Heating Furnace Dealers in Bangalore

• Condition: New
• Brand Name: Therelek
• Type: Arc Furnace
• Usage: Melting Furnace
• Power (KW): Customized

• Temperature :: 1300 degree C (±5 degree C)
• Pressure :: 2 bar (A)
• Ultimate vacuum :: 10 -5 m.bar

The Advanced Horizontal Vacuum Furnace used for rotary Brazing applications. The operating temperature is 1300 degree C.

• Power Source: Electric
• Type Of Furnace: Fix
• Features: Fully automatic control with PLC PID controls MMI system is also , Uniform heating through radiant tube type heater. , Easy operation and maintenance .
• Applications: Brazing
• Application: Industrial
• Melting Material: Iron
• Design Type: Customized
• Brand Name: Lehsuniya

• Voltage: 240-380 V
• Material Loading Capacity: 500-1500 kg
• Max Temperature (degree Celsius): 0-500
• Brand Name: IHVP
• Frequency: 60-80 Hz

We are offering heat treatment furnaces. the wide range of heat treatment furnaces manufactured and supplied by us are applied in fields like annealing, forging, hardening, preheating, quenching, homogenizing, carburizing, carbonitriding, stress relief, tempering, pelletizing etc. Heat sources offered by us in these machines are fuel based and electric heating elements. Max temp:1600'c

• Rated Power: 3 KW
• Melting Material: Gold
• Max Temperature : 1200 deg

Reasons to Braze under Vacuum The following reasons support the use of brazing under vacuum: Calibrated use of alloy with magnesium (4045, 4044, 4104, 4004) to prevent excessive Mg sublimation in the vacuum chamber High final vacuum due to high capacity pumping systems (cryogenic pump + diffusion pumps), which produce a low oxygen atmosphere Rapid transition of the load temperature during the heating phase from 520 °C (starting temperature for Mg sublimation) to 605610 °C thanks to high power furnaces, a feature that prevents an oxidized layer (Al2O3) from reforming on the surface of the piece newly reduced to Al Suitable fixing systems of the individual heat exchanger prevent the piece from collapsing or deforming Uniform load temperature (± 3 °C at 605 °C) is achieved through accurate control of the output power and by distributing the heating zones Cleanliness of the components No emission of contaminated substances into the atmosphere Controlled cooling of the walls and other elements of the furnace with heated water (80 °C) to prevent atmospheric water vapor from condensing during loading and unloading process

• Features: Quality product , Highly reliable , Extensively used .

The Mesh Belt Conveyor Furnace has been fabricated out of top notch quality raw materials that we have procured from our trusted vendors. They are furnished with brick refractory or molded ceramic fiber insulation, that is lighter, has less thermal mass, and lower thermal conductivity than conventional brick refractory.   Range Solutionising (precipitation) with rapid water quench facility as per Aerospace requirment. Ageing Gas/ LDO/ electrically heated, Melting and holding furnaces (including tower melting).

Finding application in ferrite sintering applications, Sintering Furnace offered can work with maximum temperatures of 1300oC and perfectly supports sintering process involving formation of solid material mass through heat without melting the material to point of liquification.

• Temperature Range: 800°C to 1800°C

Therelek’s standard pusher type continuous furnace operate up to 1800°C.Higher temperature requirements are also encouraged which require process specific design. A multi-zone control environment is present in continuous high temperature furnaces, often with a single pre-heating zone, followed by multiple heating zones and then cooling zones before exit. Due to the high temperatures involved most of these furnaces operate under controlled and protective atmospheres, with inert gases such as nitrogen and argon used for initial purging, and gas mixtures or gases like cracked ammonia or hydrogen or endogas used to create a suitable atmosphere as per process parameters.

