Measurement Gauge Dealers in Jalahalli West, Bangalore

• Voltage: 230V
• Country of Origin: Made in India
• Operating Mode: Automatic
• Power Source: Electric
• Warranty: 1 Year
• Display: Digital

• Material: Alloy Steel, Brass, Iron, Stainless Steel, Steel
• Certification: ISI Certified
• Voltage: 0-6VDC, 6-12VDC
• Condition: New, Used
• Display Type: Analogue, Digital
• Driven Type: Battery Use
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Robust Construction, Rust Proof
• Automation Grade: Automatic, Manual

• Feature: Compact solid state electronics, Two gauge head capability

This electrically heated filament is an arm of a self balancing wheat stone bridge circuit. An automatic control amplifier corrects bridge voltage automatically, so that the filament temperature is kept constant around 120°C throughout the whole measuring range. Thus the required bridge voltage (which varies depending upon the pressure at the sensor head filament) is a measure of the pressure which after proper conditioning and calibration is displayed on the meter

The Digital Pirani Vaccum Gauge helps the user to measure small pressure changes. In a Digital Pirani Vacuum Gauge, nickel and tungsten wires are used as filament. Nickel Wire does not only have higher sensitivity but also possess other advantages. The Digital Pirani Vacuum Gauge works on the theory that, when the wires heats to an optimum temperature to portray the sensitivity in the environment. The Digital Pirani Vacuum Gauge is used to measure the discrepancy in temperature.Features : Measurement range 0.001 to 1000 mbar Easy “ATM” and “0” adjustment on the signal conditioner PCB Space saving rugged design- 1/8 DIN console Mounts in any orientation Brass body measuring cell with metal-sealed feed the rough Universal Power Supply Integrated Set Point Adjustment and Relay Output Easy To Read 4 Digit Backlit Display Point Controller With 2 Relays (select mod el DPRG- 2GH-SP) (Illustrated model: DPRG-2GH-SP ) Applications : Controlling high vacuum systems Fore vacuum pressure monitoring Safety circuits in vacuum systems General vacuum measurement & control in the fine and rough vacuum range.

• Material: Stainless Steel
• Shape: Round
• Application: Industrial
• Warranty: 1 Year
• Specialties: Rust Proof, Perfect Strength, Easy To Fit

• Brand Name: omega metrology products
• Place of Origin: india
• Name: shivaji rao

Vertical or horizontal type profile projector and vision measurement machine with dro, pc based software with magnification 10x or 20x vision measurement machine.

• Application: Measuring coating thickness of ferrous and Non Ferrous material
• Application: Industrial
• Brand Name: Monarch Controls
• Weight: 200gms
• Frequency: 50Hz
• Production Capacity: 100 Units Per Month

1.Carbide Plug Gauges are normally supplied with GO in Carbide & NOGO in Stabilised Steel. 2.Both can be supplied in carbide as per requirement. 3.MGPL gauges have excellent wall thickness to give desired results. Range 0.5 to 8 mm Reversible type design 8 to 40 mm Taper shank design 40 to 60 mm Trilock Design 60 400 mm Plate tyhpe Plug Gauge 4.Extra lenght up to 100 mm can be supplied as per requirement.

• Size: 2inch, 4inch, 6inch, 8inch
• Type: Gauges
• Material: Mild Steel
• Diameter: 20-40mm, 40-60mm, 60-80mm, 80-100mm
• Shape: Round
• Application: Liquid Pressure, Measuring Gas
• Display Type: Analog
• Pressure: 10000-15000psi, 5000-10000psi
• Feature: Accuracy, Perfect Strength
• Connection: Bottom Connection
• Liquid Pressure: 500-1000bar

• Size: CUSTOM
• Type: Industrial Gauges
• Material: TOOL STEEL
• Diameter: 20-40mm, 80-100mm
• Shape: PROFILE
• Certification: ISI Certified
• Application: Industrial Use
• Color: ANY
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Rust Proof
• Display Type: Analog
• Pressure: 5000-10000psi
• Connection: CUSTOM
• Liquid Pressure: 500-1000bar
• Gas Pressure: 500-1000kg
• Country of Origin: India
• Brand Name: CUSTOMIZED
• Condition: NEW
• Power Source: TOOLTECHNOLOGIES
• Warranty: 1 YEAR
• After-Sales Service Provided: YES
• Configuration: AVIALIABLE
• Color: ANY
• Size: ANY
• Product: GAUGES

• Material: Steel
• Measuring Range: 20 mm
• Color: Silver
• Feature: Rust Proof
• Usage/Application: Measurement
• Type Gauge: Weld Gauge

We are offering fixture, gauges our range of fixture and gauges is widely demanded by several industries. The range enhances the productivity of different assemblies and is famous for its attributes like precise dimensions and durability. In addition, the range is manufactured with qualitative ferrous & non-ferrous material. Furthermore, we also offer customized fixture and gauges that fall in line with the specifications of the customers.

Ammonia Pressure Gauge is widely used in diverse industries like chemical, petrochemical etc. Clients approach us for Ammonia Pressure Gauge manufactured by us due to high end performance and longevity. Ammonia Pressure Gauge is a perfect solution for you. Type : Commercial Weather proofGlycerin filled Optional : Tailor made dial markingsOther standard threads

• Radius of Leaves Included(mm): 1 mm, 1.25 mm, 1.5 mm, 1.75 mm, 2 mm, 2.25 mm, 2.5 mm, 2.75 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm, 6 mm, 6.5 mm,7 mm
• Accuracy: ±0.03

• Material: Brass
• Hardness: 45 HRC
• Corrosion Resistance: Yes
• Surface Finish: SS Polished
• Outer Diameter: 44 mm
• Set Contain: 4 Pieces
• Set Of: 4 Piece
• Inner Diameter: 38 mm
• Tensile Strength: 135 MPa

We are offering pressure gauge.

