Industrial Furnace Dealers in Malleswaram, Bangalore

Our state-of-the-art Aluminium Melting Furnaces are used for various applications. They are designed using quality grade materials and advanced technology to reduce the cost of service operation. Available in different capacities and a different budget, these are best in the industry. Today we share the wider marketplace as a manufacturer of Aluminium Melting Furnace in India. The product we are offering is widely known for its energy efficiency and enhanced serviceability.

We are offering tower melting furnaces. the tower melting furnaces are that shaft furnaces that is used for melting aluminum. These are fabricated keeping in mind the requirement of operation. The furnaces are able to provide the per hour output of 3000 kgs and are available in capacities ranging from 500 kgs to 1000 kgs. we use only best quality casting material and back-up linings. To ensure clients satisfaction, we also manage client visit during the process of casting furnace.

• Power Source: Electric
• Type Of Furnace: Muffle furnace
• Automation Grade: Semi-Automatic
• Brand Name: Nabertherm Germany
• Material Loading Capacity (T): 3 to 40L
• Max OperatingTemperature: 1400*C
• Model Name/Number: L/LT series

• Stainless Steels: SS420, Stavax(ESR),Mirrax etc

It is a heat treatment wherein a material is altered, causing changes in its properties such as strength and hardness. It is a process that produces conditions by heating to above the re-crystallization temperature and maintaining a suitable temperature, and then cooling. Annealing is used to induce ductility, soften material, relieve internal stresses, refine the structure by making it homogeneous, and improve cold working properties. Machining induces stresses in parts. The bigger and more complex the part, the more the stresses. These stresses can cause distortions in the part long term. If the parts are clamped in service, then cracking could occur. Also hole locations can change causing them to go out of tolerance. For these reasons, stress relieving is often necessary. Tempering is a process done subsequent to quench hardening. Quench-hardened parts are often too brittle. This brittleness is caused by a predominance of Martensite. This brittleness is removed by tempering. Tempering results in a desired combination of hardness, ductility, toughness, strength, and structural stability. Tempering is done immediately after quench hardening. When the steel cools to about 40 ºC (104 ºF) after quenching, it is ready to be tempered. The part is reheated to a temperature of 150 to 400 ºC (302 to 752 ºF).

Exposed Heating Elements-type, with Certi. & Traceability with Digital PID Control, Short Heat-up Time, Ceramic Fiber, 4-Side Heating, with Ceramic Fiber Plate, 3~63 Lit.

Ceramic Heaters, industrial kilns, insulation item, nichrome wire strips

reverberatory furnaces, Tower Melting Cum Holding Furnaces

Car Bottom Furnace, Tablecloth, Kitchen Towel, Pot Holder, Oven Gloves