Measurement Gauge Dealers in T Dasarahalli, Bangalore

• Feature: Engineered for total reliability, Totally indigenous

This is a cold cathode ionisation Gauge consisting of two electrodes anode and cathode. A potential difference of about 2.2 KV is applied between anode and cathode through current limiting resistors. A magnetic field is introduced at right angles to the plane of the electrodes by a permanent magnet having nearly 800 gauss magnetic field which will increase the ionisation current.

• Measuring Range: 3/4 inch
• Material: Steel
• Color: Silver
• Product Type: Weld Gauge
• Thickness: 30 mm

• Brand Name: BIOBASE
• Material: die-casting aluminum
• Country of Origin: CHINA
• Model Number: BK-2000

Features Model BK-2000 Ambient temperature -20~80℃ Rated pressure -68~103Kpa Accuracy ＜2% 3% 4% at 21℃ Overpressure 172KPa Surface diameter 120mm Shell material die-casting aluminum Range 30Pa-80KPa Measured media Non-corrosive gas or air

• Size: 2inch, 4inch, 6inch, 8inch
• Type: Gauges
• Material: Mild Steel
• Diameter: 20-40mm, 40-60mm, 60-80mm, 80-100mm
• Shape: Round
• Application: Liquid Pressure, Measuring Gas
• Display Type: Analog
• Pressure: 10000-15000psi, 5000-10000psi
• Feature: Accuracy, Perfect Strength
• Connection: Bottom Connection
• Liquid Pressure: 500-1000bar

• Application: Measuring coating thickness of ferrous and Non Ferrous material
• Application: Industrial
• Brand Name: Monarch Controls
• Weight: 200gms
• Frequency: 50Hz
• Production Capacity: 100 Units Per Month

• Type: Cement Level Indicator
• Color: Blue
• Feature: Measure Fast Reading, Perfect Strength, Filling And Air Relief
• Condition: New
• Display Type: Analog, Digital
• Application: Industrial
• Ambient Temp: -20 to 60 deg C
• Universal In DPDT Output: 15 to 80 VDC
• Process temperature: Max 250 degree celsius
• End Connection: Flanged Ends and Screwed Ends

Analog Penning Vacuum Gauge is a cold cathode ionization Gauge that consist of two electrode cathodes. In the Analog Penning Vacuum Gauge a difference of about 2.2KV is applied between the anode and the cathode through current limiting resistor. The Analog Penning Vacuum Guage is manufactured using highest quality high vacuum measurement in order to ensure higher accuracy of result. Salient Features : Rugged and stabilised DC power supply for accurate reading Easy maintenance of the sensor Rugged design for no filament burnout Instant start up Standardized to heat and voltage fluctuations Compatible out put for process set point controller

1.Carbide Plug Gauges are normally supplied with GO in Carbide & NOGO in Stabilised Steel. 2.Both can be supplied in carbide as per requirement. 3.MGPL gauges have excellent wall thickness to give desired results. Range 0.5 to 8 mm Reversible type design 8 to 40 mm Taper shank design 40 to 60 mm Trilock Design 60 400 mm Plate tyhpe Plug Gauge 4.Extra lenght up to 100 mm can be supplied as per requirement.

• Brand Name: omega metrology products
• Country of Origin: India
• Name: shivaji rao

Vertical or horizontal type profile projector and vision measurement machine with dro, pc based software with magnification 10x or 20x vision measurement machine.

• Material: Stainless Steel
• Shape: Round
• Application: Industrial
• Warranty: 1 Year
• Specialties: Rust Proof, Perfect Strength, Easy To Fit

• Size: CUSTOM
• Type: Industrial Gauges
• Material: TOOL STEEL
• Diameter: 20-40mm, 80-100mm
• Shape: PROFILE
• Certification: ISI Certified
• Application: Industrial Use
• Color: ANY
• Feature: Accuracy, Easy To Fit, Measure Fast Reading, Perfect Strength, Rust Proof
• Display Type: Analog
• Pressure: 5000-10000psi
• Connection: CUSTOM
• Liquid Pressure: 500-1000bar
• Gas Pressure: 500-1000kg
• Country of Origin: India
• Brand Name: CUSTOMIZED
• Condition: NEW
• Power Source: TOOLTECHNOLOGIES
• Warranty: 1 YEAR
• After-Sales Service Provided: YES
• Configuration: AVIALIABLE
• Color: ANY
• Size: ANY
• Product: GAUGES

We are offering pressure gauge. Pressure gauge becomes a very important and nowadays integral part of the complex hydraulic equipments in order to monitor the pressure flowing through the circuit and also is important to control the pressure when it is above or below the actual hydraulic pressure required. Pressure gauges can be found even in the routine hydraulic equipments like equipments used to measure tire pressure in auto mobiles. The pressure gauge is attached in a certain intersection in the hydraulic circuit and is connected through a hydraulic tee and it monitors the pressure flowing through that particular pipe or hydraulic hose.

We are offering fixture, gauges our range of fixture and gauges is widely demanded by several industries. The range enhances the productivity of different assemblies and is famous for its attributes like precise dimensions and durability. In addition, the range is manufactured with qualitative ferrous & non-ferrous material. Furthermore, we also offer customized fixture and gauges that fall in line with the specifications of the customers.

• Range: 0-25mm
• Anvil retracting strock: 3mm
• Measuring force: 6-9N
• Optional accessory: dial indicators (graduation 0.01mm), digital indicators (resolution 0.01mm/0.0005

The Pirani gauge consists of a metal filament (usually platinum) suspended in a tube which is connected to the system whose vacuum is to be measured. Connection is usually made either by a ground glass joint or a flanged metal connector, sealed with an o-ring. The filament is connected to an electrical circuit from which, after calibration, a pressure reading may be taken. Pirani Gauge instruments can be used in high vacuum systems, coating units, sputtering units, and many other applications where vacuum to be measured in the range of upto 0.001 mm Hg.

Strain Gauge manufactured by IPA are of foil type  and comes in two different impedances which are 120 Ohms and 350 Ohms. These are used in the manufacture of loadcells and various strain measurement applications. We also manufacture nickel gauges for : Span compensation Temperature compensation You can have all the accessories like adhesives, cleaning agents, elements for bonding of strain gauges etc. from us.

• Brand Name: Phynix
• Measuring Range: 30 mm
• Material: Plastic
• Display Type: Digital
• Least Count: 0.1 micron
• Operating Temperature: 0 to 60 Degree C

Our industrial gauges and measuring gauges are designed to be the most cost effective way to check the critical dimensions of components and are geared to enhance the productivity of our clients by enabling consistently high quality of products. Our gages effectively inspect the dimensions before the die is sent for production to prevent errors in dimensional accuracy.