Kamdhenu TMT Bars Dealers in Lalbagh Road, Bangalore

• 0.2% P.S. (or Y.S) N/mm2 or MPA: 500
• Tensile Strength N/mm2 or MPA: 545
• Total Elongation % min: 12
• CHEMICAL (MAX %): -
• Carbon: 0.25
• Sulphur: 0.055
• Phosphorus: 0.055
• Micro-Alloy: 0.3
• Bend Test: No transverse crack should form after bending through 180° around a mandrel of dia specified below
• Bars upto and including 20 mm, dia: 4d
• Bars over 20 mm, dia: 5d
• Rebend Test: No transverse crack should form after bending through 45° and reverse bending the same through 22.5°
• Bars upto and including 10 mm, dia: 5d
• Bars over 10 mm, dia: 7d

Strength of the bars are carefully controlled by optimizing the water pressure for their pearlitic core and tough surface of tempered martensite, thereby providing an optimum strength, ductility and toughness. TMT bars are widely used in general purpose concrete reinforcement structures, bridges and flyovers, dams, thermal and hydel power plants, industrial structures, high-rise buildings, underground platforms in metro railway and rapid transport system. TMT Bars are thermo-mechanically- treated through leading world tempcore based technology for high yield strength. The process involves rapid quenching of the hot bars through a series of water jets after they roll out of the last mill stand. The bars are cooled, allowing the core and surface temperatures to equalize. The bar core cools down slowly to turn into a ferrlite-pearlite aggregate.

TMT Bars   Thermo Mechanically Treated Bars or TMT Bars are a very essential element of any Structure. Tor Steel or Cold Twisted Deformed Bars have been completed replaced by TMT Steel in the present day due to the superiority of TMT over CTD Bars. We are engaged in the supply of TMT Steel for the construction industry and we are authorized dealers of SAIL & RINL TMT Bars. We are also Stockists and Distributors of TMT made by most major manufacturers across the length and breadth of the country and can meet customer demand with a wide variety of options for the customers to choose from. We stock can provide all standard sizes of TMT Bars that may be required by the customers. The commonly available sizes of TMT Bars are 8mm, 10mm, 12mm, 16mm, 20mm, 25mm, 28mm, 32mm, 36mm

We are manufacturers of TMT bars TOR bars in bangalore. The production of quality TMT bar depends on three major factors quality raw materials, a properly designed and automated mill, and a well-designed quenching and tempering technology.

TMT Bar

TMT Bar, Grey Cement, Channel

TMT Bars

TMT Bars, Carbon Steel Sheets, ferro niobiums, ferro vanadiums

TMT Bar, Channel, Galvanized Sheet, Iron, steel

TMT Bars, Refractory, Castings, ms square

TMT Bars

TMT Bars, tmt steels, Steel Angles, Steel channels, Steel Beams

TMT Bar, iron plates, Iron Rod, metal pipe, Metal Tubes, Steel Channel

TMT Bar, Rigid Pipe, steel Products

TMT Bar, Coil, Iron Products, steel Products, Steel Sheet

TMT Bar, Iron, steel, Steel channels, Steel Sheets

TMT Bar, Cement, Elbow fitting, industrial joint, Pvc Pipe

TMT Bar