Instrumentation Equipment Dealers in Sunkadakatte, Bangalore

Wè provide high efficiency off grid solar power panelsfor your house, industry. need based solutions are executed based on your requirements. n choice.   Additional Information : Minimum Order Quantity: 1 Kilowatt

The 11/12 kv Switching Panel with LBS is suitable for Indoor & Outdoor applications. The Switching Panel consists of a Load Break Switch that can be used for Switching ON & OFF of the transformer. The HRC Fuses used conforms to IS Standards. The Protection / Tripping System is implemented through fuses (Striker pin) & relays and assembled with suitable bus bars. The Panel is Powder Coated with 80-120 microns for its Inner /outer texture with High Quality Process. The Type Tests conducted by us in CPRI Bangalore (Ref. Nos) is as follows (As per IEC & IS Standards): Short Circuit :SC15S0692 (26.3KA rms for 1 Sec) High Voltage : HVML2014S0660 (12/28/75KV) Temperature Rise :SC15S06 (at 630 Amps) IP 55 : EATDHVLM2014s0660 (Category 2) Application: They are used in Residential / Commercial/Large & Small Industrial Uses.

We manufacture, supply and export the best quality Electrical Test Panels. Application: To measure electrical parameters of electronic and magnetic ballast/ chokes, luminaries etc. System Features / Technical Data: Consists of power meter WT210/ WT230 (Yokogawa), Auto transformer, cyclic timer, preset timer, event counter etc Power meter measures supply voltage-current power-frequency-power factor, V harmonics, I harmonics, TIM etc Also measures ballast voltage, open circuit voltage, cathode current, impedance, output frequency of electronic choke etc Testing can be done both in AC and DC voltages. Auto transformers for output fine tuning of supply voltage.

We are one of the renowned thermocouple manufacturers in Bangalore of different applications and specifications. Our thermocouples are specially made under stringent quality conditions. Features: Available for all possible applications Can be made to customers specifications Types-J,K,T,E,R and resistor sensor Supplied with calibration certificates and accessories Available in Plain, Bayonet, Washer, Leaf and Ring types.

As a quality oriented organization, we, Vajra Controls in Bangalore are engaged in manufacturing and supplying a broad array of Main Power Distribution Panel. The offered power distribution panel is widely used at the residential, commercial and industrial places, for enclosing the electrical circuitry and wiring. We offer these panels in various dimensions of sizes and width and also provide customization according to the specifications provided by the customers.

Our Fire Fighting Panels run on diesel or electric motors. We source the Panels from the reliable manufacturers who endow these systems with oodles of power. Our name resounds with quality assurance; hence, with each product that we offer, client’s satisfaction follows. So, when it comes to laying hands on premium Fire Fighting Panels, trust us! We are counted amongst the premier Exporters and Suppliers of Fire Fighting Panels in Bangalore, India.

Our company offers Semi-automatic panel for its manifold system depending on the need and customer specification. The Control panels are safe for low voltage operation and supported with audio visual alarm facility.

• Features: Compact size, Defect free , Completely tested.

We bring forth an exclusive range of direct on line motor starters that is manufactured using quality components and hi-tech machines. Our array of direct on line motor starters is high on demand in the market and is developed in compliance with the varying industrial standards. These starters are known for their sturdiness and optimum efficiency. Besides, these starters can be availed at the most reasonable prices. Appreciated for : trouble-free operationsrugged constructioncorrosion resistance propertydimensional accuracyhigh tensile strength consists of : contactor : which makes and breaks the motor circuit in a starter, is subject to maximum wear, pe-1 contactors have exceptional endurance. The contact system is double break type consisting of robust bounce-free silver contacts.solenoid coil : is machine wound, taped, vaccum-impregnated and baked for tropicalisation. It undergoes rigorous impulse tests in addition to routine check for continuity and for pick-up and drop-off voltages. The coil also acts as an under voltage release, disconnecting supply to motor when the supply voltage is low thus preventing. The motor from serious damages.bimetalic contacts : tested for millions of operations without failure.thermal over load relay : has accurately calibrated bimetallic elements with ambient temperature compensator for over load protection. For more information refer to over load relays. Spares and accessories : thermal over -load relaycontactortimerspare kitoperating coilauxiliary

