Milling Machine Dealers in Bilekahalli, Bangalore

• Operating principle : cutting/impact
• Speed range: 3000 - 6500 rpm

Process type inline Operating principle cuttingimpact Motor rating input 1000 W Motor rating output 500 W Speed range 3000 - 6500 rpm Power-on time ON 120 min Power-om time OFF 30 min Milling chamber, can be cooled with water no Mill feed can be cooled in milling chamber with dry ice yes Mill feed can be cooled in milling chamber with liquid nitrogen no Dimensions (W x H x D) 320 x 380 x 300 mm Weight 9.7 kg Permissible ambient temperature 5 - 40 °C Permissible relative moisture 80 % Protection class according to DIN EN 60529 IP 22 RS 232 interface no Analog output no Voltage 230 115 V Frequency 5060 Hz Power input 1000 W

• Dimension: 38.1 x 52 x 64.1cm (W x D x H)
• Weight: 30 kg Motor :1/3 hp Electrical: 230V, 50 Hz
• Movement: 3.2 cm - Vertical
• Speed: Adjustable from 500 to 1750 strokes / min
• Safety: Lid interlock prevents mill from running if lid is open.
• Timer: Digital in minutes: seconds, Maximum 5 min
• Vessels: Deep well titer plates, Vials from 0.6ml to 50 ml CE Approved

Unique new design with vigorous up-and-down motion. (100% vertical motion). Processing up to 4 deep-well plates and sample vials from 0.6 to 50mL. Able to process most plant matter and animal tissue samples. Safety interlocks and pneumatic cylinder stabilize the lid for safe operation. No variation in shaking process makes it ideal for QuEChERS method. Prepares tissue for extraction of DNA/ RNA, proteins, and volatile organics. Kryo-Tech- accessories available for temperature sensitive samples. Pulverizes samples with or without buffer, using a variety of grinding media. Typical grinding cycle completed in under 2 minutes.   Grinding Media      Balls & Cylinders in Stainless Steel, Silica, Zirconia, and Ceramic SS grinding balls in sizes from 4 to 11 mm Grinding beads available in three grades: Molecular Biology , Low Binding, Acid Washed New ceramic grinding cylinders aid in the mixing and homogenization of samples for the QuEChERS method     Grinding Vessels :   Deep well Titer plates in 96 and other formats (Upto 4 plates can be done simultaneously with large clamp)   2 ml, 5ml, 15 ml and 50 ml tubes Cryo tubes Micro vials, Micro centrifuge tubes   Applications :   Biotechnology, Forensic, Plant Research & Crop Science, Pesticide Residues, Pharmaceuticals, Marine Biology.

milling moulding tools, grinding, turning moulding dies

• Type: Mineral Ore Powder Making
• Input Size: 38-55 mm

LM series vertical mill is one advanced mill, adopting top technology domestic and abroad, and based on many years’ mill experiences. It can crush, dry, grind, and classify the materials.LM series vertical milling machine can be widely used in such industries as cement, power, metallurgy, chemical industry, non-metallic mineral. It is used to grind granular and powdered materials into powder with required fineness. Features 1. Low Investment Cost.This mill itself can crush, dry, grinding, classifying, so the system is simple, and occupation area is about 50% of ball mill system. In addition, it can be installed outside, so it will reduce a large number of investment costs.2. Low Operation Cost. ⑴ High efficiency: roller compacted materials directly onto the grinding disc, so power consumption is low. Compared with ball mill, it saves energy consumption by 30% ~ 40%.⑵ Less wear and tear: As the roller is not in direct contact with the disc, and material of the roller and liner is high quality, so life lime is long.3. High Drying Ability.As the hot air inside contacts directly with the material, drying ability is higher, and it saves energy. By regulating the air temperature, it can meet requirements with different humidity.4. Simple and reliable operation.⑴ It is equipped with automatic control systems, so remote control makes it easy to operate. ⑵ It is equipped with one device,which prevents the roller from contacting with the liner directly, and avoids the destructive impact and severe vibration.5. The stability of product quality. As the material stays in the mill for a short time, it is easy to detect and control the product particle size and chemical composition, to reduce duplication of milling, stable product quality.6. Maintenance convenience.By repairing fuel tank, rotating the arm, it is fast to replace the roller sleeve, and liner, and reduce the downtime loss.7. Environmental protection.It is with small vibration, low noise, and the overall sealing. The system works under negative pressure,   Working Principle Vertical mill has two pairs of grinding rollers, each pair of roller composed of two narrow rollers, mounted on the same axis and can rotate at different speeds. There are two circular disc slot, and roller to the tire shape, work pressure in the tank. Disc roller and the relative sliding velocity between small and roller can swing, even if the roller sleeve and the disc after the liner wear can guarantee a good abrasive, will not affect the grinding effect. Roller symmetrical structure, one side can be upside down after use and wear. Material grinding process: hydraulic pneumatic roller device through the pressure applied to the material on the crushing of materials, the materials have been moved to crush the edge of disc, from the disc around the nozzle from the exhaust air to improve these materials to Separator.Meal to separate returns after a concentrated mill, fine powder was collected in the precipitator unloading. In the gas flow is small, the meal can not be increased to enhance air flow, they would fall through the nozzle discharged outside the mill, bucket elevator to be transported to the feeder of vertical mill and was re-grinding mill feed people.This cycle features of the way there:ring by adjusting the air valve, can change the product fineness can shide mill bed load material uniformity and stability, improving the grinding efficiency; coarse particles in the external circulation, helps reduce Fan power consumption and overall system power.   Processed Materials : Limestone, calcite, barite, dolomite, potassium feldspar, marble, talcum, gypsum, kaolin, bentonite, medical stone, rock phosphate, manganese ore, iron ore, quartz, active carbon, carbon black, ceramic, clinker, ect. Applications : Cement, coal, power plant desulfurization, metallurgy, chemical industry, non-metallic mineral, construction material, ceramics.  

sany sr80 excavators

DRO Milling Machine, VMC machining center, Vertical Milling Machines

road machinery, Buses, industrial engine, Marine Engine, Trucks

hydraulic excavators, Earthmoving Equipment

Road Construction Equipment, Civil Contractors, patiala pants, Plazzo

milling Machines, ferrous coating additives, non ferrous coating, Milling

mechanical engineering machine

Machine Building Equipment, milling Machines

milling machinery, precision cnc milling machines, Plastic Injection Moulding

Anti Vibration Milling Tools, Mono Block Expendable Reamers

End Mill Resharpening Machine, Carbide Tools, metal band saw blades

cnc milling, Turning, cam programing service