Industrial Heaters Dealers in Nandini Layout, Bangalore

This product is manufactured under the supervision of adroit professionals using pristine quality components and advanced technology at our well developed production division. Heating Mantle is widely demanded in different laboratories for the purpose of applying heat to containers as an alternative to heated bath.

Band heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica or Micanite sheet. It is then insulated and covered by metal sheathing and rolled to the required shape. We build every technically possible heaters as per your requirement. Features:• Rust resistant Sheath. • Max. 3.6 watts/cm2• Max. Operating temperature up to 250 °C • Top Quality Nickel Chrome ribbon.• Available with inbuilt insulation pad to reduce power consumption.

We offer hot water generator that possesses dust proof cabinet for control replays, starters, timers and main isolator. The hot water generator that we deal in is ideal for pretreatment line as well as for electro plating line. Besides, the hot water generator is used for mass production and designed especially for chemical or water heating load. features centralized heating systemreliable & ideal for heating 'n' nos. Of tanksdigital control for temperaturesafe to use suitable for 250 to 70oceasy combustion and electronic control for burnersaves energyfree from noise and pollutionautomatically maintains the temperature of tank composition centrifugal feed pumpisi makeelectric motor and guardmild steel base frameburner arrangementelectric ignition equipmentforced draught fandrive motorphotoelectric cell (oil)ultra violet cell (gas) flame equipmentautomatic combustion equipment formoduling typeonoff controlhighlowoff control.

• Material: Mica
• Certification: CE Certified
• Automatic Grade: Semi Automatic
• Warranty: 1 Year
• After-sales Service Provided: Spare Parts

Available with are semi automatic Thermic Fluid Heaters that make use of fuels like coal, wood and agricultural waste. These heaters are available in the capacity ranging from 50,000 k cal hr to 15, 00, 000 k calhr. The circuit embedded in our heaters permits the transfer of energy even at high temperatures.

• Material of Glass: Borosilicate Glass
• Outer diameter: 58 mm
• Inner diameter: 47 mm
• Selective coating type: AIN/AIN-SS/CU – Sputtering
• Recommended operating pressure: 0.2 Kg/sq. cm.
• Length: 1800 mm and 2100 mm

SALIENT FEATURESSolar collector Panel: Flat plate collector panel offers superior thermal contact hence superior heat adsorption conductivity and long term durability. Corrosion resistance of copper. Combined in with the light weight and high thermal conductivities od aluminium.Glass Lined enamel Tank: Hot water storage tank is adapted to the advanced technology of vitreous enamel inner tank. Which fuses ro solid steel at about 900º C. The result is a smooth and tough surface that effectively resists the corrosive attacks of hot water chemicals. Thus ensuring a long life span of water tank.Insulation protection: CFC free polyurethane foam insulation is injected and surrounds the inner tank, filling the space between the inner tank and outer tank thus providing an exceptionally good heat retention barrier. This helps to reduce the energy cost by minimizing standby heat loss.Electric Element: high-quality immersion type element ensures long lasting performance with choice of various heat input (kw) offering different hot water recovery rates.Anode Protection: Each tank is provided with a magnesium anode rod to protect it against corrosion, a process well proven in years of application.Safety Protection: Each tank is provided with a pressure and temperature relief valve (P/T valve). It protects the tank against excessive pressure and temperature by releasing its contents safely to the floor trap via the drain pipe.   Sun Strip AbsorberThe fins metallurgically-bonded Aluminum Completely Surrounds a copper tube waterway Corrosion resistance of the copper combined with the light weight and high thermal conductivity of aluminum Superior thermal contact resulting in superior heat adsorption and conductivity and long term durability Anodized Al selective coating, strongest weather resistance and working well in any area Sputtering Al-N-O selective coating, high absorptance and lower remittance.   Tank profile T/P Relief Valve Pressure Relief Valve Hot Outlet Electrical System Cover Cold Inlet Heat Element Cold Water Spreader Anode Rod Blue Diamond Enamel Coating Insulation NEW TECHNOLOGYWater storage tank is adapted to the advance technology of vitreous enamel inner tank, which fuses to solid steel at about 900°C. The result is a smooth and tough surface that effectively resist the corrosive attacks of hot water chemicals, thus ensuring a long life span of water tank. Insulation ProtectionCFC free polyurethane foam insulation is injected and surrounds the inner tank,filling the space between the inner tank and outer tank thus providing an exceptionally good heat retention barrier. This helps to reduce the energy cost byElectric Elementhigh-quality immersion type element ensures long lasting perfomence with choice of various heat input (kw) offering different hot water recovery rates. Anode protectionEach tank is provided with a magnesium anode rod to protect it against corrosion, a process well proven in years of application.   Thermosiphon SystemA thermosiphon system is a system where the heated water in the solar collectors rise up into the storage tank by natural thermosiphon action. Thermosiphon action occurs when water is heated in the collectors and expands, becomeing lighter. this allows colder, heavier waer to fall by gravitational force to the bottom of the collector pushes the hot water back up into the storage tank. this natural action commonly known as thermosiphon action occurs without any moving part of auxiliary electrical energy input to the system.

