Industrial Plastic Pipes Dealers in Wilson Garden, Bangalore

PEX (or crosslinked polyethylene) is part of a RO Water, Acid & Bicarb concentrate supply piping system that has several advantages over metal pipe (copper, iron, lead) or rigid plastic pipe (PVC, CPVC, ABS) systems. It is flexible, resistant to scale and chlorine, doesn't corrode or develop pinholes, is faster to install than metal or rigid plastic, and has fewer connections and fittings. PEX-Al-PEX (or PEX-Aluminum-PEX or "PAP") is a specialty PEX tubing. This tubing has a layer of aluminum embedded between layers of PEX to provide an oxygen barrier. PEX-Al-PEX may also be called multilayer pipe. PEX-Al-PEX will also retain shape when bent, and may also exhibit less expansion and shrinkage during temperature fluctuations. PEX tubing is made from crosslinked PE (polyethylene) polymer. The PE is melted and continuously extruded into tube. The crosslinking of the PE is accomplished in one of three different methods. Advantages of PEX Plumbing Flexible PEX tube is manufactured by extrusion, and shipped and stored on spools, where rigid plastic or metal piping must be cut to some practical length for shipping and storage. PEX plumbing installations require fewer fittings than rigid piping. The flexible tubing can turn 90 degree corners without the need for elbow fittings, and PEX tubing unrolled from spools can be installed in long runs without the need for coupling fittings. Attaching PEX tube to fittings does not require soldering, and so eliminates the health hazards involved with lead-based solder and acid fluxes; PEX is also safer to install since a torch is not needed to make connections.. PEX resists the scale build-up common with copper pipe, and does not pit or corrode when exposed to acidic water. PEX is much more resistant to freeze-breakage than copper or rigid plastic pipe. PEX tubing does not transfer heat as readily as copper, and so conserves energy. Water flows more quietly through PEX tube, and the characteristic "water hammer" noise of copper pipe systems is virtually eliminated. FLOW of water / chemical inside the PEX tubes are LAMINAR unlike turbulent flow in GI / CPVC pipes. HIGH UV RESISTANCE. Unlike GI and PVC / CPVC pipes, PEX pipes do not have any effect of UV radiation as carbon black is used. With the use of carbon black, PEX pipes can be safely used for external installations.

RAKSHA CPVC Pipes & fittings are for potable water applications. Pipes are manufactured in Copper Tube size [CTS] from ½ ” to 2” with two different standard dimensional ratios SDR-11 and SDR-13.5 . Raksha CPVC Pipes & fittings in SDR-11 & SDR-13.5 are made from the equivalent CPVC compound having similar physical properties. Pipes & fittings are produced as per SDR-11 meet the requirement of ASTM D 2846 where as the pipes with SDR-13.5 meet the requirement derived from ASTM F 442, specific to CPVC in Iron Pipe Size (IPS) dimension, which can also be applied to CPVC pipes in C.T.S dimension. Apart from having the same physical properties, SDR- 11 and SDR-13.5 have different wall thickness and therefore, at any given temperature, have different pressure rating. Raksha CPVC Pipes also comes in Iron pipe size [IPS] from 2 ½” to 4” which meet the requirement of SCH 40 and SCH 80 of ASTM F 441.   SALIENT FEATURES & BENEFITS :   Suitable for use upto 93oC Excellent resistance to chemicals.   No scaling, retards bacterial growth. Smooth internal surface & Energy saving.   Ultimate for Hot & Cold water usage. Fire Resistance and self extinguishing.   Life span of more than 50 years. Lite weight and easy installation.   High impact strength and durability. Completely leaf proof system.

CPVC Pipes are one of the highly demanded Products of our company. The Pipes that we offer are manufactured under the supervision of skilled professionals assuring the best quality. The pipes that we offer are known for their excellent finish and accurate dimensions. We can make available Product in different sizes and specifications according to the diverse needs of buyers. Our CPVC Product has wide industrial applications.

Acrylic tubes are transparent or translucent cylindrical structures made from acrylic, a type of plastic known for its clarity and durability. These tubes are lightweight and offer excellent optical clarity, making them popular for various applications like displays, lighting fixtures, and DIY projects. Acrylic tubes are resistant to impact and weathering, providing a versatile and aesthetically pleasing alternative to glass tubes. They can be easily cut, shaped, and fabricated to meet specific design requirements.

• Material: Acrylic
• Country of Origin: Made in India
• Size/ Diameter: 4 inch
• Length of Pipe: 12 M
• Usage/Application: Construction
• Hollow Section: Circular
• Density: 1.18 g/cm3
• Is It Recyclable: Non Recyclable
• Is It Flexible: Flexible

• Brand Name: Supreme
• Length: 5 Mtr
• Product Code: SDR 13.5
• Size: 1/2 Inch

• Material: Nylon 6,or 6,6 depending upon your requirements
• Application: Pneumatic Controls, Fuels and Oils, Lubrication, Hydraulics, Air Conditioning •Chemical Transfer, Automotive, Instrumentation
• Features: Long Fatigue Life, Dimensional Stability, Excellent Abrasion Resistance, Broad Range of Corrosion-resistance and Chemical compatibility, Resistant to most solvents, alkalis, oils, petroleum products

