Power Panels Dealers in Bangalore

• Country of Origin: India
• Size: Multisizes
• Type: Power Control Panel
• Color: Brown, Grey, White
• Voltage: 110V, 220V
• Body Material: Mild Steel
• Power: 1-3kw, 3-6kw
• Power Source: Electric
• Phase: Double Phase, Single Phase
• Warrenty: 2 Years
• Autoamatic Grade: Manual
• Brand Name: ADITHYA
• Application: CONTROL PANEL
• Grounding: YES

• Country of Origin: India
• Phase: Three Phase
• Automation Grade: Semi Automatic
• Color: Gray
• Brand: Unnatthi Control & Equipments
• Material: Mild Steel
• Rated Voltage: 440V
• No. of Doors: Single Door
• MCB Count: TPN
• Number Of Ways: 12 Way
• IP Rating: IP44
• Mounting Type: Horizontal
• Current: 2000 Amp

• Material: Mild Steel
• Power: 1-3kw
• Power Source: Electric
• Phase: Double Phase, Single Phase
• Warranty: 1 Year
• Autoamatic Grade: Automatic
• Country of Origin: India
• Voltage: 415 Volt (V)
• Frequency (Mhz): 50 Hertz (Hz)

• Dimensions: W900 x D1450 x H2400 mm
• Rated Current: 630A, 800A, 1250A, 2000A
• Supply Voltage: 22 kV
• Short Time Current Rating: 26.3, 40 kA
• Breaker: Vmax (31.5 kA and below) and VD4 for 40 kA
• Panel Model Power + V2: VCB Indoor Panel
• Degree of Protection of Panel: IP4X, IP5X
• Bus Bar: Electrical grade Aluminium or 99.9% Oxygen Free Copper

The Power +2 is a medium voltage panel. Its features are as follows. Modular and compact for better strength and flexibility in extension. Fully compartmentalized construction for optimal safety and protection. Special bus raiser panel provided with bus coupler panel extended in the rear side for compactness in panels rated up to 2000A. IP4X degree of protection provided externally and IP2X between compartments. Design that ensures adequate space for large cable sizes. Larger cables and additional runs rear extension are also provided for cost effectiveness. Independent exhaust vents for all HT compartments to ensure natural cooling and exit for any flue gasses. General Features: Modular & compact for better strength and flexibility in extension. Fully Compartmentalized construction for optimal safety and protection For compactness in panels rated upto 2000A special bus raiser panel is provided with bus coupler panel extended in the rear side. IP4X degree of protection is provided externally & IP2X between compartments. Our design enables adequate space for large cable sizes. Even larger cables and additional runs rear extension is provided for cost effectiveness. Independent exhaust vents for all HT compartment are provided for natural cooling and exit for any flue gasses. Dedicated Circuit breaker compartment as per internationally proven ABB design. Cassette mounted ABB Circuit Breaker with draw out feature for easy maintenance and fail-safe safety. Live parts covered by automatic metallic shutters when breaker is racked out. Electrical anti-pumping design avoids mishaps due to mishandling of the breaker. Additional feature includes a separate Racking in/out mechanism which is provided in the breaker which can change from “test” to “service” positions and vice versa with the cubicle door closed. Only Branded and type tested sub components are used in our panels. Current and Voltage transformers are placed in chamber below Circuit breaker to avoid any kind of flashovers which may damage the breaker. Wiring done with flexible copper cable affirming to IS 694 for Longitivity and Durability. Optional integral earth switch can be provided on the cable side for Earthing. We provide Foundation frame as standard supply All hinged doors are provided with gaskets to keep away dust and water from the electrical components. Multiple guides are provided for safe and sure engagement of fixed and moving contacts. Breaker trolley shall be given along with the breaker panel for maintenance. Special Features For Outdoor Kiosk Panels: Kiosk Type construction With Double door in the front shall be provided. Rear door is both hinged and bolted for safety. Adequate slope given on top roof to drain rain water, dust & Particles. Robust weather & dust proof – IP5X degree of protection externally & IP2X between compartments.   Our Design Standards: Breaker IEC 62271-100 Current transformer IS 2705/1992 and IEC 60044-1 Potential transformer IS 3156/1992 and IEC 60044-2 Busbar IS 5082 for Aluminium Sheet Steel: IS 513 Cables IS 694

2500 KVA power transformer and allied control panel Quantity – 1 Colour - Green Make - 2019 Condition of Machinery –Good & running condition. Original Price- Rs. 35,48,386/- Expected price – Can be negotiated once machinery is finalized.

