Laser Cutting Tool Dealers in Peenya, Bangalore

• Material: Cast Iron
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm
• Application: Milling Industries
• Color: Grey, Silver
• Feature: Best Quality, Corrosion Proof, Fine Finished, High Strength
• Finishing: Polished

We deal in the finest quality Spot Facing Tools in the national market. Our Back Spot Facing Tools are used for back spot facing / chamfering on jobs using drilling machines, Machining centers, Boring machines etc. Their cycle of working can be programmed. Additionally, we are a prime Forward Spot Facing Tool Manufacturer in India. Rear spot facing around the hole is a cumbersome operation while adopting the conventional boring bar with HSS blades or cutters. The time required for fixing, setting and removing the blade/cutter is very high; being HSS, the cutting is very slow; and, whenever the cutting edge becomes blunt, it requires expensive and time â�� consuming regrinding. All these result in the very high down time of the main machine. The automatic back spot facing tool is specially designed to make the back spot facing operation faster and cheaper. Since it totally eliminates manual interruption during back spot facing operation, not only expensive machine down time is saved, but also it is the most ideally suited tool for back spot facing operation on programmable /CNC machining centers. As the most of tools are offered with standard carbide insert, all the advantages of insert tooling will be available. Construction The back spot facer consists of a case hardened and ground alloy steel shank, which takes location in the hole on which back spot facing is carried out. Provided in the pilot shank is a recess, for accommodating the insert holder or wing. Clamped on the wing is standard carbide insert with the help of a clamp screw. Being LH threaded, it holds the insert in a correct position. In the recess, the wing is eccentrically pivoted on hardened and ground pivot pin and pivot screw. A suitable clearance is provided on the pilot shank to enable it to freely rotate in a drilled hole. These tools are so designed that with various combination of pilot shanks, it is possible to obtain different back spot facing combinations. Sizes and Specification The back spot facing diameter is offered in relationship to its pilot shank diameter â�� i.e. at ratio 2:1. In other words, back spot facing is possible with this type of tool up to approximately twice the diameter of the nominal diameter of the pilot, subject to some design restrictions. Tools below 12mm pilot are normally offered with solid HSS wing, having integral pivot pin.  Operations The automatic back spot facing tool, rotating in reverse direction, is inserted in to the hole. The wing, even it opens in rotation, instantly folds into the recess as it touches the rim of the hole in the work piece. After the wing clearly comes out of the pilot hole, the spindle rotation is reversed to forward direction. Then the wing swing out of the recess due to centrifugal force. With feed it cuts. On completion of the spot facing operation, the spindle rotation is reversed and the tool is withdrawn. During the back spot facing, since cutting force tends the tool to pull down of the spindle, it is adviceable to fix the tool in the machine spindle with a cotter/drive key/draw bolt. It may be noted that the smaller size tools are running at comparatively higher speeds. Here, the wings, therefore, swing out easily due to high centrifugal force. However, large tools operate in lower speeds, which mean centrifugal force acting on the wing may be insufficient, particularly when the tools work in horizontal position, thus resulting the wing to remain in the recess. To overcome this problem, tools above 300mm pilot are provided with spring washer as shown in the sketch. The spring washer keeps the wing open after it comes clear of the pilot hole, irrespective of the speed at which the tool is being rotated.

• Size: 10-13inch, 13-15inch, 3-5inch, 5-7inch
• Type: Segmented Diamond Saw Blade
• Certification: CE Certified
• Color: Available in Many Colors
• Finishing: Polished
• Application: Cutting
• Weight: 1-2kg

We manufacture and export Segmented Diamond Saw Blades for wet cutting. Segmented Diamond Saw Blades are mainly fit for manual machines. Segmented Diamond Saw Blades are available for single saw blade, multi saw blade, gang saw, grinding disc, core drill bits. The Segmented Diamond Saw Blades offered by us make cutting easier. We deal in Domestic and International Market. Benefits Less Noisy High Productivity Smooth, Easy and Fast cutting Supreme Quality

• Material: Alloy
• Application: Industrial
• Features: High in quality, Reliable, Affordable

Our Solid Carbide Broach Cutters are sharp, accurate in dimensions having longer service life. The Broach Cutters that we make available are offered by us in ample of specifications. When it comes to delivery, we make arrangements for quick and safe deliveries without any discrepancies. They are provided by us at fair prices. We are a top-notch Manufacturer, Supplier and Exporter of Solid Carbide Broach Cutters from Bangalore, India.

We also offer an exclusive range of Laser Cutting Components, which is available in various dimensions and can be personalized as per the requirement of our valued clients.These are fabricated using best grade raw materials in compliance with industry standards.

We are capable of delivering the product range that is accessible from our massive inventory located at Bangalore(India). Owing to our flawless transit system, we are capable of delivering the orders within the promised time frame.

plastic cutting tools, corner cleaning cutters, Cutting Blades, Drills

turning tools, Jigs, Milling Tools, precision press components, Press Tools

Cnc Tools, cnc rotary tables, Rotary Table, power generation products

precision turning tools, Hydraulic End Fittings, hydraulic bending machines

profile cutters, Wood Cutting Tools, Wood Working Machines

Solid Carbide Tools, fine boring tools, precision machine tool, Reamers

automatic back spot facing tools, automatic duplex deburring, Boring Head

marble cutting cutting tools, Broaches, Cutters, Pressed Components

CNC Cutting Tools, Cutting Tools, End Mill Tools, Industrial Tools

back spot facing tool, Deburring Tools, inseatu milling attachments, Jigs

Product Description: We specialize in providing Profile Cut Components that are manufactured using high-grade steel and within a tolerance range of 1mm. These are available in varied thicknesses ranging from 3 mm to 300 mm and sizes ranging from 6.5 meters to 18 meters. Our range of Profile Cut Components is extensively used in electrical, power & agricultural industries and earth moving sector. Being a renowned service provider, we undertake job work as per the specifications laid down by the customers.

Carbide Tips, Taps, Reamers, Non Ferrous Metal, Mild Steel Plate