Liquid Flow Sensor Dealers

• Type: Averaging Pitot Tube
• Material: Carbon Steel, Stainless Steel, Steel
• Application: Blower Air, Clean Liquid, Flare Gas, Flue Gas, Gas Flow Measurement, Hot Air, Laboratory
• Color: Grey, Silver
• Feature: Durable, Easy To Install, High Quality, Quality Approved
• Condition: New
• Finishing: Non Polished
• Packaging Type: Box, Carton, Corrugated Box

Series AFG Averaging Flow Grid cost effective air flow station for ducts up to 60" the series afg flow grid is an outstanding simple yet accurate cost effective alternative to other duct mounted pressure sensors. Once installed and connected to a suitable measuring instrument, the device will provide years of trouble free monitoring of both air and gas flow. Installing the afg flow grid is quick and easy, the afg is supplied in kit form to allow both workshop and on-site installation into a wide range of square and circular ducts up to approximately 60". the afg flow grid is a fundamental pressure sensing device designed to transmit a continuous differential pressure signal. When this output is connected to a suitable measuring instrument (i.e., manometer, pressure transducer, etc.), it may be used to determine air velocity and volume flow rate. how the afg flow grid works the afg flow grid consists of two tubes mounted diagonally across a square or rectangular duct, or diametrically across a round duct. The tubes are drilled with a series of equi-spaced holes. the holes in one tube face directly upstream and sense total pressure, while the pairs of holes in the second tube also face forward but at an included angle of 79 degrees, sensing static pressure. The total and (sub) static pressures are averaged along the length of each tube and provide pressure signals at connectors outside the duct wall. The pressure differentials across these connectors constitute the output signal. product applications to display differential pressure, velocity or volume flow using a micro manometer, gage, or transmitter to give a warning of over or under flow rate using a pressure switch to control air supply in a system by connecting the grid to a pressure transmitter with an electrical output which can be used to feed into a control system to display differential pressure on a simple fluid manometer to give visual indication of changes in volume flow rate in the duct modeldescription afg-1averaging flow grid, 5/16" (8 mm) tube diameter, 27" (688 mm) tube length. afg-2averaging flow grid, 5/8" (16 mm) tube diameter, 59-4/5" (1518 mm) tube length. specifications service:monitor air or compatible gas flow. wetted materials:304 ss, pvc, polyurethane, acetyl plastics, and neoprene rubber. accuracy:±5%. maximum temperature:176°f (80°c). velocity range:295.2 ft/min to 5904 ft/min (1.5 to 30 m/sec). diameter of tubes:5/16" (8 mm) or 5/8" (16 mm). maximum duct diagonal:60.4" (153.4 cm). maximum duct diameter:59.4" (150.9 cm). process connections:5/16" barbed. weight:afg-1: 1 lb (454 g); afg-2: 3 lb (1361 g). features kit complete with 2 probes and installation hardware trimmable length for any duct size up to 60" alternative to costly air flow stations Material : And Neoprene Rubber. Feature : Easy To Install, High Quality, Quality Approved Packaging Type : Carton Type : Series AFG Averaging Flow Grid Finishing : Polished Use : Monitor Air Or Compatible Gas Flow. Color : Silver Condition : New

• Applications: To display differential pressure, velocity of volume flow using a micro manometer etc.

The Series AFG Flow Grid is an outstanding simple yet accurate cost effective alternative to other duct mounted pressure sensors. Once installed and connected to a suitable measuring instrument, the device will provide years of trouble free monitoring of both air and gas flow. Installing the AFG Flow Grid is quick and easy, the AFG is supplied in kit form to allow both workshop and on-site installation into a wide range of square and circular ducts up to approximately 60". The AFG Flow Grid is a fundamental pressure sensing device designed to transmit a continuous differential pressure signal. When this output is connected to a suitable measuring instrument (i.e., manometer, pressure transducer, etc.), it may be used to determine air velocity and volume flow rate. How the AFG Flow Grid Works The AFG Flow Grid consists of two tubes mounted diagonally across a square or rectangular duct, or diametrically across a round duct. The tubes are drilled with a series of equi-spaced holes.