• Product Name:PCC: Sheet metal 1.5 mm thick, powder coated to RAL 7032
• Industrial use: 2500A 415V, 3phase system
• Major components: Schneider Electric: Form -4 construction

Power control centre, 2500A 3phase customized as per requirement. As per IEC 61439, with incomer as ACB OR MCCB AND outgoings as MCCB,s. panel construction: compartmented type form-4 construction 

Wè provide high efficiency off grid solar power panelsfor your house, industry. need based solutions are executed based on your requirements. n choice.   Additional Information : Minimum Order Quantity: 1 Kilowatt

• Body Material: Mild Steel
• Size: Multisizes
• Autoamatic Grade: Automatic
• Application: Industries

• Feature: Advanced microprocessor for Power factor Control.

APFC provides compensation for reactive power based on the variations in load conditions to maintain the target power factor. In APFC switching the capacitor is significant as it helps to retain the power factor, the switching is controlled by a Power Factor Controller device that uses the CT feedback to determine the kvar required at any instant. The Power Factor Controller also provides information on the network characteristics such as Active, reactive power, Voltage, power factor for the user to understand. The system generally comprises of Power Capacitors, Controller, firing circuits.The switching system for this depends on the type of compensation.

The switchboards are totally enclosed, floor mounted, free standing Cubicle type, Dust and Vermin proof, readily extensible on both sides with compartmentalized design made up of requisite vertical sections, which when coupled together shall form continuous dead front switchboards suitable for operating on 415 Volts 3 Phase 4 wire 50 Hz AC Supply to withstand 50/75KA fault level or even more as per customers requirement. Control Power Supply of the switchboards is 240 Volts, 1 Phase, 50 Hz AC supply are as per customer requirement conforming to IS 8623 (Part I) 19937 & IEC 60439 Part 1 -1985. The switchboards are designed for operation in high ambient temperature and high humidity tropical atmospheric conditions, with access to the feeders, busbars, cable alley from front to facilitate ease of inspection, cleaning and repairs, for use in installations where continuity of operation is of prime importance. The Switchboards manufactured by us will comply with all de-rating factors necessary to all Switchgear components and the busbars of the Switchboard complies with the conditions detailed in the specifications. The switchboards is constructed with materials of best quality of CRCA sheets capable of withstanding the mechanical, electrical and thermal stresses as well as the effects of humidity, which are likely to be encountered in normal service. All insulating materials used in the construction of the equipment shall be non-hygroscopic duly treated to withstand the effects of high humidity and high temperature tropical ambient service conditions. Doors, side covers, top and bottom sheets are provided with EPDM Profile gaskets to make the panel dust and vermin proof. All doors/covers providing access to live power equipment / circuits shall be provided with tool operated fasteners to prevent unauthorized access. GENERAL TECHNICAL SPECIFICATIONS FOR DISTRIBUTIONS & CONTROL PANELS ensure service continuity to IEC/AS 62271-200  guarantee high degree of operator safety enhance easy installation and reduced construction costs adapt to future arrangement and extensions on both sides of the switchboard CUBICLE DESIGN AND COMPARTMENTS Enclosure and internal partitioning of the cubicles are of CRCA sheets, 2 mm thick. Every panel of the switchboard is divided in various compartments both for power equipment (busbars, circuit breaker, fused contractor, instrument transformers) and for auxiliaries (instrument compartment, wiring ducts for interconnections) which are segregated by metal partitions. MAIN BUSBAR COMPARTMENT This compartment located in panel upper back part contains the main busbar system, which is supported and connected to the circuit breaker fixed insulating contacts by means of branches. Depending on rated current they have to carry the main busbars are made of electrolytic copper or aluminium flat bars, suitable to withstand thermal and electro dynamic stress of a short circuit current.