• Controller: JSC-2D Digital PID Controller ±0.1 oC Digital PID Controller Automatic START/STOP timer

JSAT-Series Autoclave, Steam Sterilizer is an innovative replacement of conventional laboratory autoclave by providing reliable performance, up-to-dated design and safety door inter-lock system integrated with temperature and pressure for perfect user safety.

• Brand Name: BIOBASE
• Material: STEEL
• Voltage: 220V±10%， 50/60Hz
• Warranty: 1
• Model Number: HME-I (Electronic Display)
• Place of Origin: CHINA

Features corrosion-resisting and ageing-resistant. The internal heater is in hemisphere shape with high efficiency. The external material is cold-rolled steel with anti-bacteria powder coating. It adopts high-temperature resistant-free glass fiber with good isolation performance. Model hme-i (electronic display) hmd-i(led display) capacity(ml) 100 250 500 1000 2000 3000 5000 10000 20000 50000 max. Temp. 380℃ working time continuous consumption(w) 100 150 200 300 400 600 1000 1500 2500 6000 power supply ac220110v±10%, 5060hz internal size (mm) φ70 *40 φ95 *50 φ110 *50 φ150 *70 φ180 *80 φ200 *100 φ245 *150 φ310 *175 φ380 *190 φ480 *270 external size(mm) 200*215*150 240*260 *170 285*300 *200 355*300 *240 415*370 *270 480*430 *300 540*530 *280 665*450 *550 packing size (w*d*h)(mm) 210*225*170 250*70 *190 300*310 *210 300*310 *245 370*380 *285 500*440 *320 560*560 *290 775*775 *560 net weight(kg) 1.7 1.8 1.8 2.7 4 4.5 7 10 13 53 gross weight(kg) 1.8 2 2 3 5 5 8 11 14 68

Domestic Air Source Heat Pump

• Length: 40-50 Inch
• Frequency: 50/60 Hz
• Power: 3 Kw
• Packaging Type: Carton Box
• Heating Capacity: 5 KW
• Dimensions (mm): 19 Mm
• Temperature Capacity: 50-100C
• Specialities: Rugged Construction
• Type: Industrial Water Heater
• Brand Name: Kotak
• Material: Copper
• Certification: ISO 9001:2008
• Application: Water Heating
• Color: White
• Voltage: 220V
• Condition: New
• Finishing: Coated
• Power Source: Solar
• Phase: Three Phase
• Warranty: 1 Year
• Country of Origin: India
• Diameter (mm): 350mm X100mm

Made by best quality MS housing fitted with knitted glass fabric heating surface suitable for capacities of flasks. Maximum surface temperature is 450oC the working of heater. Available in round and flat bottom, Ranging from 50 ml to 50000 ml flasks capacities power 240 V also beaker type mantle, funnel type mantle and suspended type mantle.  

• Brand Name: MAGNETOTHERM
• Voltage: 380V AC TO 415VAC
• Warranty: 1 YEAR
• Brand Name: magnetotherm
• Model Number: MAG
• Place of Origin: INDIA
• Usage: INDUCTION HEATING
• After-sales Service Provided: YES
• 30-100 KHz: Energy-saving

Magnetotherm Induction Heating System uses Solid State Technology which make our system more stable and cost effective for all kind of application like Induction Tempering, Induction Annealing , Induction Brazing, Induction Forging , Induction Welding, Induction Shrink Fitting, Induction Bonding , Induction Hardening, Induction Sintering and Induction Cap Sealing.

induction hardening machine AC servomotor driven Suitable for OD, ID & face hardening of bore & shaft Type components with single shot & scanning facility

• Features: Quality product , Highly reliable , Extensively used .

The Minimum order value Rs. 20lakhs and above This ‘induction hardening machine’ is used for hardening and tempering of the inner tube of the front fork. This machine can accommodate the inner tube of the following diameter. Diameter:- 25-40 mm. & tube length 350-600mm in length.  

We are offering mica heater for toasters. Heating wire is wound in front of mica insulating support having thin mica as a cover for front protection. Chrome coated steel made stiffner and reflector is provided for mica stability and heat reflection.

