Power Meters Dealers in Bangalore

single device for measuring electricity, gas & water consumptions. This works with the integration of gas and water with the electrical parameters thereby, extending the flexibility for the user to budget expenses.     Brand Name : Elmeasure Display Type : LED Phase : 1 Color : Grey

• Country of Origin: India
• Type: Run Hour
• Application: Energy Monitoring
• Voltage: 85 - 270V AC/DC
• Automatic Grade: Automatic

invendis et2081 ac basic, class 1.0, 85 - 270v ac/dc, 415/110 v, 3 phase, 5a, 3 r 3 digit 0.56", v,a,hz,rpm,rhrs, alt & engine loading  panel meter (96x96mm), for measuring voltage, current and frequency, 5a secondary, ct primary programable, with run hour and prm, for genset (dg)application configuration; 3 phase, 3 element, 3/4 wire nominal: 415v lt or 10v through pt input current: factory set                                                                                                               computation: true rms for ac parameters isolation: 2000\ac for one minute  safety: measurement category iii, pollution degree 2 as per en61010-1 first edition temperature: 0-50c humidity:

• Features: 10000 Count digital display, 4 feet Drop Proof, Temp. Adaptor bead probe included, Deluxe Carrying Case, Hand Guard & Stream Line Designed, Convenient Battery Door
• Conductor: Up to 42mm dia. (1000MCM) Conductor
• Bus bar size: 62mm x 12mm
• Drop Proof: 4 feet

Simultaneous & instantaneous measurements of value, electric energy, demand, harmonics and voltage fluctuation Simultaneous measurement of loads in 4 systems Measure up to 50th order harmonic Long time data logging using Compaq flash memory

• Brand Name: Schneider Electric
• Material: New

The meter will measure Energy, Active and Reactive Power, Voltage, Current, Frequency, Power Factor and up to the 63rd Harmonic. Include 1.1 MegaBytes of memory ...

• Brand Name: Elmeasure
• Display Type: LED
• Phase: 1
• Color: Grey

single device for measuring electricity, gas & water consumptions. This works with the integration of gas and water with the electrical parameters thereby, extending the flexibility for the user to budget expenses.

• Brand Name: Joinwit
• Weight: 200 g
• Model No: JW3208
• Wavelength Range: 800 to 1600 nm
• Detector Type: InGaAs
• Measurement Range: 60 to 70 dB
• Operating Temperature: 10 to 60 degree C
• Storage Temperature: 25 to 70 degree C
• Operating Time: 130 hr
• Battery: 3 AA1.5V

• Brand Name: Deviser
• Weight: Less than 300g
• Usage/Application: Optical Power measurement
• Detector: InGaAs
• Dynamic Range: -70
• Calibrated Wavelength: 850 / 980 / 1300 / 1310 / 1490 / 1550 / 1610 / 1625 / 1650nm
• Connectors: FC / SC (default); ST / LC (optional)
• Dimensions: 185mm x 85mm x 45mm

Shaft Powermeter to monitor for propeller shafts, engine shafts and auxillary shafts. Accurate reporting of Shaft Power, Torque and RPM. Shaft Diameters from 100mm up to 1000mm  

• Rated Power: 230 Volts AC, 50Hz, mains supply
• A/C output: BNC Connector for amplified output
• Input Connector: BNC(F)
• Frequency: 1000Hz +/- 10%

VSWR meter is a high gain, Voltage Amplifier tuned at the centre frequency of 1 KHz. It is used for measuring voltage standing wave ratio, attenuation and total mismatch on the line

• Brand Name: Schneider
• Display Type: Backlit LCD
• Power Consumption: 10 VA at 415 V
• Line Rated Current: 1A to 5A
• Poles Description: 1P + N, 3P, 3P + N
• Network Frequency: 50Hz/60Hz
• Usage/Application: Industrial
• Model: METSEPM5340

ESD events (Discharge) detection in HBM, MM,and CDM: Detects ESD events and locates their sources; Measures the magnitude of individual ESD events; Counts ESD events; Logs ESD events with their magnitude and timedate stamp for generating ESD environment diagrams and records; Lets you listen to ESD event "crackles" via internal speaker or optional headphones. ESD events (Discharge) detection in HBM, MM,and CDM: Detects ESD events and locates their sources; Measures the magnitude of individual ESD events; Counts ESD events; Logs ESD events with their magnitude and timedate stamp for generating ESD environment diagrams and records; Lets you listen to ESD event "crackles" via internal speaker or optional headphones. Features :ESD Event detection in Human Body Model (HBM), Machine Model (MM) and Charge Device Model (CDM). Electromagnetic field measurement. RF signal measurement. Comes in 1 KV and 20 KV model.

