Grinding Mill Dealers in Jayanagar, Bangalore

• Return loss: The return loss of Tele port and line port against 600 Ohms is 200Hz -3400Hz = 12 dB
• Insertion Loss: The tele-port to Line port insertion loss is < 1 db at 1 KHz for 600 Ohms.
• Isolation: Isolation resistance between tip, ring and between earth = 10 Mega-ohms. Isolation resistance with line port = 10 Mega-ohms.
• Delay distortion: The delay distortion caused by POTS splitter is as follows:From 0.6 -3.2 kHz delay distortion is 200 microseconds.From 0.2 - 4.0kHz delays distortion is 250 microseconds.
• Longitudinal balance of POTS splitter: The balance is greater than 58 dB for frequency between 200 Hz - 1 kHz with a straight line-level decreasing to 53 dB at 3 kHz.
• Unbalance about earth :: 25Hz-50 Hz > 40 db terminated with 600hms.50Hz- 600 Hz > 46 db terminated with 600 Ohms.600Hz-3400Hz > 52db terminated with 600ohms.
• Connectors PSTN Line: The PSTN line is the PIJF cable with 0.5 copper pairs.
• Longitudinal balance: The longitudinal balance at ATU-C and ATU-R is greater than 40 dB over the 5 kHz to 1104 kHz frequency range.•DC characteristics
• ADSL-band attenuation: The insertion loss of low-pass filter is greater than 65dB at CO POTS and 70dB in remote POTS for frequencies ranging from 25 to 300 KHz with an input level of 10dBm. For frequencies ranging from 300 kHz to 1104 kHz, the attenuation is greater than 55dB f
• ADSL-band Return Loss: The return loss caused by loading the low-pass filter in the band from 25 kHz to 1104 kHz against the reference impedance of 100 ohms is greater than 14dB.
• Metering Pulse: The metering pulse after passing through DSLAM is available at the interface with frequency 16 KHz ± 1%. The distortion is not more than 10% and the level is minimum 500 mV rms ± 10%. The interface will work independent of polarity reversal.
• Loop Current: The maximum loop current drawn from exchange is less than 60 mA.
• The ringing voltage: Generated / detected at the subscriber unit is at least 40 V rms with frequency as 25 +/ - 3Hz. The Ringing voltage is generated by the DSLAM is 75V rms with frequency as 25 + / - 3Hz
• Signal Power: Maximum peak signal power in 200-4000Hz is <3dbm. Loop current is <63mA.

The SEM Model 200 disintegrator has been evaluated by NSA and with the standard 3/32" screen, meets the requirements of NSA/CSS specification 02-02, high security disintegrators for paper and NSA/CSS 04-02, optical media destruction devices. This SEM disintegrator has been designed to accommodate materials typically not acceptable to a standard paper shredder. With thruput rates up to 100 lbs/hr., this unit is NSA approved for the destruction of all levels of classified paper documents and optical media (CDs/DVDs). With an optional 5/64" screen, the Model 200 disintegrator is also NSA/CSS 04-01 approved for punch/key tape destruction. This disintegrator also has the flexibility to destroy a variety of media (including USB thumb drive) and/or other items to privacy act (unclassified) level destruction such as: Blue Ray disks, ID badges, key access cards, microfilm, CD rom view graphs, floppy discs, audio cassettes, plastic credit cards, etc. The completely enclosed sound proofed sleek designed black and silver cabinets surrounding both the destruction chamber and the waste collection system have helped to reduce noise levels to the 72 to 78 dBa range. The 35 gallon waste collection bag system also makes the Model 200 the largest collection system in it's class helping increase productivity due to less bag changes.

Aeon Telectronics Pvt Ltd as part of its ongoing expansion has developed and added the Splitter to it product portfolio. A Splitter is a small device, which is used in the broadband network along with DSL modem at the customer premisesThe Splitter when connected to the existing phone line separate the voice signal from high-speed data, and the connection to the internet is direct. The Splitter has 1 input port where in the incoming telephone line is terminated, and 2-output port - one port is connected to the telephone instrument, and the other ports connected to the MODEM. This in turn helps the subscriber to have direct connection to the internet thus eliminating the typical delays due to busy signals connection time. It also allows the subscriber to take a voice call and browse the internet all at the same time.

• Weight: 100gm, 150gm
• Voltage: 12V, 18V
• Application: High Speed Motor
• Power: 10watt
• Power Source: Electric
• Phase: Double Phase

MTM Medium Speed Trapezium grinder is a kind of leading-world-level industrial milling machinery. It is designed by our own engineers and technical workers, basing on industrial mill research of many years and adopting world-leading-powder processing technology. Now a number of customers are fond of it for its incomparable features.Features : Technical improvement based on environmental protection concept.. High efficient and energy saving centrifugal draft fan. High density and precision impeller device. Quick adjustment and maintenance ApplicationMTM series grinding mill is widely used in electric power industry, metallurgy industry, chemical industry, building construction, coal industry, fireproofing materials making industry and some others. Materials as kaolin, gypsum, limestone and fly ash are easy ground by the machine.