• Model: DPRG-01D
• Range: 0.999 to 0.001 m.bar
• Features: Engineered for total reliability, Totally indigenous, Compact solid state electronics

We are offering pressure gauge. Pressure gauge becomes a very important and nowadays integral part of the complex hydraulic equipments in order to monitor the pressure flowing through the circuit and also is important to control the pressure when it is above or below the actual hydraulic pressure required. Pressure gauges can be found even in the routine hydraulic equipments like equipments used to measure tire pressure in auto mobiles. The pressure gauge is attached in a certain intersection in the hydraulic circuit and is connected through a hydraulic tee and it monitors the pressure flowing through that particular pipe or hydraulic hose.

eliCoil Gauges are available as Go/No Go thread plug gauges for inspection of tapped holes prior to HeliCoil fitment. The gauges are available in 5H & 6H class for Metric sizes and 2B/3B for UNC/UNF sizes. Accuracy of the finished thread when the insert is installed is dependent upon the accuracy of the tapped hole. If the finished tapped hole gages satisfactorily, the installed insert will be within the thread tolerance. It is not necessary to gage the installed insert. After the insert is installed, the GO thread plug gage may not enter freely; however, the insert will always seat itself when the bolt or screw is installed and tightened. (Reference NASM33537).Gage handles and all gage nibs are marked with the extreme product limits for the particular size and class of fit. When gaging tapped holes which have been thoroughly cleaned or which have a protective finish applied, the gage should always be lubricated with light oil. HI nib may enter provided a definite drag results on or before 3rd turn from entry – Ref. FEDSTD-H28, Screw thread Standards for Federal Services.Working gages provide a guaranteed minimum wear allowance on the pitch diameter of the GO members of two ten thousandths of an inch (.0002). These gages are recommended for production in sizes 1/2 inch and smaller.Reference gages have pitch diameters on or close to minimum (basic size). They are essentially laboratory or master gages and should be used in case of conflict between two working gages. Conflict can occur when one of the gages has experienced more use and wear. The complete gage consists of the GO thread plug gage, the HI thread plug gage and the appropriately marked gage handle. Accuracy of the finished thread, when the insert is installed, is dependent upon the accuracy of the tapped hole. 

• Model: 4PQSSSS2 & 6PQSSSS2
• Connection: 100mm: 3/8” BSP (M) & 150mm: ½” BSP (M)
• Accuracy: +/- 1% of the full scale value.
• Size: 100 & 150 mm
• Case & Bazel: SS 304 (Bayonet type)
• Socket: SS 316/SS 316L (Welded to case)
• Bourden: SS 316L
• Joints: TIG Argon arc
• Movement: SS 304
• Dial: Aluminum white with Black & Red markings
• Pointer: Aluminum Black (micro adjustable)
• Glass: Acrylic/ Polycarbonate
• Mounting: Bottom Direct
• Process Temp: Max 300 Deg C
• Ambient Temp: -25 to +65 Deg C
• Ranges: Vac, 1,2,4,7,10,16,25,40,70,100,160,250,400 & 600 Kg/cm2
• Optional Extra: Safety/Laminated Glass, Glycerin/Silicon oil filling.

• Model Number: Size
• Certificate: ISO9001
• Standard: ISO

• Brand Name: Phynix
• Measuring Range: 30 mm
• Material: Plastic
• Display Type: Digital
• Least Count: 0.1 micron
• Operating Temperature: 0 to 60 Degree C

• Type: Pressure Gauge Regulator, Pressure regulators
• Brand Name: DOPAG

Perfectly constant material flow DOPAG material pressure regulators are used to reduce the feed pressure down to the required operating pressure. As well as accurately regulating material pressure, these valves will also compensate for pulsations that occur as a result of the reciprocating action of piston pumps. Pulsations cause a brief decrease in pressure that could lead to a slight reduction in the flow of material. These regulators can be used on materials with viscosities from 5,000 to 500,000 mPa s. DOPAG material pressure regulators are manufactured with two different types of construction: MPR with piston MPR with membrane

Our industrial gauges and measuring gauges are designed to be the most cost effective way to check the critical dimensions of components and are geared to enhance the productivity of our clients by enabling consistently high quality of products. Our gages effectively inspect the dimensions before the die is sent for production to prevent errors in dimensional accuracy.

Strain Gauge manufactured by IPA are of foil type  and comes in two different impedances which are 120 Ohms and 350 Ohms. These are used in the manufacture of loadcells and various strain measurement applications. We also manufacture nickel gauges for : Span compensation Temperature compensation You can have all the accessories like adhesives, cleaning agents, elements for bonding of strain gauges etc. from us.

GENERAL FEATURES: Performance as per IS3624 & DIN 837-1. Accuracy ±0.5% OR ±1% of FSD. Positive Pressure Ranges up to 600Kgcm² or Other equivalent measuring unit. Dials size 4” & 6” All standard Connection Threads options Vertical or Horizontal mounting options Bourdon tube in stainless steel casing. Suitable for most environments & Field applications.

• Brand Name: Varun
• Material: Alloy
• Features: International standard, Great output, Completely tested

Strain Gauge manufactured by IPA are of foil type and comes in two different impedances which are 120 Ohms and 350 Ohms. These are used in the manufacture of loadcells and various strain measurement applications. We also manufacture nickel gauges for : Span compensation Temperature compensation

• Material: Mild Steel
• Finishing: Coated
• Packaging Type: Box