High Voltage Circuit Breaker Dealers in Bangalore

• Warranty: 2years
• Product Range: 9kV to 216kV
• Nominal Discharge Current: 10kA to 20kA
• Line Discharge Class: 1,2,3
• Frequency: 50Hz
• Applicable Standard: IEC 60099 part4 & IS 3070 Part3

• Type: Short Circuit Isolator Module
• Condition: New
• Country of Origin: Made In Italy
• Model No: TC811E1023
• Brand Name: Honeywell
• Operating Voltage Range: 15 to 30VDC
• Maximum Standby Current: 200µA at 24VDC
• Isolation Current: 15 mA
• Operating Temperature: -20°C to 60°C

short circuit isolator module operating voltage range     :-   15 to 30vdc (min 17.5vdc to ensure led operation) maximum standby current  :-  200µa at 24vdc isolation current                       :- 15 ma operating temperature         :-  -20°c to 60°c humidity                                       :-  5% to 95% relative humidity module dimensions                 :- 93mm(h) x 94mm(w) x 23mm(d) (including terminal blocks) surface mount box dimensions   :-    132mm(h) x 137mm(w) x 40mm(d) weight (module only)                     :-  62g weight (module in m200e-smb)  :- 200g maximum wire gauge                      :-  2.5mm²

Load Break Switch 630A, 26.3KA, triple pole, spring assisted hand operated type with quick break contacts. With earth - switch and interlock, as per IS-9920, IEC265. HT HRC fuses of suitable rating (Access to the HT Fuse chamber is possible only after switching OFF the LBS) Sealing Facility Provided as per EB norms Since these panels are installed outdoor, these are developed to be sturdy and resistant to varying ranges of temperature, which confirms to IP55 asper IS/IEC 60947-1-2004.

We offer a wide range of 11kv Single Brake AB Switches that are widely used for providing excellent performance in a particular circuit. These 11kv Single Brake AB Switches are easy-to-install and compatible with numerous devices. We make available bulk quantities of these 11kv Single Brake AB Switches at nominal price.

• Application: Protection, Isolation
• Input Voltage: 5V

The rs 232 serial port isolator � iso 232 m is primarily intended to provide complete isolation between expensive computer or system from the serial device, so that they are protected against any inadvertent damage due to electrical disturbances. The iso 232 m also provides necessary immunity to a computer or a system against electrical noise and differential ground. Iso 232 m is available as a compact unit enclosed in a plastic casing, which takes power from the supplied power adaptor. The converter is populated with surface mount components for good reliability and to reduce the size. At the same time, it is equipped with good and reliable isolation to data signals and protection to serial port from high voltage (2500 v)

Product Features: The  panel consists of Load Break Switches with earth switches for the operating mode.  Load Break switch with Fuse Tripping Mechanism for switch ON & OFF Transformers.  Load Break Switches are Powder Coated with 60-120 microns for its inner / outer texture with High Quality processes  The type tests conducted by us in CPRI Bangalore is as follows Lightning Impulse & Power Frequency voltage Withstand Test (DRY). IEC62271-200/2003 LI 75kV (Peak) & PF 28kV  Ingress Protection Test IP 55 as per IEC 60529 Category-1  

Micronova offers ABB complete solution for 12/24 kV distribution networks. This consists of SafeRing a Ring Main Unit (RMU) that can be supplied in various configurations and SafePlus, a compact switchgear with unique flexibility.   SafeRing/SafePlus are delivered as a completely sealed system with a stainless steel tank containing all the live parts and the switching equipment. Constant atmospheric conditions in the sealed tank ensures a high level of reliability, safety and a virtually maintenance free system. Key Features Compact and robust design High flexibility Minimal moving parts Multiple configuration options Virtually maintenance free Enhanced safety High degree of functionality with integrated features Complete solutions including applications for remote control and monitoring

We are offering static synchronous compensator, statcom can be considered a voltage source behind a reactance. Physically, it is built as a three-level inverter operating at constant direct current (dc) voltage. It generates and absorbs reactive power by electronically processing voltage and current waveforms in a voltage source converter (the grid views it as a synchronous machine without inertia). As a result, capacitor banks and shunt reactors are not needed for statcom to generate and absorb reactive power, which enables a compact design and small footprint. The high switching frequency of the igbts provides extremely fast control, and is particularly useful in applications such as mitigating the voltage flicker created by electric arc furnaces, voltage balancing, harmonic filtering and grid voltage recovery.

