderon Meter capable of measuring to an accuracy within 0.1 Anderon. This enables high-accuracy measurements for quieter bearings.