Sight Glass Flow Indicator With Liquid Flow Sensor   Model No :: BT PHTFS PC Product Specification :: Broiltech produced POLYCARBONATE flow meter and flow sensor that provide sight flow indication with battery operated display or pulse output,  Helical rotor polycarbonate flow meter and sensor   Material of construction: Enclosure                   : PC + GF Rotor                          : PA66/POM/PPS Shaft                           : Hard Stainless Steel-316 bearing : carbon/pom with hard S.S. BALL Accuracy (standard installation position) : +/-  0.5 or 1%  FSD Repeatability : 0.05%                                                                                                              Maximum working pressure : 2.5 MPa                                              Fluid &Ambient temperature: -40 to 120 Deg. C Connection: Thread (M)   1) Pulse output sensor : a) Hall sensor Power voltage: 5 to 24  V DC/ Low power: 2 to 5 V DC Output signal: NPN open connector                                           Output:   high electric level : High than 4.5 VDC( input voltage 5 VDC) low electric level  : lower than 0.5 VDC( input voltage 5 VDC) b) Reed sensor c) pick up coil - two wire/ amplified three wire option    2) Battery operated meter  : Power voltage: 3.0 Vbatteries can be used more than 1 years in a row. display mode: Double row Liquid Crystal Display (LCD), as follows:      L XXX. X    four instantaneous flow (m3 / h) or L/h      L XXXX. X    Partial total  (m3 / h) or L/h      XXXXX.X*100  eight cumulative flow (m3)  or L     XXXXX.X*100  eight cumulative flow (m3)  or L( never reset total) Cumulative flow: automatically expand the display precision, the cumulative flow/partial values can be reset. Power-fail protection: instrument coefficient, the Total flow values ten years is not lost when power supply drop.   3) Display with 4 to 20 mA Output Power voltage: 24 V DC Output signal: 4 TO 20 mA     Helical flow sensor model no wise  Technical data:   Model no                   Connection(M)                   Range                           Pulse/Litter     BT-PHTFS-004            1/4 BSP                        5~40~400 L/H                        4200 BT-PHTFS-008            1/2 BSP                     10~150~1500 L/H                     1200 BT-PHTFS-012            3/4BSP                      50~500~5000 L/H                     215 BT-PHTFS-020            1” BSP                      80~8000~8000 L/H                       97 BT-PHTFS-025            1.25” BSP              100~1000~10000 L/H                    52  Product Features ::              •flow measurment with 1% accuracy,                           • I ndependent of viscosity, perfect for 1 to 106 mm²/s              • Low pressure drop compared with other positive displacement meters              • High resolution             • Pulsation-free measurement, non-sensitive to pulsating flows             • Resistant to corrosion by advanced materials and bearings Range ::   Product Applications :: Pure Water Fuel Oil High Viscosity Liquid

• Material: Stainless Steel
• Brand: FLUIDO
• Model Name/Number: FS Series
• Connection Type: 1/4" to 3" bsp
• Accuracy: +/- 0.5%

• liquid flow measurement: 600 ml/min (36 l/h)

Type 8708 is an instrument for liquid flow control in process technology. The actual value supplied by the sensor is transmitted through the digital electronics and over a standard signal output or a fi eld bus interface. In the device two calibration curves can be stored, which the user is able to switch between.

• Usage/Application: FLOW MEASUREMENT
• Brand: TURCK
• Media: Liquid
•  :  

• Type: Liquid Flow Sensor
• Material: Plastic
• Application: Industrial
• Operational Mode: Bidirectional
• Supply Voltage: 5 V DC
• Flow Rate: 0.5 to 25 liter / minute

• Application: Industrial
• Payment Terms: L/C (Letter of Credit)/T/T (Bank Transfer)
• Item Code: FMIPL-ABR-052
• Brand: Flowtech
• Media: Water
• Flow Rate: Max. 80,000 LPH
• Connections: Flanged, Screwed, Triclover Joint, Hose Nipple
• Temperature Range: 0 to 50 Deg C
• Accuracy: +/- 2% F.S.D
• Repeatability: 0.50%

Liquid Flow Sensor, Zone Leak Monitor Panels, Distance Read Monitor Panels

Liquid Flow Sensor, 1250 MOTORISED BUTTERFLY VALVE

Liquid Flow Sensors, Vibrating Fork Level Switch, Vibrating Level Switch

UHP Liquid Flow Sensor, UHP Liquid Flow Controller, Liquid Flow Meter

Liquid Flow Sensor, Temperature Elements

SS Liquid Flow Sensor, Flow Control Valves, welding filler wire