Electric Motors Dealers in Jalahalli, Bangalore

• Phase: Three Phase
• Power (Watts or HP): up to 100 HP
• Size: 19mm to 110mm
• Range: 0.092kw to 55kw

Industrial Hydraulic motors convert the energy in a pressurized hydraulic fluid into useful mechanical energy. Tornado hydraulic motors are fixed  displacement low speed high torque hydraulic motors working on the proven orbit motor principle. The power generating element of this motors is a gerotor set with a lobed stator ring and a rotor with one lobe less than the stator ring. The rotor fits eccentrically inside the stator ring and together they form a number of chambers. In FMP series motors , the stator ring is a specially machined and matched component(fig.1). In other series, the stator ring lobes are formed by rollers located in precisely machined holes in stator rings.The pressurized oil enters the motor through the parts on the body and passes through a distributor valve driven by the rotor , which directs the oil sequentially to the oil chambers in the gerotor set. The pressure differential between these chambers causes the rotor to rotate. The rotary motion is transmitted to the output shaft as well as the distributor valve so as to produce  a continuous rotary output. In FMP series motors the distributor valve is integral with the output shaft, whereas in other series, a hydrostatically balanced disc valve driven by an independent drive link is provided. This design facilitate short flow paths, higher efficiency, wear compensation of valve faces and longer life. CHARACTERISTIC FEATURES     Fit and Forget reliability     High power - to weight ratio     High startup and output Torques     Fully reversible and Variable speed     Uniform torque over a wide range of Speeds     Easily available and economical     Robust and compact design     Long, maintenance free life     Mounting configuration as per SAE standards     Interchangeable with similar imported models APPLICATIONSTorando Hydraulic motors are ideally suited for Applications demanding vary high Torque at low or variable speeds, along with economy, compact size, reliability, maintenance-free service etc. These motors also provide a cost effective alternative to many other variable speed drives in vogue.RECOMMENDED APPLICATION RANGES  Hydraulic fluid Mineral based Hydraulic oil Fluid Temperature 300c - 600c Fluid Viscosity 30cSt - 75 cST Contamination level 25 Micron Filtration of finer INSTALLATIONTornado Hydraulic Motors can be fitted in ny desired position. If a drain line is connected , ensure that the motor case is always filled with oil. DRAIN CONNECTION All models of Tornado Hydraulic Motors are provided with built-in-check valves to limit the pressure on the shaft seal.

We are highly acknowledged organization engaged in presenting remarkable range of Gear Motor. Features: Easy to install Rust free Long service life

• Brand Name: KBK GERMANY,KBK
• Application: ENCODER
• Type: KB2
• Holding Torque: 2 NM
• Country of Origin: GERMANY
• Warranty: 12 MONTH FOR MANUFACTURING DEFECTS
• Material: SS METAL BELLOWS
• ColoR: SILVER
• Size: 25MM OD

Rotolinear systems bangalore can supply KB2 type metal bellow couplings with collet clamp from our STOCK at Bangalore.   The detailed catalouge page will be available in our website rotolinearindia.com . The basic construction of the bellows will be stainless steel and hub will be aluminium( the hub can be supplied in stainless steel also).   rotolinear systems can supply miniature type model KB2 from the stock at bangalore. The leading distributor of metal bellow couplings in india. The couplings shown in the photo is KB2/20-42(  torque: 2 Nm, OD 40.5mm, length : 42mm) which are available in STOCK and can be supplied with maximum bore size of 25mm. Metal Bellows Couplings KB2 Backlash-free miniature metal bellows couplings with clamping hubs For shaft diameters from 1 - 25mm Torque range: 0.1 - 10Nm High torsional stiffness, good compensation of shaft misalignment, low restoring forces Designed for easy assembly / disassembly APPLICATIONS FOR METAL BELLOWS COUPLINGS   ·                   Encoder ·                   Servo Drives ·                   Stepping motors ·                   Machine tools ·                   Wood Working Machines ·                   Packing Machines ·                   Factory Automation Machinery ·                   Positioning Applications     Rotolinear systems are the leading supplier of metal bellow couplings in Bangalore. All the size of KB2 metal bellow couplings are available in STOCK at Bangalore.   Rotolinear systems  www.rotolinearindia.com is the leading supplier of CNC machinery parts in Bangalore. Rotolinear systems are the leading supplier of CNC machine parts like Ground ballscrews, Linear guideways , precision locknuts, metal bellow couplings, taper bush , clamping element, shrink disc, rigid couplings, keyless clampings, locking device, flexible disc couplings, servo couplings, torque limiter, safety couplings, servo insert couplings, planetary gearhead, linear actuator ect.                                  