Industrial Rigid PVC Pipes, Flexible Pipe, Rigid PVC Pipes

Double Wall Corrugated ( DWC ) HDPE plastic pipes are used all over the world as a standard in efficient sewage and drainage systems since the last 40 years. , from ALOM, is a pipe of the finest quality for non-pressure underground sewerage, drainage and cross drainage (pipe culvert) purposes. These pipes will help municipalities, urban conglomerates and industries manage their waste water and rain water very efficiently. Such a system will not only protect the environment but also your investments. Once installed, the pipes are maintenance free and will lie underground for years.   Advantages   Environmentally safe : No leaks, no cracks and no damage to environment and soil   Socio-environmental friendliness : No leaks, no cracks and no damage to environment and soil   Long Lasting : Service life of over 100 years   Cost effective: Uses minimal material for equal strength   Ease of Installation : Uses fewer manpower and can be installed in very constrained locations   Chemical Resistance : Chemically inert to waste water ingredients and ‘crown corrosion’ is non-existent     Application   City and urban clusters : Economical, easier and swifter installation, handling and transportation to overcome socio-environmental issues with underground pipe installations.   Urban sewerage rehabilitation : Economically most viable in crowded and haphazardly grown old core clusters of the city   Highway and busy roads : Anti leakage coupling to create environment friendly and virtually maintenance free drainage corridors   Earthquake prone areas with high tectonic movements: high strength to weight ratio and adaptation of pipe length and roundness to uneven ground or earth movements.   Rainwater drainage : (agricultural, highway and citywide) locations  

• Thickness: 6 mm
• Material: HDPE
• Color: Black
• Country of Origin: Made in India
• Brand: Kaveri
• Size: 40 mm
• Pressure Rating/PN Class: PN 4
• Working Pressure: 2.5 Kg/sqcm
• Usage/Application: Agricultural

• Size: 1/2 inch
• Working Pressure: 3 kg/sq2
• Length: 6 m
• Type: Hardtube
• Application: Plumbing
• Color: White
• Brand: Ashirvad

We are offering pvc hose pipe.

• Size/ Diameter: 32 mm - 600 mm
• Brand Name: Supreme/Mangalam/Varuna
• Length: up to 500 Meter
• Application: Any ware
• Color: Any
• Size/Diameter: 110 mm
• Pressure: 6 to 25 Kg
• Connection End Type: Male
• Flow Rate: Any
• I Deal In: New Only

• Brand Name: Raksha
• Length: all different sizes
• Material Grade: PE 80

We are a celebrated Supplier of PLB HDPE Ducts from Karnataka, India. We have close and strong bonds with the reputed personalities and bring to you a lot that stands out of the rest on counts of longevity and performance. The Ducts are fabricated making use of preeminent quality High Density Poly Ethylene. The Ducts find their usage in ample of areas such as Automatic Signaling, Highways, Computer Network, Railways Information Network, Broad Band networks, Cable Service Providers and others.

• Length: 6 m
• Brand Name: Raksha
• Country of Origin: Made in India
• Material Grade: PE 80
• Size/Diameter: 40mm
• Pressure: 5 bar
• Shape: Round

air pneumatic pipes, Pipes, Pvc Corrugated Pipe, pvc nylon braided pipes

• Material: HDPE
• Color: Black
• Application: Utilities Water
• Single Piece Length: 3 meter,36 meter

We are the exporter and supplier of this products.

• SDR: 11
• Size: 3/4 inch
• Length: 5 m
• Material: CPVC
• Shape: Cylindrical
• Application: Plumbing
• Color: White
• Brand: Ashirvad

We are the Renowned Manufacturer of Composite Piping System Manufactured from High-grade Polyethylene and Aluminium. the Polymer is Effectively Bonded in the Inside and Outside of the Aluminium Core By Melt Adhesive. this Aluminium Core is Cent Percent Leak Proof for Both Liquids and Gases.

plb hdpe ducts, hdpe dwc pipe, Polyethylene Pipes

Pvc Garden Hose, cable sealing plug, Duct Cutter, plastic coupler

Spiral Wrapping Band & Sleeves, Special Flexible Wire, Spiral Wrapping Band

A group of Narmada Pipe Industries, Varuna Neeravari Pipes Pvt. Ltd. is a leading HDPE Pipes Manufacturers in India. With more than 25 years of experience in the pipe manufacturing industry, our HDPE pipes are known for quality and give performances for a long period of time.

Acrylic Tubes, Acrylic Ball, Trophies, poster holders, Display Stands

We are a preeminent Polyurethane Tube Manufacturer, Exporter and Supplier, based in India. Our expertise lies in offering a wide range of Polyurethane Tubes that is known for its quality. Manufactured using premium Polyurethane material, our tubes are made available in various sizes and dimensions. Features : High strengthRemarkable performanceResistant to chemicalsResistant to gasesHardwearing Availability : VAC makeTPL makeCDC make We Also Provide : Nylon tubesBundy tubesNylon & PU tubes and recoiledSSn tubes and Copper tubes Demanded By : Chemical industryPaper industryAutomotive industryFertilizer industryDairy industryGas plantsTreatment plants

industrial pvc pipes, CPVC Plumbing Pipes, cpvc water pipes, Plastic Pipes

Pneumatic Pvc Hose Pipe, CP 32A Jack hammer, BBC 120F Drifter