Industrial Bearing Dealers in Mg Road, Bangalore

Tilted pad thrust bearings are used in rotating machineries with high thrust loading. The thrust load is transferred from a sliding part to a stationary part through hydrodynamic oil films. The tilted pad thrust bearing consists of a series of flat surfaces sliding over stationary tilted pads. The space between the flat surface and the tilted pad is filled by a lubricant that is drawn in due to the sliding motion of the flat surface. The pressure developed in the lubricant in between the sliding surface and the tilted pad counteracts the external load applied to the sliding surface and thus prevents contact between the two surfaces. Integration of the pressure values on the surface of the tilted pad gives the total load on the tilted pad. This total load is used to analyze elastic deformation of the tilted pad. In this model, Reynolds equation is used to calculate the pressure in the film and structural analysis is performed to find the elastic deformation of the tilted pad.

• Outside Diameter: 1500 mm
• Type: Wire race ball bearing
• Bore Size: 175 mm

ROLLON manufacturers Special Spherical Bearings for Nuclear Power Plants. The co-efficient of friction of these Special Spherical Bearings shall be below 0.1µ and the working temperature up to 600° C. ROLLON Special Spherical Bearings are used for supporting the Steam Generator Guide supports at Steam nozzle location in Nuclear Power Plants. These special bearings support steam nozzle against loads during normal operating conditions, earthquake and / or pipe rupture events. The Special Spherical Bearings are manufactured with housing in stainless steel and a spherical ball in special alloy bronze fixed with solid lubricant. This arrangement permits free diametrical expansion of steam nozzle, free vertical upward thermal expansion and tilting of Steam Generator and to transfer the loads from Steam generator to supporting structure.   ADVANTAGES The solid lubricant used has very low co-efficient of friction, less than 0.1µ. The solid lubricant is suitable for high operating temperature, 600° C. Bearing is suitable for maximum load of 34 N/mm². Chemicals & weather has no effect on the solid lubricant. The Special Spherical Bearings are manufactured to meet the stringent quality requirement of M/s. Nuclear Power Corporation of India. Bearings have been designed and tested for loads up to 375 MT without any failure or defects. ROLLON also manufacturers in their state of the art manufacturing facility at Bangalore Sliding Bearing Pads. ROLLON Sliding Bearing Pads are used for Primary Heat Transfer system in a Nuclear Power Plant to eliminate damage at the supporting structure due to thermal expansion. ROLLON Bearing pads permit unrestricted movement due to temperature changes or any other external forces at the free end.

Spherical roller bearings are self-aligning bearings designed for heavy radial loading. They automatically compensate for large angular errors (shaft misalignme....

Bearings, Inner Rings

Needle Thrust Bearings

Stainless Steel Ball

Bearings

linear guideways, ball bearing, Lead Screws, Linear Bearings

Bearings, wind energy generators blades, wind energy generation services

Ball Bearings, Industrial Bearings

Bearings