• Automation Grade: Semi-Automatic
• Material: Stainless steel
• Phase: Three Phase
• Power Source: Electrical
• Voltage (V): 220/440 V
• Frequency (Hz): 50 to 60 Hz
• IP Rating: IP44

Power Factor can be interpreted as the ratio of active power to apparent power and it is a key factor in measuring electrical consumption. Everyone knows that how costly electricity has become in present time. Therefore it becomes very important to cut down on electrical expenditure. APFC Panels are real handy in the accomplishment of this function use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to the large electrical load. Immersion in Power Factor can attract operational losses and a penalty from electricity board, responsible for electricity supply. APFC Panels come real handy in the achievement of this purpose Use of these control panels becomes indispensable in those industries where electrical installations are meant to supply to the large electrical load. We are one of the best APFC Panels manufacturers in Bangalore.

As a quality oriented organization, we, Vajra Controls in Bangalore are engaged in manufacturing and supplying a broad array of Main Power Distribution Panel. The offered power distribution panel is widely used at the residential, commercial and industrial places, for enclosing the electrical circuitry and wiring. We offer these panels in various dimensions of sizes and width and also provide customization according to the specifications provided by the customers.

We manufacture and supply Manual Power Control Panels. Our Manual Power Control Panels are designed with advanced technologies. The Manual Power Control Panels offered by us are known for performance efficiency. We can offer Manual Power Control Panels in bulk quantities as well.

Our range of lighting panels and power distribution panel successfully serves the purpose of distributing power for the lighting system of plants. These power distribution panel are manufactured by our team of diligent professionals who has years of experience with them. Furthermore, these are panels are quality tested on well defined parameters before being delivered to our clients.

We manufacture and offer Power Control Center (PCC) Panels which are used for diverse industrial applications and provide reliable and effective service. We are effectively engaged in manufacturing of these panels upto 6300A busbar rating. These panels are manufactured as client's specifications and requirements which very well meet with the industry demands.These panels provide reliable and effective services for a long time to come and offer high controllability and distribution of power. Made from fine quality raw materials PCC Panels are extremely sturdy and we offer them in various sizes at competitive prices. This range of products are offered in fixed and draws out type configurations of ACBs.Salient Features: Main LT Panel, PCC With single, multiple incomers, bus couplers with proper interlocking Protection, fault indications, mechanical/electrical/PLC interlocking is provided Various designs are offered in PCC like top, Middle, Bottom Horizontal bus chamber, panel with aluminum/copper bus bars, top / bottom / front / rear cable termination, combinations of APFC Part with PCC Facilities like DG Incomer with AMF Functions, cut-off of non-essential feeders at the event of failure of mains power Panel with provision to connect bus duct at main incomer side

PCC panel is a power distribution board to control the power supplied to various loads in the Industries. PCC panels which are used for attaining maximum and efficient electric power utilization. PCC panels are designed to be used as Main Low Tension Panels in Power Stations, large Industrial Plants etc. and can be supplied with Air Circuit Breakers and isolators up to 4000A rating. Our range of PCC panels is widely used in power distribution in various process and production industries like refineries, chemical plants, dairies, refrigeration plant, pharmaceuticals and plastic industry. Features of our PCC panels are: Our panels are fabricated using high quality raw materials and are fitted with reliable components  procured from reliable vendors in the market Duly wired with ACB / SFU / MCCB / DOL / Star Delta / ATS Starters. Protection, fault indications, mechanical/electrical/PLC interlocking is provided Cubical type, Extensible on each side. Draw Out / Fixed Type, Single / Double Front Operated. Separate Busbar chamber at top Bottom and Vertical Droppers. The outer structure of the panels are coated using high graded powder coating which makes it long lasting and can withstand any climatic condition We can manufacture customized PCC panels to meet the custom requirement in accordance with industry standards.  

• Material: Mild Steel
• Voltage: 415V
• Features: Corrosion Resistance
• Phase Type: Three Phase
• Frequency: 50 - 60 Hz
• Mounting Type: Free Stand

To meet the diversified requirements of our prestigious clients, we are engaged in offering LTDB Panel that is available in a wide variety of specifications as per the exact requirements of clients. This panel is fabricated under the guidance of experienced professionals using supreme class components with the help of latest technology at par with international standards. The offered LTDB Panel is widely recognized for high performance, less maintenance, robust construction, corrosion resistance and reliability.

