Hitachi Koki India Limited Peenya, Bangalore, Karnataka

Scrap guide protects operators hand from cut-off strips Easily replaceable blades have 8 cutting edges each

Weight : 1.7kg (3.7 lbs.)

Variable nozzle (Direct injectionwide angle) adoption which can adjust pressure Washing of the wide range is possible by long pressure hose High-Pressure Hose Length : 10m Large pressure hose reel adoption with convenient storage Vertical type for easy storage Lightweight compact design for easy use Built-in thermal protector Rotary ONOFF switch for convenient use With wheels and handle for easy movement With siphon function

Power Input : 2,000W

Washing of the wide range is possible by long pressure hose High-Pressure Hose Length : 10m Vertical type for easy storage Built-in thermal protector With wheels and handle for easy movement Rotary ONOFF switch for convenient use With siphon function Lightweight compact design for easy use

Light weight and compact Single sequential actuation and "contact actuation" nailing change mechanism For wire collated nails Easy top loading pop-out magazine Tool-less adjustment in driving depth Comfortable soft trigger covered with double-molded elastomer Rubber grip Specifications

Power Input : 1,400W

Downward cutting allows for cutting of trapezoidal metal plate 3 Positive stop die holder allows for straight, right and left cutting

Power Input : 400W

Overall Length : 250mm (9-7/8

Capacity: Max Stirrer Dia. 120mm (4-34") Power Input 1,100W Tool Spindle Thread M14 No Load Speed: High 300 - 650min. No Load Speed: Low 150 - 300min. Overall Length 325mm Weight 5.4kg (11.9lbs.) Standard Accessories Stirrer, Carbon Brushes, Wrenches

LCD display for showing temperature and wind power settings Continuous adjustable temperature and variable air flow for different applications Constant Heat Control for continuous work without overheating High stability for stationary use Soft grip handle for more control and comfort

Voltage : 110V, 120V - 127V, 220V - 240V

Power Input : 1,375W, 1,500W, 2,000W

2 Heat Settings Cool air shot for quick cooling down Hanging hook for easy storage and stationary use Overheating protection Soft grip handle for more control and comfort

Voltage : 110V, 120V - 127V, 220V - 240V

Power Input : 1,375W, 1,500W, 2,000W

Capacity Air Vacuum - 22kPa Capacity Air Volume Flow - 3.5m3min Tank Material - Resin, Effective Dust Volume - Dry - 15L, Wet - 12L Tank Material - Stainless Stell, Effective Dust Volume - Dry - 25L, Wet - 22L Tank Material - Stainless Stell, Effective Dust Volume - Dry - 35L, Wet - 30L Power Input 1,140W Insulation Grounded Interlocking Electric Outlet 100 to 2,400W (100 to 1,700W for UK100 to 1,200W for Australia) Dimensions (W x D x H) 390mm x 469mm x 550mm - (15-38" x 18-1532" x 21-2132") Weight 9.4kg (20.7lbs.)

Variable Speed (12 Speed sections) Depth adjustment gauge for accurate drilling of repetitive depth holes Durable cast iron table surface tilts 45° left or right Quick belt tension releasing knob for fast speed setting Built in light Patented X-Y laser guide that enables rapid and accurate pre alignment of drilling location Keyed onoff switch for optimum safety

Display with back light for ease to see in dark areas Side measure button easy to push in narrow spaces Battery level indicator: Four-stage display Five measuring modes: distance, continuous, area, volume and side Compact and lightweight at 0.14kg

Power Source : Power Source

The pressure regulator (regulates pressure exhaust air from 0 to 8 bar). Two pressure gauge - one shows the pressure inside, and another - on the outside compressor. Universal socket outlet. 2 solid rubber wheels for easy transport. Cast iron cylinder - a long life. Automatic protection against overload.

