Instrumentation Equipment Dealers in Nayanda Halli, Bangalore

• Brand Name: HASTHI
• Voltage: 480 V
• Power: 1 HP -30 HP
• Phase: SINGLE PHASE AND THREE PHASE
• Current: 40 A
• Running Capacity: TILL 30 HP
• Starter Type: Fully Automatic

L and T contactor for electrical application for the electrical panels and application for the type mnx, mc, mu starting from range 100 to 1000 amps contactor

  AMF panel and generator packages are designed to provide emergency power during mains supply failure. During operation, the control panel of the AMF monitors the mains entering the building. If a mains failure occurs, the panel will disconnect the mains from the load, the generator is started and its output connected to the load. (The load being appliances, lights, etc in use within the house/office/factory at the time of mains failure). The generator continues to supply the building until the mains supply returns. The generator then automatically disconnects, stops and the mains is re-connected to the load. The AMF panel reverts to the standby mode ready to respond in case of another mains failure. Operation With the generator in 'Auto' mode, the incoming main is monitored continuously. If the mains voltage falls outside the preset limits, a 'mains failure' has occurred and the process of starting the generator set is initiated. Once the mains failure is recognised, the contacts are released to disconnect the load from the mains. The 'mains available' and 'mains on load' lamps extinguish. There is a pre-set and adjustable time delay before the generator is started. This avoids unnecessary starting of the generator when very short duration mains breaks occur e.g. 2 or 3 second breaks due to lightning strikes. After the delay, the engine fuel solenoid / ignition system is energised. A pre-heat period begins for generators fitted with indirect injection diesel engines. The choke is operated on petrol-engined sets. The starter motor relay energises and the engine is cranked for a pre-set period (typically 10 seconds). If the engine fires up and the speed increases through the 'crank-cut' threshold, then the starter motor is dis-engaged. Alternatively, if the engine does not start during the first crank period then the starter de-energises for an equal rest period before energising for another attempt. If the engine has not started after the last 'crank' period, then the engine fuel solenoid / ignition is de-energised and the generator is deemed to have failed to start and the appropriate annunciator is illuminated. Assuming that the generator has started during one of the attempts, the alternator output is checked to ensure that it is within specification. If so, then the generator contactor is energised and the load is supplied from the generator. In normal circumstances, the period from mains failure occurring to generator supply being connected is about 20 seconds. During generator operation, the engine oil pressure and temperatures are monitored and should an abnormality occur, the generator will immediately be shutdown and the appropriate annunciator illuminated. When the mains supply returns, the mains available lamp is illuminated within specified limits. The main is then monitored for a pre-set time to ensure that the supply is stable. The generator contactor is then de-energised and the mains contactor energised so that the mains supply is restored to the load. The 'alternator available' and 'alternator on-load' lamps extinguish and 'mains on load' lamp is illuminated. A short break in approximately 1 second occurs whilst the changeover is complete. The generator is 'run-on' for a cooling down period (adjustable up to 30 minutes) before the fuel solenoid / ignition system is de-energised and the engine stops. The operational cycle is then complete and the generator returns to a standby condition. During this time the starter battery is maintained in a charged condition by a 'trickle' charger supplied from the mains. 

• Country of Origin: India
• Type: Nurse Call System
• Certification: CE Certified, ISO 9001:2008
• Application: Hospital Use
• Weight: 10-20kg
• Color: White
• Voltage: 220V
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 100W
• Driven Type: Electric
• Warranty: 1yrs
• Brand Name: DIGITECH
• Color: red
• Usage: Hospitals
• Product Name: Wireless Nurse Call system (RF based)

• Country of Origin: India
• Type: Fire Alarm
• Application: Industrial
• Color: Red
• Feature: Durable, Quality Assured

• Size: Multi Channels
• Type: Control Panel Boards
• Voltage: 220V
• Material: Mild Steel
• Power: 1-3kw
• Power Source: Electric
• Phase: Single Phase
• Country of Origin: India
• Warrenty: 1 Year
• Autoamatic Grade: Semi Automatic
• Brand Name: SiliconShelf
• Material: MS

Only quality packaging material has been used for the packing of the products that we offer. Moreover, the entire packaging procedure is conducted under the supervision of the experts. Buyers can rest assured; the delivery of consignments will be done within the stipulated time. Our products can be ordered in bulk as well as in retail. Details : Blue Color - Indicates By-Stander Calls Yellow Color  - Indicates Pull Cord activaticn (Call Frcm Toilet ) Red Color  - Indicates the Emergency Calls (Call Frcm Bed Side)

• Size: Available in different sizes
• Type: Single-Phase Control Pane
• Model Number: SP - 01
• Brand Name: High Prior Electricals
• Material: High-quality robust materials
• Application: Residential buildings,, Commercial complexes, Industrial plants, Agricultural setups
• Weight: Available in different sizes
• Color: Multi-color options availabl
• Feature: High efficiency, durability, safety, versatility, user-friendly
• Condition: New
• Packaging Type: Corrugated Box
• Application: Power management in residential, commercial, industrial, and agricultural settings
• Use in: Electrical power control and distribution
• Application: Electrical panel control
• Application: Residential buildings, Commercial complexes, Industrial plants, Agricultural setups
• multi color: Yes
• white black mix: Yes
• Material:: Aluminum Foil-Polyester Tape with 100% Coverage Area
• Types of Property: Durable, efficient, safe
• Voltage: Suitable for single-phase systems
• Frequency: 50/60 Hz
• Enclosure: Weatherproof and dustproof design
• Customization: Available in different sizes and configurations to meet specific requirements
• Manufacturer, Supplier, and Exporter: High Prior Electricals

Control panels, contains various controls to manage the various systems and pumps and filters. These make management of the systems relatively easy.

