Pneumatic Tools Dealers in Hosakerehalli, Bangalore

  This is similar to a conventional spray gun using a compressor to supply the air, but the spray gun itself requires a lower pressure (LP). A higher volume (HV) of air is used to aerosolise and propel the paint at lower air pressure. The result is a higher proportion of paint reaching the target surface with reduced [[overspray]], materials consumption, and air pollution. A regulator is often required so that the air pressure from a conventional compressor can be lowered for the HVLP spray gun. Alternatively a turbine unit (commonly containing a vacuum cleaner derived motor) can be used to propel the air without the need for an air line running to the compressor. HVLP turbines supply air at a much lower velocity producing a softer, easier to control spray. This allows you to lay the paint on gently and not blast it on. Benefits of HVLP include less overspray and less paint wastage. Transfer efficiency can be as high as 85%. The quality of finish is identical to the best high pressure spray finishes.

• Weight: 2680 kg
• Hole range: 102-115 mm
• Hole Depth: 50 feet (15 mtrs)
• Compressor: 450 cfm/150 psi
• Pneumatic Drifter Drilling: 48-76 mm
• Mounting: Crawler
• Speed: 3.5 km/hr
• Rod length: 3 mtr
• Feed: Chain feed driven by air motor & gearbox
• Boom Lift above center Line: 45°up, 30° down
• Boom Swing: 45° right, 45° left
• Drill Guide Swing (Horizontal): 45° right, 45°left
• Drill Guide Tilt: 75°
• Overall length: 5,100 mm
• Overall Width: 2000 mm
• Height Tramming: 1780
• Ground Clearance: 254 mm

• Features: Compact design, Longer working life, Quality tested

• Voltage: 220-240V
• Brand: FERM
• Frequency: 50Hz
• Gross Weight: 0.90
• Air temperature position I: 50 DegreeC (250L/min)
• Air Temperature Position II: 50 Degree-450 DegreeC (250L/min)
• Air Temperature position III: 90 Degree-600 DegreeC (500L/min)
• Power input: 2.000W
• Features: Safe use due to overheat protection, Ceramic heating elements 

• Type: Air Riveter
• Application: Industrial
• Weight: 1-2 Kg, 2-4 Kg, 4-6 Kg
• Color: Multicolor
• Feature: Compact Design, Easy To Use, Light Weight
• Voltage: 110V-240V
• Condition: Good, New
• Warranty: 1 Yr
• Air Pressure: 50-60psi, 60-70psi, 70-80psi, 80-100psi

• Warranty: 1 Year
• Weight: 0.412 kg
• Brand Name: Atlas Copco
• Drive Size: 1/4 Inch
• Torque range max: 1.569 Nm
• Motor power: 60 W
• Sound pressure: 67 dB(A)
• Free speed: 1000 r/min

We sell only high-quality but affordable pneumatic strapping tools for PET (polyethylene) and PP (polypropylene) strap for all kinds of sizes from 13 till 19mm. Pneumatic banding tools have ISO and other needed certificates. All pneumatic strapping tools have a 12-month warranty. Service is in India. If something is wrong with the pneumatic strapping tool we perform a service and send you a replacement pneumatic strapping tool for that period.

• Features: Fine finish, High strength ,Efficient working

• Features: Solid body concept, Noise reduction, Hand and Arm protection system , two-step triggerIntegrated lubricator, Air cushioned piston
• Service Weight: 28.5 kg
• Oil Flow: 20 l/min - 25 l/min
• Working Pressure: 100 bar - 140 bar
• Back Pressure max: 15 Bar
• Torque: 65 Nm
• EHTMA class: C
• No Load Speed: <1200 BPM
• Air Pressure: <30 psi
• Brand: Atlas Copco
• Rock Drill Type: Surface Rock Drill
• Weight incl Hoses: 26 kg

Pneumatic Power Tools, carbide tipped saw blade, Measuring Instruments

Nut Runner for Cylinder Head Tightening Bolts, Ball Pressing Equipment

Plastic Spray Gun