Motor Protection Relay Dealers in Bangalore

Features Software based design ‘Block on Start’ feature provides very accurate overload protection Definite time over load protection Locked rotor current protection Single phasing protection Wide setting ranges Draw -out case Principle of Operation: This is a Microprocessor based relay which has been designed to sense the load currents in all the three phases of an AC motor. It monitors the levels of these currents continuously, giving output signals for relay and LED driver circuits.

Taking quality as our prime importance, we are engaged in manufacturing, supplying, exporting and trading Motor Protection Relay . Ideal for motor protection, these relays are manufactured using reliable hardware with special algorithms, which allows to calculate the tripping time. Continuously monitors the three phase currents to build the thermal replica, which is used to protect the motor against thermal overloads, these relays are appreciated for accurate measurements and thermal memory. Features: Accurate measurements Thermal memory Dimensional accuracy Other Details: Selectable Thermal Trip Time characteristics Class - 10A, 10, 20 and 30 Pre-alarm at 105 % of Im by Potential Free Output Contacts Fault records up to Previous 999 faults and 20 Previous On-Board faults with Date and Time stampings IncrementDecrement Key and ModeSet key in front facia Operational and Type Nature of Fault indications through OLED Communication through Modbus protocol with RS-485 Port EnableDisable option for Earth Fault, Under Current, Locked Rotor, Phase Unbalance Protection Various Models with Current ratings Dimensions in mm: 70X75X109 (WXHXL) Operating Temp: 0c to +60c Auxiliary Power Supply: 85-275V ACDC Trip Accuracy: As per IEC 947-4-1Trip Class 10A, 10, 20, and 30 Pick-Up Accuracy: +- 12.5% Specifications: Thermal Over Load Protection: Over Load Current Setting Range 2.0Amps 96.0Amps in 4 ranges as explained in SL.13 Trip Time Characteristics Class 10A, 10, 20 &30 as per IEC 947-4-1 Pre-alarm at 105 % of Im by One set of Potential Free output Contacts Thermal Memory Provision Earth Fault Protection: Earth Fault Current Setting Range10% to 50% of Im, in steps of 1% (20% - Factory Set) Trip Time Delay 0.1Sec to 5.0Sec in steps of 0.1Sec (0.1Sec - Factory Set) EnableDisable Option Phase Unbalance: Unbalance Current Setting Range 10% to 50% of Im, in steps of 1% (40% - Factory Set) Trip Time Delay 0.1Sec to 5.0Sec in steps of 0.1Sec (2.0Sec - Factory Set) EnableDisable

Product Features : Micro controller based motor protection relay. (Panel / Flush mounting.) Parameters: Phase- Phase missing (failure), phase reversal (sequence) and phase unbalance,Voltage – under voltage, over voltage based on 415V AC, Current – Under current, Over current based on nominal current set, Under frequency, Over frequency . earth leakage fault. Relay can be programmed for relay to get energized during healthy or unhealthy condition. Instant values of parameter displayed during healthy status. Reason for tripping displayed during unhealthy status. Unhealthy status will be displayed till the user acknowledges in manual mode. Auto / Manual. Program lock facility available. Bypass of unwanted parameter can be programmed CT primary can be programmed up to 2500 in steps of 5. CT secondary will be factory set for 5. MPR-E1– Panel / Flush mounting Trip delay time programmable for each parameter separately. 415 V AC, 3 Phase, 4 wire Out put : 1 c/o relay.

We are offering micro controller based motor protection relay. (panel flush mounting.) parameters: phase- phase missing (failure), phase reversal (sequence) and phase unbalance, voltage – under voltage, over voltage based on 415v ac, current – under current, over current based on nominal current set, under frequency, over frequency . earth leakage fault. relay can be programmed for relay to get energized during healthy or unhealthy condition. instant values of parameter displayed during healthy status. Reason for tripping displayed during unhealthy status. unhealthy status will be displayed till the user acknowledges in manual mode. auto manual program lock facility available. bypass of unwanted parameter can be programmed. ct primary can be programmed up to 2500 in steps of 5. Ct secondary will be factory set for 5. mpr-e1– panel flush mounting trip delay time programmable for each parameter separately.

RHO 3 is used for protection and management of medium and large motors and driven equipmentIt is Ideally suited for pumps, conveyors, compressors, fans etc.   Standard Features Thermal overload protection (49) Earth fault Protection (50N) Phase unbalance protection (46)

Features Software based design Block on Start feature provides very accurate overload protection Definite time over load protection Locked rotor current protection Single phasing protection Wide setting ranges Draw -out case

Prok dv’s make Microcontroller Based Motor Protection Relay PD-MMPR-303 uses the state-of-the-art Microcontroller based measurement techniques for providing protection for Motors up-to 75HP. The comprehensive protection features of the relay make it ideal for Motor protection. The heart of the relay is microcontroller based reliable hardware with special algorithms to calculate the tripping time. The relay continuously monitors the Three Phase Currents to build the thermal replica of the Motor. This thermal replica is used to protect the Motor against Thermal over Loads.The Microcontroller Based Motor Protection Relay does not require external Current Transformer (CT) for its operation for within the bandwidth of Im ranges. The three phase R, Y and B cables are made to pass through the CT hole which is in the relay. The built in CT’s takes care of stepping down of the Currents to the required level. The stepped down three phase Currents are continuously monitored by the relay to detect any abnormal behavior of the Motor and to make tripping decision. Specification Accurate and Real Time TRUE RMS measurements Motor Rated Current (Im) Selection by means of Pot meter with markings Earth Fault Setting provided by means of Pot meter with markings Selectable Thermal Trip Time characteristics Class - 10A, 10, 20 & 30 I > Thermal over load above105 % of Im - provided through visual led indication Provided the Thermal replica for motor overload condition Continuous monitoring of Motor IDLE/Stop, COLD, WARM, HOT, I> & Various Fault status through visual LED indication Various Models with Current ratings Compact and Reliable Manual TEST / RESET Facility

We are offering motor protection relay. Backed by experienced and expert team we are offering range of motor protection relay

Motor Protection And Control Relay, Fiber Optical Patch Cord

Motor-Pump Protection Relays, loom switches, led module pilot lights