Occupancy Detector
Get Price Quote
5 piece (MOQ)
Power requirement 220 ~ 240VAC / 50Hz Loading 2,000W for resistance2,000W for halogen & incandescent1,500W for fluorescent (T8)Detection Angle 360°Detection Range @2.5m heightF= 6m for micro motionF= 10m for walk across motion Run-on time setting 10 sec. ~ 40 min,Ambient light setting 30 ~ 200 Lux.Operation mode Auto Warm-up time Approximately 1 minute Smart Relay Yes (Ver2.0+)Isolation Protection Class II Water proof IP20 Working temp.-10°C~+40°C Storage temp.-20°C~+70°CPower consumption 1W maximum Dimension (W*L*D)Ф86mm * 74.5mm depth
Wind Speed Direction Modbus
18,000 - 25,000 Per piece
1 Piece (MOQ)
Our Wind Speed Direction Modbus is integrated with latest technology thus ensure better performance. These Wind Speed Direction Modbuses are highly demanded in the domestic market owing to their qualitative features. Avail Wind Speed Direction Modbus at market leading prices. Detail Modbus RS485 data 4- 20 mA /0- 5v retransmission Output Relay control output
Best Deals from Motion Sensor
Flood Sensor
7,000 Per Piece
Pir Motion Sensor
Get Price Quote
10 Piece(s) (MOQ)
We are offering pir motion sensor for lights. As the pir sensor switch can detect the infrared rays released by human body. The light or any other electrical appliance can be activated automatically by the active presence of a human body within the detection range coverage area & when there is no presence the light will be deactivated automatically. specifications: wire: bipolar operating voltage: 100v~265vac (50~60hz) power: 800w ( max ) delay shutdown time: 16~350 sec. ± 30% ( adjustable ) induction angle:140°coning angle lux setting: 5lux ~ 500lux ± 20% ( adjustable ) detecting distance: 7~10 m size: 65mm(h) x 55mm(w) x 30mm(d)
Pir Motion Sensor
815 Per Piece
10 Piece(s) (MOQ)
Wind Speed Sensor
Get Price Quote
Occupancy Sensors
2,500 - 2,875 Per Piece
01 Piece(s) (MOQ)
Motion Processing Unit
Get Price Quote
Outdoor Motion Sensor
Get Price Quote
Pir Motion Sensor
419 Per Piece
Flood Sensor
Get Price Quote
SmartRoom Wireless Flood Sensor uses the liquid conductive principle to detect whether there is water with electrodes and then transfers to a dry contact with a sensor. Alerts will be triggered when the probe detects water higher than 1mm and it can link the Wireless Water Valve to cut off the water supply. It is easy to install and operate and widely applied in kitchen, bathroom, etc.
X-Band Motion Detector
3,700 Per Piece
1 Piece (MOQ)
Microwave Sensor
Get Price Quote
Pir Motion Sensor
550 Per Piece
Microwave Radar Human Motion Sensor
85 Per Piece
1 Piece (MOQ)
pir motion sensors
Get Price Quote
We offer pir sensor switch which can detect the infrared rays released by human body. The light or any other electrical appliance can be activated automatically by the active presence of a human body within the detection range or coverage area. And when there is no presence the light will be deactivated automatically. working principle: - • the pir sensor senses the motion of a human body by the change in surrounding ambient temperature when a human body passes across. • then it turns on the lighting load to which it is connected. • the lighting load will remain on until it senses motion. • once the motion is seized it switches off the lighting load. • during the night, the lux adjustment knob allows you to adjust the luminosity based on which the lighting load will either switch on / off automatically. applications: - • common toilets, for lights & exhaust fans • common staircase / entrance / basements • parking areas / garden lights • living room, malls, atms • changing rooms in shops • offices / conference room • corridors & many more! advantages: - • pir motion sensors will itself recover its cost by reducing your electricity bills and will further save your electricity cost for the future. • very easy installation and can be installed by in – house technician itself. • no separate wiring is required hence no additional installation cost. • no modification is required and complies with current aesthetics. • pay back within ten months according to residential meter and six months according to commercial meter.
Speed Sensors
Get Price Quote
Rotary Electronics offers electronic speed and direction sensors for sensing the Engine speed, vehicle speed and wheel speed for engine management control, vehicle stability control and breaking control. Capable of very low / True speed sensing Direction sensing (Forward / Reverse) Large Operating air‐gap range with stake output Available in 2 wire or 3 wire configuration Temperature range : ‐40°C to +140°C Supply Voltage : 6V ‐ 28V Immune to engine and chassis vibrations Available in customized mounting & connector Configurations to meet end user requirements Clean speed signals thus avoiding any filtration / signal
Barometric Pressure Sensor Module
Get Price Quote
The BMP085 is the fully pin- and function compatible successor of the SMD500, a new generation of high precision digital pressure sensors for consumer applications. The universal C-code SMD500/BMP085 (?BMP085_SMD500_API?) is fully upward compatible to SMD500 and recognizes automatically the device ID. The ultra-low power, low voltage electronics of the BMP085 is optimized for use in mobile phones, PDAs, GPS navigation devices and outdoor equipment. With a low altitude noise of merely 0.25m at fast conversion time, the BMP085 offers superior performance. The I2C interface allows for easy system integration with a microcontroller. The BMP085 is based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. Key features Pressure range: 300 … 1100hPa (+9000m … -500m above sea level) Supply voltage: 1.8 … 3.6V (VDDA) and 1.62V … 3.6V (VDDD) Low power: 5?A at 1 sample / sec. in standard mode Low noise: 0.06hPa (0.5m) in ultra low power mode 0.03hPa (0.25m) ultra high resolution mode < 0.1m possible with software averaging algorithm – Temperature measurement included – I2C interface – Fully calibrated New features Smaller package height 1.2mm Faster conversion time (standard mode each) 7.5ms (max.) Faster I2C data transfer max. 3.4MHz max. Extended min. supply voltage min. 1.8V min. Lower stand-by current (typ.) 0.1?A External clock not necessary Typical applications ? Enhancement of GPS navigation (dead-reckoning, slope detection, etc.) ? In- and out-door navigation ? Leisure and sports ? Weather forecast ? Vertical velocity indication (rise/sink speed)
Wind Speed Sensor
Get Price Quote
We are one of the celebrated manufacturers, importers and traders of an extensive assemblage of Wind Speed Sensor. The proposed collection is manufactured in compliance with the set industry guidelines. Used for the measurement of the speed of the wind, these efficient and accurate sensors are majorly used at major weather forecasting centers. Due to excellent performance, these are vastly applauded. Features Consistent performance Reliable in operation Rugged in construction Output: ( According to Customer Requirement)1. Voltage output Ex: 0 to 5V or 0 to 10VDC2. Curent Output: 4 to 20mA DC3. Modbus Output Attached Cable Length: 40' (12 m) Cable Type: 4-conductor, 26 AWG Connector: Modular connector (RJ-11) Maximum Cable Length: 240' (73 m) Dimensions: 15.0" x 1.5" x 18.0 Range: 250 KPH 0- 360 Deg C Accuracy: ±3 km/h, ±5 %, whichever is greater ±3 Deg C
Flood Sensor
500 Per Piece