• Usage/Application: Signal Isolation
• Brand Name: PR ELECTRONICS
• Input Voltage: 16.8-31.2 VDC
• Mounting Type: Horizontal
• Output Voltage: 16.8-31.2 VDC
• Temperature: UPTO 70 DEGC

The 11/12 kv Switching Panel with LBS is suitable for Indoor & Outdoor applications. The Switching Panel consists of a Load Break Switch that can be used for Switching ON & OFF of the transformer. The HRC Fuses used conforms to IS Standards. The Protection / Tripping System is implemented through fuses (Striker pin) & relays and assembled with suitable bus bars. The Panel is Powder Coated with 80-120 microns for its Inner /outer texture with High Quality Process. The Type Tests conducted by us in CPRI Bangalore (Ref. Nos) is as follows (As per IEC & IS Standards): Short Circuit :SC15S0692 (26.3KA rms for 1 Sec) High Voltage : HVML2014S0660 (12/28/75KV) Temperature Rise :SC15S06 (at 630 Amps) IP 55 : EATDHVLM2014s0660 (Category 2) Application: They are used in Residential / Commercial/Large & Small Industrial Uses.

The Lightning Protectors, we manufacture offer excellent protection and excellent RF performance to ensure the security of the whole system (antenna, cable connections and base station). These protectors also safeguard against over-voltage damage and effective lightning. The lightning protectors are perfect for frequency ranging from 800 to 2500MHz and are available in N and 7/16 DIN type interfaces configured for either the antenna side or RxTx (protected) installations. Two different functional types of our lighting protectors are available: •    Wideband lighting protectors are available:•    Applications for a broad frequency range from 800 to 2500 MHz•    Gas -capsule lighting protectors•    Applications from DC to 2500 MHz with replaceable gas discharge capsules

• Type: Belt Sway Switch
• Material: Metal
• Application: Conveyor
• Feature: Durable, Easy To Use, Long Life, Rust Proof
• Voltage: 240 V
• Condition: New
• Frequency: 50-60 Hz
• Power Source: Electric

  Being counted among the well acclaimed organizations of the industry, we are into offering Signal Isolators. These Signal Isolators offered by us are extensively demanded in the industry for their efficient working. Moreover, these Signal Isolators have long service life. Features: Low maintenance High in quality Cost effective

Maintenance free design, Horizontal drawout and isolation, Interlocks to prevent insertionwithdrawal of closed CB, Identically rated CBs are fully interchangable, Fully type tested as per IEC60056IS 13118IEC 62271-100, Spring Charging Motor Voltage:230V AC, 110V DC, 220V DC.

• Current Rating: 13A
• Brand Name: TIMEGUARD
• Voltage Rating VAC: 230V
• Tripping Current: 30mA
• Trip Time: 40ms
• Outlet Type: UK
• Product Range: Valiance+ Series
• Part Number: RCD16MLN

We offer highly credible and wide range of 33/132/220 KV Ring Main Unit, this is user-friendly product is easy to operate, reliable and has compact design.We offer our clients wide range of ring main unit (RMU) that are used for H.T.side. Our range is offered with 3 numbers of switches (Circuit Breakers or Isolators or LBS). These are widely used for two inputs with mechanical or electrical interlock and also provided with one outgoing to ensure heavy load bearing capacity. Further our range can also be offered with one input with two outgoings. These are also used for redundancy feeder purposes.

Static var compensator is one of the valuable applications for power electronics technology. For ac power transmission and distribution system, various types of static reactive power compensator have been proposed. Shunt compensation is widely used to improve power factor and voltage stability. A static synchronous compensator (STATCOM) based on voltage source converter (VSC) can be said to be the most advanced shunt-type reactive power compensator. In contrast with thyristor-based reactive power compensators,

• Usage/Application: Signal Isolation
• Brand Name: Surya Insts
• Input Voltage: 0-300 mV
• Mounting Type: DIN RAIL
• Output Voltage: 24 VDC Pulses

• Frame: Blade,Shaft,Paint Finish

Safety and reliability have been a challenge in today�s coal fired boilers at thermal power stations. FOURESS, in technical consultation with a few discerning customers have developed the perfect solution to the pressing problem of effective isolation of PF mills. This has been done with the ingenious concept of TWIN SEAL FLAP (TSF) Isolator, which guarantees 100% sealing efficiency for safe access to on-load maintenance of PF mills. Majority of the coal fired boilers in India use guillotine gates as Isolating equipment for PF mills. This technology has become out dated owing to its ill-equipped provisions. As such, Maintenance Engineers on the site face a host of problems, some of which are as follows : Existing guillotine gates do not use an effective sealing system. This results in leakage of gas to the downstream. High velocity coal laden gas further aggravates the leakage making it virtually impossible for maintenance personnel to take up on-load maintenance. Thus an additional blanking plate becomes essential. The entire operational area gets polluted due to transit leakage during operation of the guillotine gate. There is frequent failure of cylinder seals owing to heat radiation during operation. Guillotine gates often get jammed because of high temperature (warping), mainly due to narrow guides and improver bearings. To put an end to these crippling problems, FOURESS devised a simple product called TWIN SEAL FLAP (TSF), which provides the precise solution to the above mentioned drawbacks in guillotine gates The perfect Isolator, TWIN SEAL FLAP has provided its efficacy, ever since its first installation at Koradi Thermal Power Station in 1982 and subsequent installations of over a 100 units in a number of Thermal Power Stations in India.