• Type: Motor Starters
• Certification: AN ISO CERTIFIED COMPANY
• Application: Motor Switching
• Color: Grey
• Voltage: 380V, 440V
• Frequency: 50Hz
• Phase Type: Triple Phase
• Automation Grade: Manual
• Brand Name: PrakashMaruti
• Poles Number: 3pole

• Temperature: 0 to 65 deg C
• Electronics Housing: Stainless Steel or die cast aluminium, flame proof
• Applications: Liquids including hazardous but non-corrosive medium
• Input Supply: 24V DC
• Analog output (Programmable): 4 – 20mA 20 – 4 mA 0 – 10 V DC 10 – 0 V DC
• Mode: Distance OR height measurement
• “ Display ”: 8 x 2 alphanumeric displya, “ 7 segment LED ”
• Communcation: RS 485 – Modbus
• Measuring range: 5mtr, 10mtr 0.5mtr, 1 mtr, 3.5 mtr
• Resolution: 1mm, 5mm or 10mm depending on models
• Accuracy: 0.5% of FSD
• Updation time: 150 mS max
• Minimum distance: 40mm to 300mm depending on range
• Display Filter: None / Low / Medium / High
• Temperature compensation: Inbuilt
• Voltage Variations: Internal calibration and automatic compensation
• Process connections: ½” BSP, 1 ½” BSP
• Electrical connections: PG 9 one gland, 2 numbers
• Sensor face: Anodised aluminium
• Sensor body: PVC

   Design of S-AMF panels as per installed Synchronised AMF panels, we undertake projects Synchronisation with GRID. We have designed for pojects paralelling Multiple Turbine generators. Further we have designed for paralleling DG sets with Multiple STG;s.    The displayed Synchronisation panel was manufactured and installed for kerns Liebers Springs and Stampings. The Paralled sets were 625 - 625 - 125 KVA DG sets of Volvo,Kirloskar and Ashok Leyland makes respectively.    We manufacture Acoustic(Sound proof canopy) for the DG set built in high quality steel and sound attenuating material reduces noise emissions to a minimum. It has easily accesible service and maintainance points through the large doors which contribute to the ease of service of the machine. Sound proof materials used are fire proof. Acoustic is detachable type and can be moved from one place to other. Acoustic frames are fitted using bolt/nuts. The Sound Level at distance of 1 meter is 75 Decibels. The Acoustic is generally powder coated, on request can be sent with only red oxide so that you can paint it as per your needs. The acoustic in the picture sent is Powder coated with Orange/black color. This acoustic is for 25 KVA Genset. DEEPANKURAM have a well-seasoned team, which has total experience of over 150 acoustics. Extreme Care is taken while Acoustics manufacturing not leaving behind any minor defects. The sound proof material used is Glass/Rock wool which are imported from Dubai. The Inner part of the frame is filled with Glass/Rock wool and perforator sheet on it and Punched GI sheets are covered on that. Rivets are used to fix GI Sheets to Frames. The Noise level at a distance of 3 meter is 75db in free field conditions. We also manufacture acoustics for other OEM's.Accoustics done at Deepankuram ranges from 25 kva to 500 kva. The acoustic costs are based on Engine capacity, make, and place available in the site, as these factors are contribute for manufacture of acoustic.

• Size: Multi Channels
• Type: Control Panel Boards
• Voltage: 220V
• Material: Mild Steel
• Power: 1-3kw
• Power Source: Electric
• Phase: Single Phase
• Country of Origin: India
• Warrenty: 1 Year
• Autoamatic Grade: Semi Automatic
• Brand Name: SiliconShelf
• Material: MS

• Country of Origin: India
• Type: Fire Alarm
• Application: Industrial
• Color: Red
• Feature: Durable, Quality Assured

• Size: Customizable
• Type: Panel enclosures
• Material: CRCA / SS
• Length: Customizable
• Application: industrial
• Color: Customizable
• Width: Customizable

Control panels: PLC Based, relay &contactor logic panels, VFD / Varable Frequency Drive panels, Direct online panels.

