Measurement Gauge Dealers in Hmt Main Road, Bangalore (60 products available)

1.Carbide Plug Gauges are normally supplied with GO in Carbide & NOGO in Stabilised Steel. 2.Both can be supplied in carbide as per requirement. 3.MGPL gauges have excellent wall thickness to give desired results. Range 0.5 to 8 mm Reversible type design 8 to 40 mm Taper shank design 40 to 60 mm Trilock Design 60 400 mm Plate tyhpe Plug Gauge 4.Extra lenght up to 100 mm can be supplied as per requirement.

Analog Penning Vacuum Gauge is a cold cathode ionization Gauge that consist of two electrode cathodes. In the Analog Penning Vacuum Gauge a difference of about 2.2KV is applied between the anode and the cathode through current limiting resistor. The Analog Penning Vacuum Guage is manufactured using highest quality high vacuum measurement in order to ensure higher accuracy of result. Salient Features : Rugged and stabilised DC power supply for accurate reading Easy maintenance of the sensor Rugged design for no filament burnout Instant start up Standardized to heat and voltage fluctuations Compatible out put for process set point controller

HHV programmabel Micro-vac gauge cum controller consists of four modules namely, Pirani module, Penning module, CPU cum set point controller module, and a power supply module. The gauge is designed using the latest micro controller, which enables accurate and fast measurement

• Measuring Range: 3/4 inch
• Material: Steel
• Color: Silver
• Product Type: Weld Gauge
• Thickness: 30 mm

• Size: CUSTOM
• Type: Industrial Gauges
• Material: TOOL STEEL
• Diameter: 20-40mm, 80-100mm
• Shape: PROFILE
• Certification: ISI Certified
• Application: Industrial Use
• Color: ANY
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Rust Proof
• Display Type: Analog
• Pressure: 5000-10000psi
• Connection: CUSTOM
• Liquid Pressure: 500-1000bar
• Gas Pressure: 500-1000kg
• Country of Origin: India
• Brand Name: CUSTOMIZED
• Condition: NEW
• Power Source: TOOLTECHNOLOGIES
• Warranty: 1 YEAR
• After-Sales Service Provided: YES
• Configuration: AVIALIABLE
• Color: ANY
• Size: ANY
• Product: GAUGES

• Brand Name: BIOBASE
• Material: die-casting aluminum
• Model Number: BK-2000
• Place of Origin: CHINA

Features Model BK-2000 Ambient temperature -20~80� Rated pressure -68~103Kpa Accuracy �2% 3% 4% at 21� Overpressure 172KPa Surface diameter 120mm Shell material die-casting aluminum Range 30Pa-80KPa Measured media Non-corrosive gas or air

• Display: 4-digital LCD display
• Measuring Range: 1.2 to 220mm(steel)
• Features: Low battery indication, Auto Power Off, Backlit LCD Display,
• Minimum display unit: 0.1mm
• Working frequency: 5MHz/2.5MHz
• Minimum limit for tube measuring: 20*3mm(steel)
• Accuracy: +/-(1%H+0.1)mm,H denotes the measured thickness.
• Sound velocity range: 1000 to 9999 m/s

• Size: 2inch, 4inch, 6inch, 8inch
• Type: Gauges
• Material: Mild Steel
• Diameter: 20-40mm, 40-60mm, 60-80mm, 80-100mm
• Shape: Round
• Application: Liquid Pressure, Measuring Gas
• Display Type: Analog
• Pressure: 10000-15000psi, 5000-10000psi
• Feature: Accuracy, Perfect Strength
• Connection: Bottom Connection
• Liquid Pressure: 500-1000bar

• Brand Name: omega metrology products
• Place of Origin: india
• Name: shivaji rao

Vertical or horizontal type profile projector and vision measurement machine with dro, pc based software with magnification 10x or 20x vision measurement machine.

• Application: Measuring coating thickness of ferrous and Non Ferrous material
• Application: Industrial
• Brand Name: Monarch Controls
• Weight: 200gms
• Frequency: 50Hz
• Production Capacity: 100 Units Per Month

Dial Size : 100, 150 mm (Die cast aluminium case), Accuracy ± 1.5%, Bourdon Tube :Brass, Process Connection : ⅜, ½, BSP & NPT Male (Adjustable length 400 mm max), Dial :Aluminium white background with black letters, Pointer : Micrometer zero adjustable (Black Aluminium), Capillary : Copper Sheath (PVC cover Optional).

Our industrial gauges and measuring gauges are designed to be the most cost effective way to check the critical dimensions of components and are geared to enhance the productivity of our clients by enabling consistently high quality of products. Our gages effectively inspect the dimensions before the die is sent for production to prevent errors in dimensional accuracy.

• Feature: High material strength, Fine finish, Compact design

• Model: 4PQSSSS2 & 6PQSSSS2
• Connection: 100mm: 3/8” BSP (M) & 150mm: ½” BSP (M)
• Accuracy: +/- 1% of the full scale value.
• Size: 100 & 150 mm
• Case & Bazel: SS 304 (Bayonet type)
• Socket: SS 316/SS 316L (Welded to case)
• Bourden: SS 316L
• Joints: TIG Argon arc
• Movement: SS 304
• Dial: Aluminum white with Black & Red markings
• Pointer: Aluminum Black (micro adjustable)
• Glass: Acrylic/ Polycarbonate
• Mounting: Bottom Direct
• Process Temp: Max 300 Deg C
• Ambient Temp: -25 to +65 Deg C
• Ranges: Vac, 1,2,4,7,10,16,25,40,70,100,160,250,400 & 600 Kg/cm2
• Optional Extra: Safety/Laminated Glass, Glycerin/Silicon oil filling.