• Type: Mineral Ore Powder Making
• Input Size: 20-30 mm

After many years of practice and improvement, its structure is getting perfect day by day. For low consumption, low investment, environment friendly , small occupation area, and more efficient than the traditional mill, it is widely used in the field of metallurgy, building materials, chemical industry and mining to process powder. The series is used in grinding the non-flammable and non-explosive stuff which has the Moh’s hardness below 7, humidity less than 6%, such as gypsum, talc, calcite, limestone, marble, feldspar, barite, dolomite, granite, kaolin, bentonite, bauxite, iron ore etc., the final products change from 613 micron to 44 micron. Through the function of separator and blower, it can meet different customers’ demand. Features 1. The whole plant is a vertical structure of strong systematic characteristic, so it occupies small area. From crushing of raw material to grinding and packing is an independent production system.2. Compared with other milling plants, its passing ratio achieves 99%, this is what other mill can not reach.3. Driving system of main frame adopts airtight gearing and pulley, drives smoothly and operates reliably.4. Main parts of the whole plant are made from cast and steel of high quality. The technics is so subtly that insures the durability of whole plant.5. The electric control system is centralized controlled, so the automaticity is high, no people are needed in the operating room. Working Principle Firstly, raw material is crushed by jaw crusher to the size required, then the crushed materials are elevated into a hopper from which the material is transported through the electro-magnetic vibrating feeder, evenly and continuously into the grinding chamber for powder-processing. The rollers oscillate outward to press the ring because of the centrifugal force and the shovel scoops up the materials, send to the middle between ring and roller to accomplish the grind. After this, the ground stuff are carried by the air from the blower into the separator for screening. The fine powers are blow into the cyclone collector and are poured out through the output-powder valve as the final products and the rough stuff after the screening will be recycled back into the grinding chamber for regrinding. The set’s airflow system is closely sealed up and circulated under condition of negative and positive pressure. Processed Materials : Limestone, calcite, barite, dolomite, potassium feldspar, marble, talcum, gypsum, kaolin, bentonite, medical stone, rock phosphate, manganese ore, iron ore, quartz, active carbon, carbon black, ceramic, coal, etc. . Applications : Cement, coal, power plant desulfurization, metallurgy, chemical industry, non-metallic mineral, construction material, ceramics.

• Categories: Office Automation, POE, Powerline, Splitter/Injectors Etc.

Used to install a non-PoE device in remote locations Splits a networked PoE signal into separate power and Gigabit data sources Set the output power to either 5V, 7.5V, 9V, or 12V

These are several classes of devices that can be used to divide (or) combine RF and microwave power. Generally, they are classified according to the number of output ports and the relative phase difference between the output signals. The Power Splitter is an appropriate device carefully selected based on the device type and specifications. Moreover, we are listed amidst the well-reputed Power Cord Splitter Exporters and Suppliers in India. Particular care must be taken in specifying DC Power Splitter where the application calls for power combining. When specifying a power splitter, the system designer must consider key parameters namely, frequency range, number of outputs, amplitude balance, phase balance, isolation internal power dissipations. Devices Types These devices deliver output signal in – phase with each other. The most common types are 2, 4, 6, 8 and 16 way dividers. Odd – numbered power division circuits, by design, have a narrower bandwidth. The following table Contains number of output and corresponding coupling loss.

• Type: Plc Splitters
• Material: Frp, Plastic, Resin, Rubber, Silicone Rubber
• Certification: CE Certified, ISI Certified
• Application: Automotive Industry, Electricals, Electronic Device, Home, Offices, Wire
• Color: Brown, Creamy, Dark Brown, Grey, Ivory, Light Grey, Off White, White
• Condition: New
• Frequency: 50Hz, 60Hz
• Feature: Easy To Connect, Electrical Porcelain, Four Times Stronger, Proper Working, Shocked Proof, Sturdy Construction, Superior Finish, Water Proof
• Warranty: 1year
• Spliting Style: Double, Multiple, Tripple

• Weight: 86 kg
• Drive power: 750 W
• Power connection: 1-phase

Power Splitter, antenna splitter

Optical Fibre Splitters, Wdm Couplers, Polishing Films And Consumables

Hdmi Splitter, Usb Cable Converter, USB OTG Cable, X-Box Gaming Adapter