Product Details of Three Phase Pump Control Panel:   MAGNUM Three Phase  Pump Control Panel Gold is a powerful controlling device for your submersible pump made with heavy duty components, it switches & protects your pump from hazards caused due to over-current.   Power: 2, 3, 5, 7.5 & 10 H.P Phase: Three Phase Voltage: 440 V   Salient Features: Three Phase Pump Control Panel powder coated MS enclosure for corrosion resistance & sturdiness. Rugged MaK-1 Contactor with wide voltage band (140-220V). Fitted with MaK-1 type relay for reliable overload protection. Fitted with toroidal type current sensing preventer which can be used to protect the motor against single phasing. Fitted with a voltage selector rotary switch to reading phase to phase voltage between all phases. Easy & Quick mounting. Ergonomic design with aesthetic looks. No screw protruding from the panel back. Hence additional safety from water, dust, corrosion and electric shock.

• Brand Name: DSC Tyco
• Material: ABS
• Color: Black
• Usage/Application: Outdoor Applications doors windows sheds
• Voltage V: 3V
• Installation: Outdoor
• Wave Length: 940nm
• Power Source: Batteries

Soft Starters for 3-phase asynchronous motors from 0.1 KW to 560 kW along with control Panels for smooth start and stop for induction motors thereby increasing life of the machines with jerk-free starts and stops.

MELSEC-Q Series: its powerful presence guides the Q Series to the top, where no PLC has ever been before. With its nano-order speed basic command processes, the next generation MELSEC-Q Series dramatically improves system and machine performance.As equipment and manufacturing facilities continue to evolve on a daily basis, the series enables high-speed, high-accuracy and large volume data processing and machine control.

Differential pressure transmitters Pressure transmitter is also called as pressure sensors, used to measure the pressure of any liquids or gases. When the pressure is created in a system, the electrical signals will be created and this is used to measure the pressure after the calibration. SRI Electronics manufactures the pressure transmitters of different ranges. The standard pressure transmitter MBS 32 and MBS 33 is designed for use in almost all industrial applications, and offers a reliable pressure measurement, even under harsh environmental conditions.

Venkat Switchgears has a major presence in distribution stage of the power supply chain, with a wide range of products that includes Distribution & Power Transformers, Instrument Transformers – Current and Potential Transformers, HV Switchgears – Load Break Switch & Vacuum Circuit Breaker, LT & HT Panels, Compact Substations, Diesel Generator Sets and Cable Trays approved by ESCOMS, ISRO, CPCB II, BIS and other Electricity Companies.

• Brand Name: Ridhi

We are one of the manufactures of fluorscent starter for tube light.

ht metering cubicle, ht load break switch panel, HT Transformers

• Accuracy: 2%
• Power: 24 V,DC,4 Wire
• Output: 0-10V Standard. Optional 0-5V,1-5V & 2-10V & 4-20mA
• Temperature Range: 0-100 Deg C
• Cable Or Enclosure: ABS Plastic
• Dimensions: 80(H)*82(W)*55(D) in mm
• Model Name/Number: SRHTx-2000v
• Brand: Surya Insts
• Temp Accuracy: +/- 0.4 Deg C accuracy
• Sample Rate: 3 Samples / Sec.
• Repeatability: +/-0.1% Typical

• Country of Origin: Made in India
• Usage/Application: Industrial
• Input Phase: Single Phase
• Input Voltage: 265 VAC
• Material: MS
• Frequency: 50 Hz

• Features: Easy installation, Corrosion free, Optimum finish

• Model No: MR5D
• Weight: 550 KG
• Magazine Speed: 0.8 sec/Tool
• Tool Capacity: 24 T
• Tool Diameter: 110/200mm

It is a flat, vertical where control or monitoring instruments are displayed or an enclosed unit that is the part of a system that users can access, as the control unit of a system.

• Temperature Range: 0 to 400°C, 0 to 600°C, 0 to 1200°C

We are Leading Manufacturers and Suppliers of All types of Thermo Couples. According to Clients orders we will manufacture different sizes raging with Dia 3mm, 4mm, 5mm, 6mm, 10mm, 22mm,