Pneumatic Tools Dealers in Peenya Industrial Area, Bangalore

• Type: coil nailer
• Brand Name: jit korea
• Shank Diameter: piain ring scrwe
• Model Number: jn55c
• Place of Origin: korea
• gree: red

jit coil nailer made in korea jn 55c jn 70c jn80c jn100c stepler coil nails nails remover manufacturer coil nails

• No-load speed: Power mode 0 - 2,600/min / Save mode 0 - 2,000/min.
• Brand Name: Hikoki
• Battery Voltage: 14.4V
• Weight (Kgs): 1.6kg (3.5 lbs.)
• Capacity: Bolt 10 - 16mm (3/8 - 5/8
• Drive: 12.7mm (1/2
• Torque Setting: Power mode 235Nm (2,080 in.-lbs.) / Save mode 130Nm (1,150 in.-lbs.)
• Model: WR14DSDL

• Brand: Hitachi
• Capacity Bolt: 10- 16 mm (3/8 - 5/8 inch)
• Capacity High Tension Bolt: 8- 14 mm (5/16 - 9/16 inches)
• Battery Voltage: 14.4 V
• No Load Speed Power mode: 0 - 2600/min.
• No Load Speed Save mode: 0 - 2000/min.
• Full Load Impact Rate: 0 - 3200/min.
• Overall Length: 173 mm (6 - 13/16 inches)
• Weight: 1.6 kg (3.5 lbs.)
• Standard Accessories: Battery (BCL1440 or BCL1430), Charger (UC18YRL), Carrying Case
• Product Code: WR14DL2
• Drive: 12.7 mm (1/2 Inch) Square Bit Shank
• Tightening Torque Power mode: 235 Nm (2,080 in.-lbs.)
• Tightening Torque Save mode: 130 Nm (1,150 in.-lbs.)
• Features: High capacity 4.0Ah Lithium-ion battery provides longer runtime per charge than 3.0Ah Lithium-ion battery. LED light on body. Two combinations of battery and charger.  

Ionising air nozzles provide a shower of ionised air to remove electrostatic charges and/or clean parts and components. The Valstat® IN 10 ionising air nozzle has ionising (ionizing) electrodes positioned in the air flow path, which convert ordinary compressed air into an ionised air shower. Positive and negative ions in the shower of air effectively neutralize electrostatic charges on the target and the air shower also cleans the target. This is useful in applications where sheets, bottles, containers, components made of plastic or paper are manufactured or processed. The Valstat® IN 10 G ionising air gun is also offered by Valence; the IN 10 G is a combination of an air gun and an ionising air nozzle. Electrical input to Valstat® ionising nozzle and air guns is from a Valstat® PS 70 R power source. Air inlet is to be provided from the shop floor compressed air source Stable HV output, with in-built current limit 230 V, 50/60 Hz, single phase input Standard 3 m HV interconnecting cable with HV connectors Compressed air input up to 30 psi Quick coupler – 6 mm – 30 psi compressed air input Engineering plastic with epoxy mould construction Compressed air input through R1/4 pipe thread Shock-less; no damage when electrodes are earthed Three HV output connectors Compact, dust-proof, and rugged construction 2 m input cable with built-in fuse and power switch Mild steel fabricated, powder coated enclosure

• Type: Spray Gun
• Working Pressure: 40 psi
• Handle Material: SS
• Nozzle Size: 1.4 mm
• Cup Size: 600 ml

• Features: Smooth performance, Longer operational life, Require less maintenance.

Rock Tools India offers the best rig and hammer spares for a safe and excellent performance. spares manufactured by us are a result of high quality raw materials, years of experience & expertise. We are one the most preferred exporters of all types of rig spares such as hydraulic pump, hoses, motors, rotary head (RH) assemblies, cylinders, valves, rotary head spindle, rod spanner, break out wrench spanner, shafts, transfer gearbox (TG) assemblies, oil seals, seal kits, pullies, rod carrier, bearing, etc.

Our team of quality analysts strictly tests each product against varied quality parameters ensuring zero defects at buyer's end. Supported by an industrious network, our organization is able to serve to patrons all over Bengaluru(India) and other marketplaces without problem.