Hightemp-Dowa is an acknowledged leader in Pusher Furnace technology, enabling us to incorporate state-of-the-art facilities in Pusher Furnaces – such as full automatics, pick-and-place robot systems and SCADA. Continuous Gas Carburisers Furnaces are endowed with a single track continuous gas carburising design – enabling consistent production at low operating costs. What’s more, a combination of the latest in sophisticated controls, including data acquisition systems, ensures high quality heat treatment. Features Production capacity 150kghr to 400kghr Operating temperature up to 950oC Sophisticated controls including SCADA & Data Acquisition can be offered Option for Endothermic gas or Nitrogen-Methanol system as atmosphere Option for Gas fired or Electric heating with Radiant tubes Fully automatic, PLC controlled closed loop system Robotic charge handling system for Press Quenching can be offered Ability to process large numbers of different components Modular designs for flexibility and ease of maintenance Silicon carbide skid rails for smooth long lasting movement of charge Pneumatically operated door systems for positive sealing Pusher mechanism designed for heavy loads Automatic adjustment of stroke length to compensate for thermal expansion Guiding of quenching oil throughout the charge with baffles located inside the quench tank

Furnaces for die casting machines are manufactured by Silcarb. These Furnaces can be used for both melting and holding Aluminum. Various combinations of heat sources are used, the preferred heat source combination for melting is fuel fired and holding being electric. This combination gives the best results in terms of burning losses, fuel efficiency and temperature accuracy. Output ranging from 150kgs per hour up to 1500 kgs per hour are manufactured by Silcarb.

We manufacture fully automatic, semi automatic, manual mesh belt type continuous annealing furnace. We have also successfully exported similar equipment to usa

The single zone, high temperature, bottom loading furnace is capable of operating at temperatures up to 1650oC in air. The furnace utilizes 1800oC molydisilicide heating elements positioned on three sides of the internal chamber. The furnace utilizes an energy efficient insulation package consisting of graded ceramic-fiber, high temperature insulation. It is an ideal tool for materials annealing and sintering.

SKR manufactures extremely fuel efficient noise free Gas fired furnaces for Aluminium melting. Feature of Gas-fired Melting Furnaces Manual And Hydraulic Options. Customized To Suit Any Fuel Oil Or Gas. Low Gas Consumption. Smooth, Jerkless Tilting Operation. Clean Surroundings. Long Crucible Life. Long Refractory Life.

• Power Source: Electric
• Melting Material: SS, Copper
• Material Loading Capacity (T): 1500-3000 Kg
• Max OperatingTemperature: 1200 Deg C
• Automation Grade: Automatic

• Output ranging: 150kgs per hour up to 1500 kgs

Tower Melting Cum Holding Furnaces These Furnaces can be used for both melting and holding Aluminum. Various combinations of heat sources are used, the preferred heat source combination for melting is fuel fired and holding being electric. This combination gives the best results in terms of burning losses, fuel efficiency and temperature accuracy.

• Temperature Range: 500°C to 700°C (for Aluminium Alloys)

The furnace is inverted type with charge lifting and lowering facility to accommodate the high speed quenching including de-clamping, door opening and quenching. The furnace can be stand alone type with charge carrier loader and quenching tank moving on the floor or floor mounted with charge carrier loader and quench tanks sliding in a pit.

Nitriding furnace of Heat Treatment Machines and supplying Nitriding Furnaces. Beginning with the development of a range of gas nitriding technologies we have broadened our scope of activity beyond gas nitriding to include other heat treating processes and product lines.

Backed with a team of professionals and experts, we are into offering Tempering Furnaces in the industry. These Tempering Furnaces that we offer are manufactured from highly corrosion resistant materials. Further, these Tempering Furnaces are highly energy efficient in nature. Features: Smooth performance Longer operational life Require less maintenance