• Accuracy: ±0.5 mm
• Size (mm): 3, 4, 5, 6, 8, 9, 10, 11, 12, 14, 16, 19, 22, 25
• No. of Blades: 7
• Brand Name: Insize

We are offering pressure gauge. Pressure gauge becomes a very important and nowadays integral part of the complex hydraulic equipments in order to monitor the pressure flowing through the circuit and also is important to control the pressure when it is above or below the actual hydraulic pressure required. Pressure gauges can be found even in the routine hydraulic equipments like equipments used to measure tire pressure in auto mobiles. The pressure gauge is attached in a certain intersection in the hydraulic circuit and is connected through a hydraulic tee and it monitors the pressure flowing through that particular pipe or hydraulic hose.

eliCoil Gauges are available as Go/No Go thread plug gauges for inspection of tapped holes prior to HeliCoil fitment. The gauges are available in 5H & 6H class for Metric sizes and 2B/3B for UNC/UNF sizes. Accuracy of the finished thread when the insert is installed is dependent upon the accuracy of the tapped hole. If the finished tapped hole gages satisfactorily, the installed insert will be within the thread tolerance. It is not necessary to gage the installed insert. After the insert is installed, the GO thread plug gage may not enter freely; however, the insert will always seat itself when the bolt or screw is installed and tightened. (Reference NASM33537).Gage handles and all gage nibs are marked with the extreme product limits for the particular size and class of fit. When gaging tapped holes which have been thoroughly cleaned or which have a protective finish applied, the gage should always be lubricated with light oil. HI nib may enter provided a definite drag results on or before 3rd turn from entry – Ref. FEDSTD-H28, Screw thread Standards for Federal Services.Working gages provide a guaranteed minimum wear allowance on the pitch diameter of the GO members of two ten thousandths of an inch (.0002). These gages are recommended for production in sizes 1/2 inch and smaller.Reference gages have pitch diameters on or close to minimum (basic size). They are essentially laboratory or master gages and should be used in case of conflict between two working gages. Conflict can occur when one of the gages has experienced more use and wear. The complete gage consists of the GO thread plug gage, the HI thread plug gage and the appropriately marked gage handle. Accuracy of the finished thread, when the insert is installed, is dependent upon the accuracy of the tapped hole. 

• Type: Pressure Gauge Regulator, Pressure regulators
• Brand Name: DOPAG

Perfectly constant material flow DOPAG material pressure regulators are used to reduce the feed pressure down to the required operating pressure. As well as accurately regulating material pressure, these valves will also compensate for pulsations that occur as a result of the reciprocating action of piston pumps. Pulsations cause a brief decrease in pressure that could lead to a slight reduction in the flow of material. These regulators can be used on materials with viscosities from 5,000 to 500,000 mPa s. DOPAG material pressure regulators are manufactured with two different types of construction: MPR with piston MPR with membrane

• Model Number: Size
• Certificate: ISO9001
• Standard: ISO

Strain Gauge manufactured by IPA are of foil type and comes in two different impedances which are 120 Ohms and 350 Ohms. These are used in the manufacture of loadcells and various strain measurement applications. We also manufacture nickel gauges for : Span compensation Temperature compensation

• Brand Name: Phynix
• Measuring Range: 30 mm
• Material: Plastic
• Display Type: Digital
• Least Count: 0.1 micron
• Operating Temperature: 0 to 60 Degree C

We are offering pressure gauge.

Our liquid-filled bourdon vacuum gauges are industrial-grade dial gauges suitable for pressures down to 1 Torr (mbar). Bourdon tube constructed of phosphor bronze,Corrosion- and impact-resistant, industrial-grade Zytel nylon case, Removable Zytel nylon bezel design for easy calibration, Large 2-12" dial and non-yellowing clear glycerin fill for readability.

• Model: DPRG-01D
• Range: 0.999 to 0.001 m.bar
• Features: Engineered for total reliability, Totally indigenous, Compact solid state electronics

The Pirani gauge consists of a metal filament (usually platinum) suspended in a tube which is connected to the system whose vacuum is to be measured. Connection is usually made either by a ground glass joint or a flanged metal connector, sealed with an o-ring. The filament is connected to an electrical circuit from which, after calibration, a pressure reading may be taken. Pirani Gauge instruments can be used in high vacuum systems, coating units, sputtering units, and many other applications where vacuum to be measured in the range of upto 0.001 mm Hg.

• Country of Origin: Made in India
• Accuracy: 1.60%
• Range: 30Hg / 0 / 150 psi
• Connection Type: BSP

• Voltage: 230V
• Country of Origin: Made in India
• Operating Mode: Automatic
• Power Source: Electric
• Warranty: 1 Year
• Display: Digital

• Material: Alloy Steel, Brass, Iron, Stainless Steel, Steel
• Certification: ISI Certified
• Voltage: 0-6VDC, 6-12VDC
• Condition: New, Used
• Display Type: Analogue, Digital
• Driven Type: Battery Use
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof
• Automation Grade: Automatic, Manual

GENERAL FEATURES: Performance as per IS3624 & DIN 837-1. Accuracy ±0.5% OR ±1% of FSD. Positive Pressure Ranges up to 600Kgcm² or Other equivalent measuring unit. Dials size 4” & 6” All standard Connection Threads options Vertical or Horizontal mounting options Bourdon tube in stainless steel casing. Suitable for most environments & Field applications.

• Brand Name: Varun
• Material: Alloy
• Features: International standard, Great output, Completely tested