Multistage Centrifugal Pump
Get Price Quote
Horizontal Multistage Pump
5,000 - 10,000 Per Piece
Our RKB series pumps are centrifugal, multistage, vertical delivery, side suction pumps with diffuser type casing. Anti friction bearings support the Steel Pump shaft to ensure higher efficiency and smoother operations. Impellers are enclosed type & radial flow type with balancing holes to ensure longevity and a strong performance. With a standard lubrication of grease they are ideally suited for coupling with electric motors. Pumps are offered in a wide variety of materials of construction. Materials are machined precisely to ensure high efficiency and performance. Suction flange of the pump can be offered in Left or Right side as per site requirements. Pumps are fitted with enclosed impellers. Pumps are available in vertical execution also against specific requirement. These pumps are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings, Booster Service, Mine Dewatering and so on. APPLICATIONS Fire-fighting Booster Service Mine Dewatering Boiler feed Sprinkler Irrigation SALIENT FEATURES Gland packed/Mechanical Seal. Suction flange can be directed left or right. Enclosed impellers. Also available in Vertical execution
Best Deals from Multistage Pumps
Multi Stage Centrifugal Pump
Get Price Quote
We are offering multistage centrifugal pump test rig: a) the test rig consists of a 2-stage centrifugal pump set suitable for determining its characteristics at its rated speed. The test centrifugal pump is of 1.0 hp capacity of size 25mmx25mm(1"x1"). The pump is powered by 220 volts, single phase, 50hz. A stop watch and an m.s. Collecting tank of size 150 liters. With a gauge glass scale fitting, a drain valve and a bend are provided to measure the actual flow rate. An energy meter is provided to measure the input power to the pump set. B) other standard accessories include switch, flow control gate valve, foot valve and piping system with suitable pressure taps to fix the pressure and vacuum gauges. C) a sump tank of size 250 liters with suitable drain is provided to store the water.a strong iron stand fitted with wheels supports the complete test rig. The unit is moveable. All tanks are provided with frp lining for total rust protection.
Multistage Booster Pump
Get Price Quote
We are the main supplier of this product.
Multistage Vertical In Line Pumps
Get Price Quote
Vertical multistage centrifugal pumps with in-line design enable the pump to be installed in a horizontal one-pipe system where the suction and discharge ports are in the same horizontal plane and have the same pipe dimensions. Vertical Multistage Pump comes with various sizes and various numbers of stages to provide the flow and the pressure for different site conditions. Vertical multistage pump is suitable for a wide variety of applications from pumping of potable water to the pumping of chemicals. Operation Condition Max Head : 94 M (1292ft) Max Capacity : 40 m3hr Operation Condition Max Head : 94 M (1292ft) Max Capacity : 40 m3hr Temp of Pumped Liquid : 0oC to 35oC Frequency : 50 Hz Rpm : 2900 Max pressure : 25 bar 0oC to 35oC Frequency : 50 Hz Rpm : 2900 Max pressure : 25 bar Pumps Construction Coupling spider : Cast iron EN-GJL-250 Basement : Cast iron EN-GJL-250. Tube : Stainless steel AISI304 Diffuser : Pressed stainless steel AISI304 Impeller : Pressed stainless steel AISI304 Shaft : Stainless steel AISI431 Bidirectional mechanical seal : Graphite SiC EPDM On request, AISI 316 and SS Duplex can be given instead of AISI304 & AISI431 respectively. Features Thrust bearing included in the pump : pump series MK are equipped with a bearing necessary for supporting the axial thrust generated by the pump. This allows to couple to the pump, the standard normalized motors without turning normalizing motor equipped with axial bearing. Normalized mechanical seal : mechanical seals are according to UNI EN 12756 rules. This allows an easy availability in case of need. Shafts supported and guided by bushings in wear proof material Double wear ring : Diffusers equipped with double wear ring in self-lubricating material (Teflon for MK32-40 bronze for MK50-65) Wide range : 11 families for power up to 37kw available with different shapes, metallurgies and motors Version with frequency converter (up to 5,5kW) Diffuser equipped with wear ring self-centering Cover: cast iron EN-GJL-250 Pump equipped with thrust bearing
CM BOOSTER
Get Price Quote
SUMMARY Grundfos CM multi-stage pump has been created with compactness and modularity as two of its central features. Silent operation, compact design and high reliability are its key features. DESCRIPTION The CMBE Booster is designed for domestic and commercial water supply, pressure boosting, irrigation and dewatering applications. The CMBE series is available in both 1x110-120V and 1x200-240V variants and uses energy efficient, permanent magnet motor technology, which provides unmatched reliability, quiet operation, and energy savings. Thanks to the integrated speed controller, the CMBE keeps a constant pressure in the pipe system. A pressure sensor monitoring discharge pressure will signal to the speed controller to change the motor speed to adapt the performance to the new situation. BENEFITS Features: Constant pressure via integrated speed control Compact design Robust, stainless steel design Easy installation Low energy consumption Dry-running protection Noise level below 55 dBA and even lower at controlled speed The CMBE Booster is a complete pump system preassembled with the following components: CME pump with integrated frequency converter 5-way fitting with non-return valve Diaphragm tank Pressure gauge Pressure sensor The simple control panel features the GRUNDFOS Eye that indicates system status, warnings and alarms. Adjusting to the desired setpoint is easy using the one-touch control buttons. The light fields on the control panel will indicate the setpoint setting.