The electronically commutated maxon EC motors stand out with excellent torque characteristics, high power, an extremely wide speed range, and an outstandingly long life span. The outstanding controllability of the motors makes high-precision positioning drives possible. The economical EC series is called maxon EC-max. When space is at a premium, maxon flat motors are the solution.   ECX SPEED program   The brushless ECX series of motors has been optimized for high speeds (up to 120,000 rpm) and withstands up to 2000 autoclave cycles.   For product details & specifications:

• Type: TRUCKS STARTER MOTOR

The 48v 1200w electric outboard motor generates 5.0 HP of clean energy. Electric outboard motors are absolutely silent, produce no exhaust gases and cause no un-necessary waves. Of course, they are not as lively as fuel driven engines. They are sufficient though for leisurely motion. The energy supply comes from 48v of deep cycle or deep discharge batteries, designed for gradual but continuous discharge. An ordinary car battery is not suited. Depending on speed-setting, a battery charge suffices for several hours of operation. This is the ideal eco friendly 5 HP electric boat motor for small fishing boats & dinghys.   Specifications:  Model: ET1200 Motor type: Brushless Motor Max. Output: 1200w/5.0hp Weight:12kg Speed: 17km/h Gear ratio: 3:2 Rated Rotation: 3000-3700 r/min Rated Voltage: 48V Rated Current: 25AH Control handle: Manual Tilt Start system: Accelerate Switch Propeller size: 7-1/4x5-A inch Transom plate height:420mm Dimensions (L×W× H): 920×365×220mm     Features * Full Digital Battery Indicator& Special Silent Sine Wave Controller * Portable Easy Starting Environmental Protection Quiet Comfortable * Features 360 degree steering rotation for reverse without gear shifting * Start-In-Gear protection/clutch feature prohibits prop rotation while idling * Lift/Tilt feature for shallow water operation and convenience * Superior engine air cooling system for improved engine performance * Easy pull off engine cover with push button latch for instant motor access * Vertical mount engine design for increased power, performance and durability * Superior carbonation system with primer bulb for increased efficiency * Twist grip throttle handle and engine stop button for improved response * Superior outboard anti corrosion system and anodes for increased durability * Durable cast aluminum construction for superior corrosion protection * Through the prop exhaust outlet for decreased noise and pollutants * Heavy duty lightweight aluminum cast propeller standard equipment

Nimble motors can power pan and tilt rotation of various antennaewith high speed and precision. The use of direct drive technologymakes gearbox in such applications obsolete and provides highaccuracy positioning (upto 0.001 degrees) and due to lesser numberof moving parts have inherent high reliability.

The universal motor is so named because it is a type of electric motor that can operate on AC or DC power. It is a commutated series-wound motor where the stator’s field coils are connected in series with the rotor windings through a commutator. It is often referred to as an AC series motor.

AC Drive > MFDDTB3A2 (5KW), Electric Control Panel, Plc Panel

Indramat Permanent Magnet Motor, Fanuc Spindle Amplifier Module

Electric Motors, Transformers, Voltage Stabilizers

water motor, r o systems, Commercial Ro System

vmc with linear motor, Ball Screw Bearings, Farm Machinery

Forklift self starter motor, toyota forklift, forklift key switches

brushed dc motors, 1-Q-EC Amplifiers, Gearheads Motor, spindle drives

Industrial Motors, Linear Actuators, Heavy duty solenoid, Holding solenoids

Axial Piston Motor Type M60n, piston accumulators, Wind Power Service

spider

condenser fan motor, refrigerator components

Motor, battery boxes, Diesel Engine, Fuel Tank, Tool Boxes, Transformer

Electric Motors, Electrical Motor

sew eurodrive brake motor

Crane And Hoist Duty Motor

Hydraulic Motors, Heat Exchanger, Cooling Towers, Gas Scrubbers

Motorized Linear Stages Motor, Laminated Flooring, MANUAL POSITIONERS

Electronic Motors, Control Panels, instrumentation, Electronic Meters