Laser Cutting Tool Dealers in Bangalore

We are capable of delivering the product range that is accessible from our massive inventory located at Bangalore(India). Owing to our flawless transit system, we are capable of delivering the orders within the promised time frame.

We are offering carbide cutting tools. End mills , drills , multi point step drills , form tools , profile milling cutters ,reamers ,hole mills , etc

AMADA MIYACHI Sigma Laser Tube Cutting System is the ideal solution for precision laser cutting of medical hypo tubes and stents. High speed direct drive stages are mounted to granite isolated from a supporting welded frame. Multi-axis options allow users to customize the laser tube cutter according to the cutting application for both on and off axis cut geometries. The fiber laser offers excellent beam quality and high pulse repetition rates for high speed precision cutting of metals. The tube cutter may be configured with either a microsecond fiber (Yb:fiber) or femtosecond disk (Yb:KYW thin disk) laser. The femtosecond disk laser offers best-in-class cut quality using cold ablation cutting to produce an unrivalled edge quality that significantly reduces post processing costs on metals such as nitinol, as well as providing cutting capability for bio-absorbable polymers. Laser cutting systems are rapidly emerging as the preferred choice for many fine laser cutting or machining applications, particularly when superior edge quality, tight dimensional tolerances and/or high volume production is required as in the medical, automotive, electronics, aerospace, and solar industries. Solid state industrial lasers, which emit light at a short wavelength (typically near 1 micron), provide a reliable, stable energy source, have exceptional beam quality and are relatively easy to integrate into existing manufacturing productio Features of the Fiber Laser Cutter are: + 2, 3 and 4 axes motion options + 0.01 - 0.98" tube diameter capability + Available for wet and dry cutting + Automated tube feeder option + Laser source options

We are offering circular knife blades. the core expertise of the company lies in providing to the clients circular knife blades, which are made using high quality carbon steel. Manufactured in compliance with international quality standards, circular knife blades that we offer are widely demanded in the markets. customized range can be provided to suit the exact demands of the clients. Consequently, circular knife blades can be availed by the clients at most discounted rates. attributes : excellent finishhigh tensile strengthresistance to corrosiondurableconsistent performance available in : different designsvarious sizes

We are noteworthy Manufacturer and Supplier of Hand Tools, situated in Bangalore. Forged with best-grade steel, our Hand Tools are appreciated for their soft and firm grip, precision-marked scale, durability and trouble-free service. We offer standard left hand thumb screw movement as well as requested right hand thumb screw movement. Different metallic and chrome finishes are available at buyer’s discretion. Moreover, our prices are reasonable.

• Material: Metal
• Certification: ISI Certified
• Application: Hospital
• Color: Silver
• Variety: Double Edge, Single Edge
• Feature: Sharp
• Packaging Type: Paper Box, Plastic Packet

Buyers can rely on us for on-time delivery as we are assisted with up-to-date transit and logistics services. Combining our expertise with the technology that we possess, we take the responsibility to deliver utmost quality Laryngo scope to the customers.

Usage For Marble, Limestone, Sandstone, Granite, Concrete, Refractory and Asphalt Manufacturing Segments are produced from latest machineries and technology from Germany Features Free Cutting with optimum lifeNo chipping, excellent sawn finishConsistent performanceAvailable in the range of 200mm to 3500mm diameter.

• Material: Cast Iron
• Shape: Round
• Thickness: 10-20mm, 20-30mm, 30-40mm
• Application: Milling Industries
• Color: Grey, Silver
• Feature: Best Quality, Corrosion Proof, Fine Finished, High Strength
• Finishing: Polished

We deal in the finest quality Spot Facing Tools in the national market. Our Back Spot Facing Tools are used for back spot facing / chamfering on jobs using drilling machines, Machining centers, Boring machines etc. Their cycle of working can be programmed. Additionally, we are a prime Forward Spot Facing Tool Manufacturer in India. Rear spot facing around the hole is a cumbersome operation while adopting the conventional boring bar with HSS blades or cutters. The time required for fixing, setting and removing the blade/cutter is very high; being HSS, the cutting is very slow; and, whenever the cutting edge becomes blunt, it requires expensive and time â�� consuming regrinding. All these result in the very high down time of the main machine. The automatic back spot facing tool is specially designed to make the back spot facing operation faster and cheaper. Since it totally eliminates manual interruption during back spot facing operation, not only expensive machine down time is saved, but also it is the most ideally suited tool for back spot facing operation on programmable /CNC machining centers. As the most of tools are offered with standard carbide insert, all the advantages of insert tooling will be available. Construction The back spot facer consists of a case hardened and ground alloy steel shank, which takes location in the hole on which back spot facing is carried out. Provided in the pilot shank is a recess, for accommodating the insert holder or wing. Clamped on the wing is standard carbide insert with the help of a clamp screw. Being LH threaded, it holds the insert in a correct position. In the recess, the wing is eccentrically pivoted on hardened and ground pivot pin and pivot screw. A suitable clearance is provided on the pilot shank to enable it to freely rotate in a drilled hole. These tools are so designed that with various combination of pilot shanks, it is possible to obtain different back spot facing combinations. Sizes and Specification The back spot facing diameter is offered in relationship to its pilot shank diameter â�� i.e. at ratio 2:1. In other words, back spot facing is possible with this type of tool up to approximately twice the diameter of the nominal diameter of the pilot, subject to some design restrictions. Tools below 12mm pilot are normally offered with solid HSS wing, having integral pivot pin.  Operations The automatic back spot facing tool, rotating in reverse direction, is inserted in to the hole. The wing, even it opens in rotation, instantly folds into the recess as it touches the rim of the hole in the work piece. After the wing clearly comes out of the pilot hole, the spindle rotation is reversed to forward direction. Then the wing swing out of the recess due to centrifugal force. With feed it cuts. On completion of the spot facing operation, the spindle rotation is reversed and the tool is withdrawn. During the back spot facing, since cutting force tends the tool to pull down of the spindle, it is adviceable to fix the tool in the machine spindle with a cotter/drive key/draw bolt. It may be noted that the smaller size tools are running at comparatively higher speeds. Here, the wings, therefore, swing out easily due to high centrifugal force. However, large tools operate in lower speeds, which mean centrifugal force acting on the wing may be insufficient, particularly when the tools work in horizontal position, thus resulting the wing to remain in the recess. To overcome this problem, tools above 300mm pilot are provided with spring washer as shown in the sketch. The spring washer keeps the wing open after it comes clear of the pilot hole, irrespective of the speed at which the tool is being rotated.