• Voltage: 30V

Measures DC Power and shows totalized Ampere Hour and Watt Hour.LCD Screen 16character x 2 line.Powered by load or source.Great for totalizing power to battery from AC Charger or Solar source or measuring UPS power consumption.

The 3-Phase Power Monitoring system is a digital signal controller based system that can be used to analyze and record the power line signal going out of a power source. The system is capable of measuring non-sinusoidal voltage and current wave forms containing high harmonics. The instrument is used to measure and compute the Power, RMS Value of current, Power Factor as low as ±0.1 and communicates these parameters to the remote PC through MODBUS on RS-485 network.  

We make sure that there will be no damage at customer's end and thus we store the entire lot of products under a secured roof of our capacious warehouse. Also, our experts keep a stringent check on the same. Designed and developed using the premium raw material and modern work methods; we guarantee high quality standards and longevity of our products. Also, we make sure that the raw material is sourced from the trusted places.

1.Meteorology application2. Agriculture application3. Physics & optical laboratories4. Solar radiation measurement5. Solar trans mission measurement6. Solar power research7. Identify high performance windows8. Helpful to set up solar pv panels at optimum angles of incidence9. Light intensity measurement for the car windows Range:2000 w/m2 , 634btu/(ft2 x h)

Designed for fast measurement of timber (up to 180 mm thick), particleboard and veneer. Ideal both for single and series measurements before, during and after processing wood. Measuring Range : 4 to 60 % m.c., with correction facility for your groups of wood and automatic temperature compensation, display by digital LCD readout Principal Features and Technical Data :• Handy quick moisture meter for fast single and series measurements.Size : L 140 mm × W 90 mm × H 42/50 mm. Weight : 220 g without accessory.• Direct reading by digital LCD, Resolution : 0.1 % m.c.• Wood species selector for automatic correction of readings, for over 300 species of wood.• Automatic compensation of influence of wood temperature between –10 and +40°C.• Fully automatic instrument setting – no manual adjustment necessary.• Power Supply by 9V dry cell or, optionally, Ni-Cd accumulator.

• 12V and 24V: Up to 60A
• Simple to connect and setup: Available with wires instead of connectors

The SPM- 1500 and SPM-3000 Solar Power Meter measures and calculates electrical parameters for Solar Installations. Find the Voltage, Amps and Watts that is generated in REAL TIME to validate your Solar Panel AND know when to CLEAN your panels when the Amps drops. Find the Voltage Minimum. This value shows when your inverter or UPS cut off due to battery low. This will help save your battery from deep discharge and a short life. Find the Peak Amps. The peak Amps shows the maximum value ever generated by your Solar panels. Watch the Ampere Hour increment in real time. See how fast your battery is charging. You can get a good idea of your battery condition by looking at its charging rate in real time. Features • Measures energy (Wh), charge (Ah), power (W), current (A) and voltage (V) • Accurate & precise – 0.01 A current and 0.01 V voltage resolutions • Measures peak Amps, peak Watts and voltage minimum (droop) • Rugged – handles 50 A continuous and 60 A peak at 30 60 V • 2.5SqMM multistrand insulated wire flying leads connect to input and output • Small & light with a tough plastic case • Acts like a wire so doesn't affect load performance. Precision Alu-Chrom current sensing resistor, with only 0.001 Ohms resistance and circuitry that draws only 17 mA • Factory calibration stores constants in EEPROM to compensate for component tolerances • Powerful, 8 MIPS micro-controller • Made in INDIA to quality standards • One-year warranty and complete user manual Watch the Watt Hour in real time. See how much your load is consuming in real time.

• Features: Robustness, Compact size, Long functional life

Mag-Tec It is a Tangential Field Strength Meter designed to measure magnetizing field levels aimed at Magnetic Particle Inspection (MPI) and for use with Magnetic Bench units. The meter can be used to measure AC, DC, half wave DC or more complex magnetizing waveforms. Complies with the standards ASTM E1444M & ISO 9934-3

Well trusted, highly rugged, very fast, on line Power Capacitor, Capacitance & tan d meter for final checking of LT power capacitors. High Accuracy meter serves almost all Power Capacitor Industries in India. Fully Automated system for man free operation is also available.  

• Application: Industrial, Laboratory, Domestic
• Brand Name: Magnum Switchgear
• Model: M19, M27

Range: Volts up to 500V Amps up to 60A Frequency: 50-60 Hz

• Type: Dc Watt Hour Meter
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Red, White
• Display Type: Digital
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Body Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Multi Jet, Stable Performance
• Warranty: 1Year

Optical Power Meter

Electronic Meter

Optical Power Meter, rotary piston flow meter, true rms multimeter

digital auto rickshaw electronic meters, auto rickshaw meter

Electronic Meters, Electrical Components

Electronic Energy Meter, Electronic Equipment, Electronic Products