• Stainless Steels: SS420, Stavax(ESR),Mirrax etc

It is a heat treatment wherein a material is altered, causing changes in its properties such as strength and hardness. It is a process that produces conditions by heating to above the re-crystallization temperature and maintaining a suitable temperature, and then cooling. Annealing is used to induce ductility, soften material, relieve internal stresses, refine the structure by making it homogeneous, and improve cold working properties. Machining induces stresses in parts. The bigger and more complex the part, the more the stresses. These stresses can cause distortions in the part long term. If the parts are clamped in service, then cracking could occur. Also hole locations can change causing them to go out of tolerance. For these reasons, stress relieving is often necessary. Tempering is a process done subsequent to quench hardening. Quench-hardened parts are often too brittle. This brittleness is caused by a predominance of Martensite. This brittleness is removed by tempering. Tempering results in a desired combination of hardness, ductility, toughness, strength, and structural stability. Tempering is done immediately after quench hardening. When the steel cools to about 40 ºC (104 ºF) after quenching, it is ready to be tempered. The part is reheated to a temperature of 150 to 400 ºC (302 to 752 ºF).

Vacuum Theat treatment furnace manufacturers in India. Since its inception, Triad has been delivering high quality thermal processing equipment for customers. At Triad Engineers, we believe that innovative products and constant improvisation of the existing products. We do this by adding new features and pave a straight path for success and growth. Triad achieves this by partnering with other world leading heat treatment equipment providers.

Production capacity 150kghr to 400kghr Operating temperature up to 950oC Sophisticated controls including SCADA & Data Acquisition can be offered Option for Endothermic gas or Nitrogen-Methanol system as atmosphere Option for Gas fired or Electric heating with Radiant tubes Fully automatic, PLC controlled closed loop system Robotic charge handling system for Press Quenching can be offered Ability to process large numbers of different components Modular designs for flexibility and ease of maintenance Silicon carbide skid rails for smooth long lasting movement of charge Pneumatically operated door systems for positive sealing Pusher mechanism designed for heavy loads Automatic adjustment of stroke length to compensate for thermal expansion

Granulated Blast Furnace Slag is obtained by rapidly chilling (quenching) the molten ash from the furnace with the help of water. During this process, the slag gets fragmented and transformed into amorphous granules (glass), meeting the requirement of IS 12089:1987 (manufacturing specification for granulated slag used in Portland Slag Cement). The granulated slag is ground to desired fineness for producing GGBS. The chemical composition of JSW’s GGBS contributes to the production of superior cement. Over the period of time, its load-bearing properties continue to increase as it absorbs surplus lime released during hydration to form more calcium silicate hydrates. These hydrates add to the strength of the cement.

• Brand Name: biobase
• Warranty: 1 year
• After-Sales Service Provided: yes
• Place of Origin: china

1. Imported high density ceramic fiber. 2. PID two digital screen controller or programmable controller as requirement. 3. Controller has the function of timing and over-temperature protection. 4. Dual Ceramic Inner Chamber, hollow heat insulation and good ventilation ensure that outer shell is not hot and the inner shell can cool down quickly 5. Equipped cooling fun ensure the cooling rate up to 5℃min Note:3~5 is only for SX4 series

• Brand Name: Iron Tech
• Material Loading Capacity: 500-1500 kg
• Max Temperature (degree Celsius): 1500-2000 Degree Celsius

Single track continuous gas carburising design offers consistent production at low operating costs. Newest range of sophisticated controls including data acquisition systems ensure high quality heat treatment. These furnaces are available from various capacities ranging from 125-600 Kgs per hour. The lines offered include burn off, pre-heating, main carburising chamber, optional inter cooling chamber, reheating quench tank, post wash, tempering and associated material handling equipment         These furnaces are also available with Endo gas and Nitrogen- Methanol system, as also with gas fired/electric heating.

• Voltage: 3 PH, 415 V, 50 HZ
• Country of Origin: Made in India
• Material Loading Capacity (T): 100 KG/ HR
• Power Source: Electric
• Type Of Furnace: Fix
• Rated Power (KW): 60 KVA
• Input Voltage (V): 3 PH, 415 V, 50 HZ

• Features: Fully checked, Unique range, Highly efficient
• Item Code: TF-001