• Model No: MR5D
• Weight: 550 KG
• Magazine Speed: 0.8 sec/Tool
• Tool Capacity: 24 T
• Tool Diameter: 110/200mm

1 Phase 3 Phase, D.C. Shunt Generators Motors 1 Phase 3 Phase, D.C. Series Compound Generators Machines 1 Phase 3 Phase, Squirrel Cage Slip Ring Induction motors Synchronous Alternators – Motors Machines

• Output: 0 ... 10 V, 0 ... 20 mA, 4 ... 20 mA
• Pressure range: -1 ... 1 mbar / 0 ... 0.3 – 50 mbar

Differential pressure transmitters, These pressure transmitters type 699 are available in switchable pressure ranges and with digital device or Modbus. The full-version includes customer specific adjustment possibilities. Especially developed sensors for each pressure range allow a physically correct and long term stable measurement.

• Brand Name: DSC Tyco
• Material: ABS
• Color: Black
• Usage/Application: Outdoor Applications doors windows sheds
• Voltage V: 3V
• Installation: Outdoor
• Wave Length: 940nm
• Power Source: Batteries

Incoming voltage: 230- 1000vac incoming frequency: 5060hz (variation: 48-62hz) outgoing amperes:25-5150a dc ambient: 0-50 deg c configuration: non regenerative and regenerative communication: profibus dp, devicenet, canopen modbus, controlnet, ethernet.

• Application: Crane Manufacturing
• Power/Voltage: 450/750V
• Size: 2 AWG to 16 AWG

Amco Electrical & Engineering Company supply high capacity Festoon Flat Cables which consist of different sorts of clips or clamps which depend on the types of cables and hoses they are organizing. Electric Cables can also be used where extreme flexing is a requirement, recommended bend radius of three to five times cable diameter. Specifications: Conductor Material: Copper Voltage: 450/750V Temperature Range: -40°C to 105°C Sheathing colour: Black Operating temperature -5 °C 70 °C Operational voltage 300/500V Insulation class 2/3 Comply with CEI 20 – 22 II (Flame resistant) Internal conductors with flexible PVC sheathing progressively numbered, plus earth conductor (yellow/green) Flat Cable Size : 5 sq.mm x 4 core (up to 24 core) 5 sq.mm x 4 core (up to 24 core) 4 sq.mm x 4 core (up to 8 core) 6 sq.mm x 4 core (up to 8 core) 10 sq.mm x 4 core 16 sq.mm x 4 core 25 sq.mm x 4 core 35 sq.mm x 4 core

The LV PFC system can be offered with contactor based Thyristor based (Please refer our product Thyristor Switch Module for further details). We customize the products and design as per the study conducted by us or by others as per recommendations.

pmdc motor drive offered by us, is well-known for its durability and high efficiency among the clients. Our range of pmdc motor drive is manufactured from optimum quality components and using latest technology. Further, the clients can avail these pmdc motor drives at affordable prices. features high efficiencylonger working lifeeasy to operatehigh resolutioneasy maintenance used in conveyorscutting machineelectric vehicle »specifications operating supply24 vaco/p speed adjust0 to 24vdc linear adjustment with pot protectionsover load, over voltage, short circuit, fusedrivehigh speed pwm, with thrust control.capacity10 a /240 wsize120 × 80 mmtemperature0 to +50o chumidity0 to 90% rh (non condensing)

MGS offer a modular or “tiled” surgeons panel.There are different configuration i.e 6 tiles,8 tiles, 12 tiles etc.available as per different requirement. The tiles are fixed to support frames forming two hinged doors allowing front access to the panel. Alternatively,the panel can be manufactured to allow rear access via hinged doors with the front facial being fixed. The use if tiles allows individual

• Application: Hospital
• Brand Name: FABTRIX
• Country of Origin: Made in India
• Model Name: BED HEAD PANEL
• Size: Customized
• Item Code: BHPMS
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)/Other

We offer lt capacitor panel, which are instrumental in smoothing the output power supply in electronic circuits. This is done by them in a process, wherein, the capacitors filter out the interference, by blocking the transmission of direct current, and allowing the alternating current to pass through it. Used in various industries, these are offered by us at the most leading prices. Moreover, our team of quality auditors tests these, in order to provide our clients a defect-less line of capacitors. L&t capacitors are offered with standard duty mpp-s, heavy duty mpp-h, ultra heavy duty ltxl in box and cylindrical versions. 7% detuned reactors and thyristor switching modules and apfc panels are also offered.