Power Input : 1.5 hp

Weight : Weight

Innovative design Stands alone Dust Bag as standard accessory for dust extraction Variable speed by trigger and dial Powerful blow and Air Volume Flow 3.8m3min. Soft grip handle

Power Input : 550W

Pivoting Sub-Fence as an optional Head swivel system adjusts 48° left for bevel, and compound cuts both 45° bevel to left, and 45° miter to leftright Rigid die cast base with turn table LASER guide to locate on cut line LED job light Lightweight 14.5kg Slide guided rigidly by dual linear ball bearing, for superior and tough job Max cut capacity heigh 65mm x width 312mm at 0° cross cut. Powerful input 1,050W and no-load speed 5,500min Soft grip handle Positive miter stops;0°, 15°, 22.5°, 31.6°, and 45°(RL) Equipped with chip deflecto

High cutting speed with Heavy-duty Motor Straight cutting action Quick blade change by lever Blade mount reversible to cut upward or downward Large switch to operate in upside-down Double-molded front cover for comfort gripping Variable speed Dust- and water-resistant triple-sealing constructio Newly-designed front cover and handle to hold

Weight : 3.3kg (7.3 lbs.)

Variable speed by dial and trigger Large soft grip for comfortable operation Motor with two ball-bearings for longer life and efficient power transmission Compact and lightweight 1.5kg Dust blowing for clear view over cut line Connectable directly with a dust collector without adapter

Variable speed by dial Toolless blade change by lever A new orbital locus and balance design for smooth cutting Powerful input 705W motor 3-mode orbital action Durable aluminum side cover Soft grip handle.

Capacity Wood - 160mm (6-1964") Capacity Aluminium - 20mm (2532") Capacity Mild steel - 10mm (2564") Capacity Min Cutting Radius - 25mm (1") Power Input 800W Length of Stroke 26mm (1-132") No Load Speed (stroke) 800 - 2,800min Overall Length 249mm (9-5164") Weight*1 2.5kg (5.5lbs.) Vibration Total Values - (triax vector sum)*2 Cutting wood - Vibration emission value : ah, B = 8.0ms2, Uncertainty K = 1.5ms2

Digital display to indicate angles of miter and bevel Blade Dia 305mm Laser Marker: Guide system on cut line Laser guide system Thumb actuated positive miter stops for auick and easy adjustment Equipped with chip deflector Pivoting Sub-Fence for supporting large stock Soft Grip Large table

Laser Marker: Guide system on cut line Laser guide system Thumb actuated positive miter stops for auick and easy adjustment Soft Grip Large table Equipped with chip deflector Pivoting Sub-Fence for supporting large stock Aggressive tool design Blade Dia 305mm

Lightweight 11.9kg Thumb actuated positive miter stops for auick and easy adjustment Soft Grip Large table Aggressive tool design Equipped with chip deflector Pivoting Sub-Fence for supporting large stock

Dimension : 460 x 628 x 561mm - (18-1/8 x 24-3/4 x 22-3/32")

Weight : 11.9kg (26.2 lbs.)

Capacity Blade Dia. - 235mm (9-14") Capacity Max Cut Depth 90° - 86mm (3-38”) Capacity Max Cut Depth 45° - 65mm (2-916”) Power Input*1 2,000W - (110V:1,670W,127V:1,800W) No Load Speed 5,200min Overall Length 397mm (15-58”) Weight*2 7.0kg (15.4lbs.) Standard Accessories Blade, Side Handle, Guide, Bolt, Wrench, Adapter for Dust Collector, Short Lever

For 190mm (7-12") Blade Complied for CE, Europian standard Side handle easy to grip Backward dust emission Compact and lightweight 3.4kg Rigid aluminum base for fine cut

Powerful 1710W motor for increased cutting ability Die-cast aluminium base with scale for sturdy, accurate and fine cuts Anti-slip handle and large front grip for excellent control Lightweight with magnesium alloy for gear cover, blade cover and lower guard Easy access adjustable for 55° bevel capacity for wider application range