• Size: 10-13inch, 13-15inch, 3-5inch, 5-7inch
• Type: Segmented Diamond Saw Blade
• Certification: CE Certified
• Color: Available in Many Colors
• Finishing: Polished
• Application: Cutting
• Weight: 1-2kg

We manufacture and export Segmented Diamond Saw Blades for wet cutting. Segmented Diamond Saw Blades are mainly fit for manual machines. Segmented Diamond Saw Blades are available for single saw blade, multi saw blade, gang saw, grinding disc, core drill bits. The Segmented Diamond Saw Blades offered by us make cutting easier. We deal in Domestic and International Market. Benefits Less Noisy High Productivity Smooth, Easy and Fast cutting Supreme Quality

• Material: Stainless Steel
• Finishing: Polished
• Country of Origin: Made in India
• Usage/Application: Cutting Tools
• Size: 0-15mm
• Shape: Round
• Weight: 0-100g

• Brand Name: Mati

Manufacturers of ejector sleeves, ejector blades, ejector pins. We are specialists in mfr ejector sleeves max length 1250 mm with id dia 3.00 mm.

HL-CFI-6040S-500 series high precision fiber laser cutting machine adopts dual-drive system, and grinding machine screw drive, which guarantee the high speed moving precision and superior laser cutting performance. It is widely used in precision machinery hardware, microelectronics and other high-quality cutting applications.  

We also offer an exclusive range of Laser Cutting Components, which is available in various dimensions and can be personalized as per the requirement of our valued clients.These are fabricated using best grade raw materials in compliance with industry standards.

Boring Bars are single point boring tools used for enlarging pre-existing bores, usually in turning operations. They are designed with various insert and clamping configurations. The shanks can be made of steel, a combination of steel & carbide as well as heavy metal depending on the required bore depth.

Symbolizes lasting love and is the birthstone for April. This highly prized and most valuable gemstone is the hardest of all substances. Cut and polished diamonds are renowned for their optical properties and brilliance.

We bring forth a quality assured range of Hand Tools in the market. These Hand Tools are generally used during manual work. Our range of Hand Tools is manufactured from quality raw material, and finds applications in various electrical and mechanical works. These Hand Tools can be availed from us at fair prices in suitable packaging.   

we offer boring bars. being a professionally managed & a progressive company, we have earned the reputation of being a customer oriented firm by addressing the requirements of our clients. our company with its efficient and dynamic management, is engaged in the custom engineering and designing of products like: collets, collet chucks, tool holders, boring bars, indexable boring bars, customized boring bars.

We offer pcd tools. Pcd tools & inserts

Usage – For cutting of all kinds of Granite, Marble, Sandstone, Limestone and other Natural Stones Fast Cutting No Chipping, Excellent Sawn finish Free cutting with optimum life Available from 110mm to 3500mm diameter

Product Description: We specialize in providing Profile Cut Components that are manufactured using high-grade steel and within a tolerance range of 1mm. These are available in varied thicknesses ranging from 3 mm to 300 mm and sizes ranging from 6.5 meters to 18 meters. Our range of Profile Cut Components is extensively used in electrical, power & agricultural industries and earth moving sector. Being a renowned service provider, we undertake job work as per the specifications laid down by the customers.

• Material: Alloy
• Application: Industrial
• Features: High in quality, Reliable, Affordable

We are a prominent Supplier and Exporter of Industrial Cutting Tools in Karnataka (India). We are tied-up with the most reliable vendors who assure quality Cutting Tools. The Tools that we deal in have dimensional accurateness and fine finish. They are highly praised for durability, flawless performance and effective functioning. We provide a wide array of Industrial Cutting Tools that are corrosion resistant. Besides, we welcome bulk orders and assure timely delivery of the same.

• Material: Stainless Steel
• Thickness: 20mm
• Diameter: 5inch
• Usage: Wood Cutting
• Brand Name: Powertex
• Number of Teeth: 40T
• Cutting Speed (RPM): 1200 RPM

steel blades, Tile Cutting Machine, tile cutting blades

Carbide cutter, Diamond Grinding Wheel, Grinding Wheels, Industrial Lubricant

Pcd Tools, Precision Tools, Carbide Tipped Reamers

Carbide Tips, Taps, Reamers, Non Ferrous Metal, Mild Steel Plate