Horizontal Multistage Pump
Get Price Quote
Our RKB series pumps are centrifugal, multistage, vertical delivery, side suction pumps with diffuser type casing. Anti friction bearings support the Steel Pump shaft to ensure higher efficiency and smoother operations. Impellers are enclosed type & radial flow type with balancing holes to ensure longevity and a strong performance. With a standard lubrication of grease they are ideally suited for coupling with electric motors. Pumps are offered in a wide variety of materials of construction. Materials are machined precisely to ensure high efficiency and performance. Suction flange of the pump can be offered in Left or Right side as per site requirements. Pumps are fitted with enclosed impellers. Pumps are available in vertical execution also against specific requirement. These pumps are ideal for sprinkler irrigation, fire-fighting, water supply in high rise buildings, Booster Service, Mine Dewatering and so on. Fire-fighting Booster Service Mine Dewatering Boiler feed Sprinkler Irrigation Gland packed/Mechanical Seal. Suction flange can be directed left or right. Enclosed impellers. Also available in Vertical execution
multi stage pumps
Get Price Quote
Typical Applications • For boiler feed water service, for main and auxiliary condensate extraction, for general water and fire-fighting systems. • For any clear liquid high pressure applications MOC • Cast Iron, SS304,SS316,Bronze,CD4MCU,Alloy 20
Multistage Pump
3,500 - 4,000 Per Piece
Vertical Multistage Pumps
Get Price Quote
Vertical Multistage Pumps, In-line Pumps. These pumps are used in applications such as water transfer, fire fighting, DM Water, Reverse Osmosis (RO) plants, chilled water circulation, cooling water, hot water circulation. Pumps find applications in Marine and Defence, Oil & Gas, Building & Construction, Pharmaceutical, Distilleries & Breweries, Sugar, Food and Process, Cement Industry segments as well. FEATURES Pressed stainless steel components Very high efficiency and low NPSH All wetted parts in SS304 or SS316 Mechanical Seal 50Hz /60Hz availability APPLICATIONS Booster, Firefighting ,HVAC, Boiler feed, Condensate / DM water, Water purification, Food, Pharma sectors, Reverse Osmosis, Water treatment, Pressurised cleaning systems, Drip and sprinkler irrigation. APPLICATIONS Booster, Firefighting ,HVAC, Boiler feed, Condensate / DM water, Water purification, Food, Pharma sectors, Reverse Osmosis, Water treatment, Pressurised cleaning systems, Drip and sprinkler irrigation. RANGE Delivery size up to 100 mm Capacity up to 75 m³ /hr Head up to 220 metres Temperature (-) 15 degree C to 120 degree C
Vertical Multistage Inline Pump
Get Price Quote
Multistage Pumps
Get Price Quote
We are Offering Sumo / Calpeda Multistage Horizontal and Vertical pumps suitabel for Mineral water plants, RO Systems, STP, Boilers, Chillers etc.
Multistage Close Coupled Pump
16,500 Per Piece
Multistage Horizontal Centrifugal Pumps
Get Price Quote
The Multistage Horizontal Centrifugal Pumps represent the latest design in hydraulic technology. It generates a very good pressure and at the same time a high flow with low power consumption and with low noise. These are suitable for pressure boosting, irrigation purposes and for process water transfer and general industrial applications.
borewell
Get Price Quote
borewell, borewell drillers
borewell
Get Price Quote
borewell, White Cement, Water Tanks, Water Pumps, water motors, PVC Pipes