Pneumatic nailers use compressed air to power the tools. For the last few decades,  they have been a mainstay in shops and on job sites all across the country. Pneumatic nailers have been developed for every phase of construction from framing and sheathing to roofing and finishing. Pneumatic nailers have very specific requirements for their fastener arrangements. Fastener magazines can be configured as either coils or sticks. Coil magazines hold many more fasteners without reloading. Stick magazines come either as straight or diagonal configuration, and the collation (the way the nails are attached to each other) can be paper, plastic or wire depending on the brand. Ring’s End carries a variety of nailers from a wide selection of manufacturers, as well as the fasteners for each of those nailers. A pneumatic coil nailer comes in handy for work on the roof. This is a small pistol-shaped tool that helps you drive in fasteners. It is also known as a roofing nailer due to its heavy application in roofing jobs. The nailer is also useful for jobs on exterior drywall. Regular roofing nails cannot be used in the nailer but you must use nails that come on a coil. Although various tools are involved in roofing projects, the coil nailer has several advantages as outlined below.   Ease of Use The coil gun is a small, compact tool. This makes it easy to work with. It also assists in portability. When you have to work in confined spaces, the small size of the tool makes it easier to operate. It eliminates much of the effort and strain associated with a hammer. You need not exert yourself as much physically. This reduces the incidence of fatigue. Most models of the coil gun incorporate an ergonomic handle. This gives you the best grip as you work. It also allows you to work more comfortably.   High Performance The coil nailer is a pneumatic tool fuelled by compressed air. This gives it a high power output. It allows you to drive in fasteners into shingles much faster than using a hammer. Besides the speed, it also does an accurate job. Once installed, fasteners remain securely in place. You’re unlikely to do repair work soon if a coil gun is used for the job. This contributes to the longevity of your roof. However, if a hammer is used, not only is more time and effort called for, but the shingles may not remain secure for long.   Versatile Most pneumatic coil nailers have a depth-of-drive dial feature which allows you to select the desired depth for the job. Whether you need to countersink the fasteners, shallow drive or to flush mount, the coil gun makes it easy to do so. Most models accept nails that vary in length. These may range from ½-inch to under 2 inches. It gives you more flexibility in your work. Many models also have a zero nail lockout feature which keeps you from dry firing once the magazine is empty. Skid plates on the tool help keep the tool in place when placed on the roof.   High Holding Capacity The pneumatic coil gun has a higher holding capacity for fasteners than most tools. The magazine can accommodate up to 150 coil nails. Once fully loaded, you won’t have to reload frequently. This causes fewer disruptions as you work. It reduces on downtime and helps sustain your focus. The tool lets you know when you need to reload. Not much time and effort is involved when you have to reload. This contributes to the smooth flow of work. It also enables you to complete work faster.   Durable The pneumatic nailer is a dependable tool for roofing work. It has minimal maintenance requirements, which adds to its durability. When well taken care of, the tool can last several years in good condition. Pneumatic nailers have the housing made of durable metal such as magnesium or aluminum which adds to durability.

• Color: Black
• Material: Plastic, Metal
• Application: Car Washing
• Weight: 0.83 kg
• Cleaning: Cold Water Cleaning
• Temperature: A60 deg C-140 deg F

Marson® brand offers a full line of blind rivets and threaded inserts in a wide variety of materials. Products include standard open-end rivets, as well as Specialty Rivets, including Closed-end, Multi-Grip and Plastic rivets. Threaded Inserts round out the product line, complimented by a full array of Manual and Air Tools. Many fasteners are offered in kit form with tools as well!

Hi we are the sole supplier of pepper gas spray in india.

high pressure spray guns, Powder Coating System

cordless impact wrench, Cordless Angle Grinder, Cordless Driver Drill

Spray Guns, Spray Nozzles, automated spray system, Heated Spray System

Air impact hammer, Sand Rammer, Pneumatic slides

Pneumatic Dampers, Dust Removal System

We deals in supplying of wide range of Pneumatic Tools.

pneumatics tools, Hydraulic Power Packs, Lubrication Equipment