We design and manufacture Low Voltage, Medium Voltage and High tension Power Factor & Power Quality Solutions (Indoor & Outdoor Capacitor Panels etc.) as per customer requirements. The LV PFC system can be offered with contactor based Thyristor based (Please refer our product Thyristor Switch Module for further details). We customize the products and design as per the study conducted by us or by others as per recommendations.

• Brand Name: Imported
• Material: Aluminium/Glass
• Usage/Application: Solar Lighting
• Model: 6V 2.5W
• Type of Solar Panel: Poly Crystalline
• Wattage: 2.5W
• Performance Warranty: Upto 1 Year*

We offer LT panels that are engineered using high grade material. LT panel is a perfect example of excellence and performance. We keep an uncompromising endeavor towards perfection, quality and customer satisfaction in manufacturing LT panel. Our range of panels is suitable for high operational voltage and distribution system and finds application in power and motor control centers and other electronic devices.

• Rated Current: 1250 to 2500 A

The Power +F3O are an Outdoor 33kV SF6 Switchgear Panels. Outdoor Panels are of Kiosk Type construction with double door in the front. The Rear door that is both hinged and bolted for safety. Adequate slope given on roof top to drain rain water. Robust weather and dust proof IP55 degree of protection externally and IP2X between compartments. General Features: Modular & compact for better strength and flexibility in extension. Fully Compartmentalized construction for optimal safety and protection Our design enables adequate space for large cable sizes. Even larger cables and additional runs rear extension is provided for cost effectiveness. Independent exhaust vents for all HT compartment are provided for natural cooling and exit for any flue gasses. Dedicated Circuit breaker compartment as per internationally proven ABB design. Cassette mounted ABB Circuit Breaker with draw out feature for easy maintenance and fail-safe safety. Live parts covered by automatic metallic shutters when breaker is racked out. Electrical anti-pumping design avoids mishaps due to mishandling of the breaker. Additional feature includes a separate Racking in/out mechanism which is provided in the breaker which can change from “test” to “service” positions and vice versa with the cubicle door closed. Only Branded and type tested sub components are used in our panels. Current and Voltage transformers are placed in chamber below Circuit breaker to avoid any kind of flashovers which may damage the breaker. Wiring done with flexible copper cable affirming to IS 694 for Longitivity and Durability. Optional integral earth switch can be provided on the cable side for Earthing. We provide Foundation frame as standard supply All hinged doors are provided with gaskets to keep away dust and water from the electrical components. Multiple guides are provided for safe and sure engagement of fixed and moving contacts. Breaker trolley shall be given along with the breaker panel for maintenance.   Our Design Standards: Breaker IEC 62271-100 Current transformer IS 2705/1992 and IEC 60044-1 Potential transformer IS 3156/1992 and IEC 60044-2 Busbar IS 5082 for Aluminium Sheet Steel: IS 513 Cables IS 694 Special Features For Outdoor Kiosk Panels: Kiosk Type construction With Double door in the front shall be provided. Rear door is both hinged and bolted for safety. Adequate slope given on top roof to drain rain water, dust & Particles. Robust weather & dust proof – IP5X degree of protection externally & IP2X between compartments.

Power factor correction panel for correction of the power factor may be at a central substation, spread out over a distribution system, or built into power-consuming equipment.

• Operating Voltage: 240 V
• Usage/Application: Control Panel
• Frequency Range: 50 Hz
• Mount Type: Drill Mount
• Power Source: Electric
• Shape: Rectangle

We are offering the power +v are an indoor vcb switchgear panels of voltage range 3.3kv to 11kv and current ratings from 630a to 3150a. For compactness in panels rated up to 2000a special bus raiser panel is provided with bus coupler panel extended in the rear side. Ip4x degree of protection is provided externally and ip2x between compartments. Panels shall have adequate space for terminating large cable sizes. Our 11kv panels are carried out for internal arc test for 40ka for 1 sec.

We are a quality manufacturer, supplier and service provider of Metering Power Control Panels. These hi tech range of control panels are extremely suitable for heavy industrial units and engineering projects.