• Watts: 500W

Finn material SS or Zinc plated MS. Easy to fit all surfaces being completely smooth. May be supplied with graded. Sheath material, Brass, GI, SS, or zinc.

• Power: 1.5 hp
• Voltage: 415 Volts
• Size: 5/8" , 1/2" , 3/8"
• Heater Material: Stainless steel

• Pressure Temperature Switch (PTS): The Boiler is equipped with PTS for safety of the boiler. If water evel falls below the heater, the unit
• Quality of Distillate water: Pyrogen Free Reagent
• Grade 1: Distillate must be Tested before use.
• Conductivity: 0.1 - 0.5 µS/cm.
• Distillate Temperature: 60 - 70ºC
• Voltage A.C: 50Hz - 220/230V.
• Gate Valve: Conserves cooling water wastage in case of power failure.
• Flow Switch: Additional in-built safety for the equipment. Unit shuts off if cooling water to condenser ails.
• Quartz Teflon Stopcock: For easy draining and cleaningof boiler.
• Quartz Threaded connection: For easy assembly and maintenance.

• Size: AS PER REQUIRMENT
• Application: Heaters
• Brand: PHE
• Heater Material: Stainless Steel

• Brand Name: Lorman
• Usage/Application: Boiler Feed Water, Washing Etc
• Power: 415V, 50Hz
• Voltage: 220V, 50Hz
• Warranty: 12 months
• Place of origin: Bengaluru, India
• Model: LT-HWG
• Online capacity: 4 & 6 Liters/min
• Min Temp: 45°C
• Max Temp: 240°C
• Efficiency: 90%*

• Material: Stainless Steel
• Material Grade: 304 or 316
• Brand Name: TTP
• Dimensions: 500 - 4500mm center distance - 226,300,355,380,400 & 520mm wide
• Number of Elements: 1 to 51
• Pitch: 40,45,50,55 & 65mm. 1.5
• Flutes: 7,9 & 21

• Brand Name: Heat masters
• Usage/Application: Heaters, This machine is for induction and resistive heating of metals, used for heat treatments.

We are offering fired marine water heater. Capacity range 20 - 75 mw design pressure up to 2.5 mpa* *can be adapted if requested by the customer.

Heat treatment equipment which in turn results in multi fold life of heat treated products. LVH production centres are spread across the country in order to serve the customers at their door step.

  More than 300 Direct Contact Juice Heaters from VRL are in operation with no complaints of any nature. They play major role in the success story of VRL towards Steam Economy.These Direct Contact Juice Heaters work with very low approach temperature of about 1°C between heating and heated media. This feature allows utilization of low temperature vapors for better use in juice heating. ADVANTAGES Operates with very low approach temperature Contributes towards steam economy, because of low temperature vapour utilization from later vessels of evaporators. Considerable power saving as there is no pressure drop across the heaters for pumping the juice. Considerable power saving as there is no condensate pumps for these heaters. It helps in reducing maintenance and store inventory related to these pumps. Zero maintenance at Juice heaters, as there is no opening/closing of Juice heaters, No tube cleaning, No maintenance & No worry of tube leakages. In short it is a fit and forget type of Juice Heater It helps in reducing maintenance and store inventory related to these pumps.

Anti condensation Air/Panel heater Stainless Steel case for long life  Compact in size Economical, effective and widely used KWK manufacture wide range of anti condensation panel heaters. SHS series is strip type anti condensation heaters with Stainless Steel housings. The con-struction of this heater is extremely robust and reliable. This series provides excellent heating for a wide range of application.

Fixed temperature controller method was adopted by the solar industry in india for a long period. even now some manufacturers are supplying with this design. the ftc method involves the arrangement of collectors in series-parallel or parallel-series configeration. cold water is let into the collector and it remains there without circulation until the desired temperature, say 80ºc, is reached. at the end of the bank of collectors on the delivery-load side, a thermastat and an electro-hyduraulic valve are fixed. as soon as the water in the collectors reaches the set temperature, the electro-hydraulic valve opens and releases the hot water either to the process or to a storage tank. this type of system is not efficient because for efficient heat transfer, there should be a good temperature difference and an optimum flow in the collectors. the flow should be neither too slow nor too fast. in the former case the absorber loses heat because of its high temperatures and in the latter case the time is insufficient to transfer the heat from the absorber to the liquid in this method the thermal losses are high and hence it is not a desirable practice.

• Voltage: 12V-480V
• Power: 1 kw
• Dimension: Customized

We are the exporter and supplier of this products.

Induction Cap Sealing Machine, induction brazing, hardening and anealing